Penn Elcom oversight corner with 6 pre-drilled holes. This sturdy overlay corner is made of high-quality material and has nicely rounded ends. The dimensions are 51.5 mm x 47 mm.
This zinc-coloured Penn Elcom steel ball corner is equipped with six pre-drilled holes with a diameter of 5 mm each. Its dimensions are 65 x 65 mm and it is made of 1.8mm-thick steel.
The Penn Elcom B1130-25-HINGE hinged corner brace is a handy two-in-one bit of rack/flight case hardware. It comes with twelve mounting holes and has an internal radius of 2mm in the middle and 5mm near the edges.
Featuring a dented point, the Penn Elcom C1935z flat corner is stackable with the C1150z flat corner. This model is made from 1mm-thick steel and features a 4mm internal radius.
The Penn Elcom B1925z brace is made of 1mm-thick steel, has a 1mm internal radius and comes with four 4mm pre-drilled mounting holes.
Built to meet professional standards, this Penn Elcom ball corner is made from 1.2mm-thick steel, has an 0.8mm internal radius, has been recessed to fit 30mm profiles and has been designed to finish off flight case lids.
The Penn Elcom C7079z flat corner has been made from steel, has a 5mm internal radius and comes pre drilled with mounting holes for a neat finish to the corner of a self-build flight case.
This zinc-coloured ball corner from Penn Elcom provides excellent protection for your flight case. It is made of steel with three mounting holes, has an offset for 30-millimetre profiles and is stackable.
This Penn Elcom zinc-coloured steel ball corner has 3 pre-drilled holes, each with a diameter of 5 mm. It is 41 mm wide, 41 mm long and made from 1.2mm-thick steel.
The Penn Elcom C1343z ball corner is made of steel, has a 1mm internal radius and is compatible with 22mm extrusions. Install one at every corner of your DIY flight case and be assured of optimum protection.
Featuring an interlocking cut-out, this stackable Penn Elcom ball corner helps to ensure secure transportation of your custom flight cases. It's made of steel and comes with three pre-drilled mounting holes.
Designed to meet professional standards, this Penn Elcom ball corner is made from 1.5mm-thick steel, has a 2.5mm internal radius and a three-leg construction, each pre-drilled with two mounting holes.
This medium steel ball corner from Penn Elcom has two mounting holes per leg, a PennBrite™ finish and a 1.2mm internal radius.
Made by Penn Elcom, this solid steel box corner is fully prepped to securely finish off a self-build flight case or speaker cabinet. This edition comes in nickel.
This 50mm by 40mm Penn Elcom T-corner bracket comes in a zinc-coloured finish and has been pre-drilled with six 5mm mounting holes to ease installation.
The Penn Elcom C1150 medium flat corner has a 4mm internal radius and features three 5mm mounting holes. It's made of steel and is stackable in combination with its female counterpart (C1935).
Need to properly protect the corners of your heavy duty flight case? That's perfectly possible with ball corners like these from Penn Elcom. Made of sturdy steel and equipped with six mounting holes and, finally, an internal radius of three millimetres.
This rugged flat corner fits any 30 x 30 mm angle extrusion.
A robust ball corner suitable for heavy-duty transport. When several flight cases need to be stacked for transport, this ball corner is the solution.
A secure finisher for any heavier self-build flight case, this Penn Elcom ball corner has a 5mm internal radius, is made from 1.8mm-thick steel and has a 30mm offset.
Made from 1.2mm-thick steel, this Penn Elcom case corner has a 12mm internal radius and a neat and flat, stackable design.
The Penn Elcom B1131 brace bracket is made of 1.2mm-thick steel, features six pre-drilled mounting holes and measures 51.5 by 42mm. The internal radius is 1.5mm.
Built to sure up the corners of a flight case, the Penn Elcom C0670n flat corner is made from steel, comes pre-drilled with mounting holes and features a 1.6mm internal radius.
