This medium steel ball corner from Penn Elcom has two mounting holes per leg, a PennBrite™ finish and a 1.2mm internal radius.
The Penn Elcom B1136z T-Corner Bracket has a 2mm interior radius, has been made from 1.2mm-thick steel and comes pre-drilled with 5mm mounting holes.
Designed to meet professional standards, this Penn Elcom ball corner is made from 1.5mm-thick steel, has a 2.5mm internal radius and a three-leg construction, each pre-drilled with two mounting holes.
Made by Penn Elcom, this solid steel box corner is fully prepped to securely finish off a self-build flight case or speaker cabinet. This edition comes in black.
The Penn Elcom B1925z brace is made of 1mm-thick steel, has a 1mm internal radius and comes with four 4mm pre-drilled mounting holes.
Finish your Penn Elcom profile E1671 with this purpose-made 55mm x 33mm stackable box-corner.
Built to sure up the corners of a flight case, the Penn Elcom C0670n flat corner is made from steel, comes pre-drilled with mounting holes and features a 1.6mm internal radius.
The Penn Elcom B1125z brace is made of 1.2mm-thick steel, has a 2mm internal radius and comes with four 5mm pre-drilled mounting holes.
This Penn Elcom ball corner is specifically made for 22mm extrusions. It's made of steel and has a 1.2mm internal radius to offer superb protection for the corners of your case.
The Penn Elcom C1821k cabinet corner has a two-leg design and an 11.3mm internal radius. It's made of 1.2mm-thick steel and comes with two pre-drilled mounting holes - one at each end.
The Penn Elcom C1364z ball corner has a leg-less design for an extra-direct mount. It's stackable and comes with six pre-drilled mounting holes.
This ball corner not only protects against impacts but reinforces your flight case at the same time. It's also easy to mount thanks to the three pre-drilled mounting holes.
This black cabinet corner from Penn Elcom protects and reinforces your custom speaker cab or flight case. It's made of steel and has three mounting holes - one per leg.
The Penn Elcom B1930z brace is made of 1.2mm-thick steel and measures 35 x 40mm. It has a 2mm internal radius and comes with four pre-drilled mounting holes for eased installation.
The Penn Elcom B1130-25-HINGE hinged corner brace is a handy two-in-one bit of rack/flight case hardware. It comes with twelve mounting holes and has an internal radius of 2mm in the middle and 5mm near the edges.
The Penn Elcom C7079z flat corner has been made from steel, has a 5mm internal radius and comes pre drilled with mounting holes for a neat finish to the corner of a self-build flight case.
Do you need to add style and durability to your suitcase? Thanks to four pre-drilled holes, this chevron corner can be easily attached to the corner of your suitcase.
This zinc-coloured Penn Elcom steel flat corner has three pre-drilled mounting holes with a diameter of 5 mm each. It is 49 x 49 mm and made from 1mm-thick steel.
Designed to meet professional standards, this Penn Elcom ball corner has a 30/30mm recess, a 2.5mm internal radius and a three-leg construction, each pre-drilled with two mounting holes.
Corner made of 1mm-thick zinc-coloured steel and is easy to mount thanks to three 5.5mm pre-drilled holes.
The Penn Elcom C0675/30 corner is specifically made for Slam Lid builds. As such, it's compatible with the L2470 Slam Latch; the E0490 extrusion and the P2472 hook.
Featuring a dented point, the Penn Elcom C1935z flat corner is stackable with the C1150z flat corner. This model is made from 1mm-thick steel and features a 4mm internal radius.
This zinc-coloured Penn Elcom steel ball corner has six pre-drilled holes with a diameter of 5 mm each.
A secure finisher for any heavier self-build flight case, this Penn Elcom stackable ball corner has an R5 radius, is made from 1.8mm-thick steel and features 30mm profile recesses.
This Penn Elcom zinc corner bracket has two pre-drilled holes and two rounded-off ends. It’s size is 32.2 x 19 mm and it is made of 1.2mm steel.
