Penn Elcom

Penn Elcom T1513/200 Cable Binder, 200 x 13mm (Single, Black)

Neatly bundle cables, cut down on stress and cut down on detangle-time with this Penn Elcom designed cable tie. Finished in black, this hook-and-loop cable tie is 20cm long and 1.3cm wide.

Penn Elcom T1513/300 Cable Binder, 300 x 13 mm (Single, Black)

Neatly bundle cables, cut down on stress and cut down on detangle-time with this Penn Elcom designed cable tie. Finished in black, this hook-and-loop cable tie is 30cm long and 1.3cm wide.

Penn Elcom Carpet for boxes black (per 1.83 square metre)

<p>Are you busy making your own speaker? Once you’re done with the housing, you can brighten it up with this carpet. The carpet is 183 centimetres wide and one metre long.</p>

Penn Elcom B1123z T-corner bracket, 51 x 47 mm

Penn Elcom cable tie 30 cm long (delivered per single piece)

Invest your time in strapping this cable-tie to your cables once, and you will be to bind them together simply every time from then on.

Penn Elcom T1513/300b Cable Binder, 300 x 13 mm (Single, Blue)

Penn Elcom ball corner 41 x 41 mm

This Penn Elcom zinc-coloured steel ball corner has 3 pre-drilled holes, each with a diameter of 5 mm. It is 41 mm wide, 41 mm long and made from 1.2mm-thick steel.

Penn Elcom B1130-25z Double Radius Brace (29 x 40mm)

The Penn Elcom B1130-25 brace has a 2mm as well as a 5mm internal radius, making it that bit more flexible. It's made of steel and comes with four 5mm pre-drilled mounting holes.

Penn Elcom Swivel Castor Wheel, 100mm

Swivel caster with a 100 mm diameter. Comes with pre-drilled mounting holes and has a zinc colour finish.

Penn Elcom C0696z flat corner 54mm R5

<p>This rugged flat corner can is ideal for your DIY flight case. It offers optimal protection against hits during transport.</p>

Penn Elcom 0491 Slam-Lid Profile, 10mm

The Penn Elcom 0491 Slam-Lid profile has a 10mm interior depth and is fully compatible with the EG-0100 angled extrusion, both in terms of finish and grooves.

Penn Elcom C1351/00/R5z Large Offset Ball Corner

Busy building a flight case? Be sure to finish it with ball corners such as the Penn Elcom C1351/00/R5z to make it extra strong.

Penn Elcom C1375z Large Heavy-Duty Ball Corner

Made of 2mm-thick steel, this Penn Elcom-made ball corner offers solid protection against bumps and knocks. It has a 3mm internal radius and comes with six 5mm pre-drilling mounting holes.

Penn Elcom L904/914Z Recessed Butterfly Latch, Small

This Penn Elcom designed butterfly latch is made of steel and features a zinc finish. Lockable with tie-wraps, this recessed latch can be used to finish a flight case.

Penn Elcom 0126 aluminium angle extrusion 25 x 25 x 1.5 mm

Are you building a flight case for your valuable equipment? With this aluminium angle extrusion you will be able to finish it off nicely! Keep your flight case secure and protected turning transport.

Penn Elcom B0706n Corner Bracket, 27 x 15mm

Made from heavy-duty metal, the Penn Elcom B0706n corner bracket features rounded corners and pre-drilled mounting holes.

Penn Elcom C1346z Brace Ball Corner

Designed by Penn Elcom, this brace-and-ball-corner in one is made of steel and comes with a 30mm offset on one leg only, making it a solid piece of hardware for lidmaker extrusions.

Penn Elcom B1126z T-Corner Bracket, 50 x 40mm

This 50mm by 40mm Penn Elcom T-corner bracket comes in a zinc-coloured finish and has been pre-drilled with six 5mm mounting holes to ease installation.

Penn Elcom B1631z Panel Divider, 9.2mm

The Penn Elcom B1631z bracket can be used to install a 9.2mm panel to serve as an interior divider. This is a solid finisher for any self-build flight case in need of interior compartments.

Penn Elcom flat corner 37 mm R2

Corner made of 1mm-thick zinc-coloured steel and is easy to mount thanks to three 5.5mm pre-drilled holes.

Penn Elcom C1824k 38mm, 12mm 2-Arm Box Corner (Black)

Made by Penn Elcom, this solid steel box corner is fully prepped to securely finish off a self-build flight case or speaker cabinet. This edition comes in black.

Penn Elcom B1641z 4-Way Divider Bracket

Want to compartmentalise a flight case? The Penn Elcom B1641z steel divider brace is compatible with 9.2mm (3/8") panels, measures 70 x 70 x 15mm and comes with pre-drilled screw holes.

Penn Elcom H7150/06 backplate for H7150 handle

Penn Elcom C1359z Brace Ball Corner

This ball corner not only protects against impacts but reinforces your flight case at the same time. It's also easy to mount thanks to the three pre-drilled mounting holes.