The Penn Elcom NC2C3K three-legged corner is perfectly compatible with NC2DAE double extrusions and increases the strength of your custom-made flight case.
This Penn Elcom designed flat corner has a 5mm internal radius and comes finished with a foot, making it the ideal finisher for the base of a flight case.
The Penn Elcom N-Case 2 Corner section can be fitted to the lower profile of a DIY flight case, reinforcing the build and improving the strength and durability.
This corner section from Penn Elcom is suitable to form a solid corner together with the NC2HCBK corner section. Ideal for your self-built flight cases.
Built to meet professional standards, this Penn Elcom ball corner is made from 1.5mm-thick steel, has an R2 internal radius, has been recessed to fit 30mm profiles and features a stackable design.
A sturdy flat angle for use, for example, in combination with various types of Penn Elcom insert profiles or angle profiles. Made of steel, fitted with three legs and an internal radius of five millimetres.
Mount a Penn Elcom C1819 wrap-around corner on every corner of your custom speaker cabinet and ensure solid protection against knocks and bumps. This edition has a 12mm internal radius and a two-legged design with two 4mm mounting holes.
Made of 2mm-thick steel, this Penn Elcom-made ball corner offers solid protection against bumps and knocks. It has a 3mm internal radius and comes with six 5mm pre-drilling mounting holes.
This rugged flat corner can is ideal for your DIY flight case. It offers optimal protection against hits during transport.
Busy building a flight case? Be sure to finish it with ball corners such as the Penn Elcom C1351/00/R5z to make it extra strong.
Made from solid steel and featuring recesses for 30mm profiles for a flush finish, this Penn Elcom ball-corner can be installed to protect a hard-working flight case and its contents.
This Penn Elcom brace features four 5mm pre-drilled holes and comes with rounded corners and a stainless steel finish. Dimensions: 40 x 30mm.
Building your own black-edition flight case? Finish it in style with the Penn Elcom C1339/30K black ball corner. Made of 1.8mm-thick steel, this strong three-legged ball corner has an internal radius of 2.5mm and a 30mm offset. Each leg has two 5mm mounting holes.
With this B1115z, you are assured of a high-quality oversight angle. It is made of metal and has two pre-drilled holes. The ends of the oversight angle are nicely rounded and the metal is 1.4 mm thick.
This corner brace from Penn Elcom is made of 1.2mm-thick steel, features rounded corners and measures 29 by 40mm. The internal radius is 2mm.
Guard the corners of your flight case from impacts with ball corners like this one from Penn Elcom. It is made of sturdy steel, has six pre-drilled holes for mounting and an offset for a 30/30 profile.
The Penn Elcom C1374/10z neatly combines a ball corner with a corner brace. The model is 78mm long, has a 4.5mm interior radius and comes pre-drilled with six 5mm mounting holes.
Made of 1.2mm-thick steel and according to professional Penn Elcom specifications, the B1130S corner bracket with a 5mm internal radius and comes pre-drilled with four 5mm mounting holes.
Protect the corners of your flight case during transportation with this robust Penn Elcom ball corner.
Are you building your own flightcase? Use this steel stacking foot for efficiency and ease! Attach stacking feet to your flightcase and you'll be able to stack it.
Polish off that self-build flight case with this Penn Elcom stacking foot and be assured of a safe and secure stackable finish. This steel foot is made to fit the male F0615 stacking foot.
Penn Elcom oversight corner measuring 40 x 32 mm. The ends are nicely rounded, has 4 pre-drilled holes and is made of high-quality metal.
Finish your flight case with ball corners like the Penn Elcom C0658z large offset ball corner and be assured of maximum strength and protection.
Designed to meet professional standards, this Penn Elcom ball corner has a 5mm internal radius and a short, three-leg construction where each leg comes pre-drilled with a mounting hole.
This medium ball corner from Penn Elcom protects the corners of your flight case from shocks. It succeeds well because it is made of sturdy steel. Furthermore, it features a resistance for 30/30 profiles and 3 mounting holes.
Filters
Filters