This Penn Elcom zinc-coloured steel ball corner has 3 pre-drilled holes, each with a diameter of 5 mm. It is 41 mm wide, 41 mm long and made from 1.2mm-thick steel.
The Penn Elcom B0700z brace is made of 1.2mm-thick steel, has a 1mm internal radius and comes with four 5mm pre-drilled mounting holes.
This 50mm by 42mm Penn Elcom T-corner bracket comes in a zinc-coloured finish and has been pre-drilled with six 5mm mounting holes to ease installation.
Designed to meet professional standards, this stackable Penn Elcom ball corner has a 3mm internal radius and a three-leg construction where each leg comes pre-drilled with two mounting holes.
This Penn Elcom zinc corner bracket has four pre-drilled mounting holes. Its size is 20 x 37 mm and it is 1.2 mm thick.
Ideal for reinforcing the corner of a box or flight case, the Pen Elcom C1819k box corner is made from steel, features a 12mm internal radius and comes in black.
This Penn Elcom cabinet corner is made of black plastic and can be installed to reinforce the corners of a custom speaker. This model is stackable and comes with four pre-drilled holes to ease mounting.
This Penn Elcom ball corner features a legless design and has been pre-drilled with six mounting holes so it can be directly mounted onto the profile of a DIY flight case for a tight and reinforced finish.
The Penn Elcom C1150 medium flat corner has a 4mm internal radius and features three 5mm mounting holes. It's made of steel and is stackable in combination with its female counterpart (C1935).
Mount a Penn Elcom C1819 wrap-around corner on every corner of your custom speaker cabinet and ensure solid protection against knocks and bumps. This edition has a 12mm internal radius and a two-legged design with two 4mm mounting holes.
This Penn Elcom zinc corner bracket has four pre-drilled holes and two rounded-off ends. It’s 31.2 x 40 mm in size and consists of 1.2mm steel.
The Penn Elcom B1130-25 brace has a 2mm as well as a 5mm internal radius, making it that bit more flexible. It's made of steel and comes with four 5mm pre-drilled mounting holes.
The Penn Elcom C1080Z ball corner is made of steel, has a 1mm internal radius and comes with three pre-drilling mounting holes for eased installation. This version has a zinc-coloured finish.
The Penn Elcom C1374/10z neatly combines a ball corner with a corner brace. The model is 78mm long, has a 4.5mm interior radius and comes pre-drilled with six 5mm mounting holes.
This 50mm by 40mm Penn Elcom T-corner bracket comes in a zinc-coloured finish and has been pre-drilled with six 5mm mounting holes to ease installation.
This Penn Elcom designed flat corner has a 5mm internal radius and comes finished with a foot, making it the ideal finisher for the base of a flight case.
Featuring an interlocking cut-out, this stackable Penn Elcom ball corner helps to ensure secure transportation of your custom flight cases. It's made of steel and comes with three pre-drilled mounting holes.
A robust ball corner suitable for heavy-duty transport. When several flight cases need to be stacked for transport, this ball corner is the solution.
Built to meet professional standards, this Penn Elcom ball corner is made from 1.5mm-thick steel, has an R2 internal radius, has been recessed to fit 30mm profiles and features a stackable design.
This corner section from Penn Elcom is suitable to form a solid corner together with the NC2HCBK corner section. Ideal for your self-built flight cases.
Made of steel, this Penn Elcom-designed ball corner protects the contents of your custom flight case against bumps and knocks. This model is stackable and comes with three mounting holes.
With the Penn Elcom B0702z, you have a nicely finished oversight corner. The oversight corner is made of a very strong metal and the sides are nicely rounded. The pre-drilled holes have a diameter of 5 mm.
Made from solid steel and featuring recesses for 30mm profiles for a flush finish, this Penn Elcom ball-corner can be installed to protect a hard-working flight case and its contents.
Filters
Filters