These M8 bolts from Penn Elcom are 20mm long and can be used to build secure flight cases.
Penn Elcom's SG-9407 steel flange bolt has an M6 hex head and is 16mm long. It features a self-locking design including a knurled ring.
The Penn Elcom B3001 steel mounting bracket is made for securing boards and panels inside flight cases. It's made of 1.2mm steel and is 17.5mm long (horizontally).
Avoid scratches when installing gear into a 19" rack with this pack of Penn Elcom plastic washers. These M6-sized washers come in a pack of 100 and have a black finish.
The Penn Elcom B1630z bracket can be used to install a 6.7mm panel to serve as an interior divider. Made from 1.2mm-thick steel and pre-drilled with 5.2mm mounting holes, this is a solid finisher for any self-build flight case.
Want to compartmentalise a flight case? The Penn Elcom B1641z steel divider brace is compatible with 9.2mm (3/8") panels, measures 70 x 70 x 15mm and comes with pre-drilled screw holes.
The Penn Elcom W0098-FM is a handy little mounting plate for castor wheels. It comes with four M8-threaded mounting points and makes securing castors to flight cases as quick-and-easy as possible.
You cannot do without this set of 100 T-nuts when you are building a flightcase. After all, you want to make sure that your equipment is safely stored. These T-nuts are fit for M8 bolts.
Max-out the functionality of your flight case by installing this set of table latches and set up the case lid as a neat side table.
The Penn Elcom B1631z bracket can be used to install a 9.2mm panel to serve as an interior divider. This is a solid finisher for any self-build flight case in need of interior compartments.
Looking for a way to turn a flight case into a table? This Penn Elcom designed table leg is the solution. Combine it with some Penn Elcom table mounting latches and there you go!
This Penn Elcom L0915 castor board catch plate fits 12mm-thick wood panels and comes finished in black.
A sturdy steel lifting eye in a black finish, this H1435k from Penn Elcom. It is fixed in a dish with four mounting holes and is fitted with a spring so it always folds back into the dish.
This small stacking dish from Penn Elcom makes stacking flight cases a lot easier. This is because the wheels of the top case are placed in the saucer, preventing them from rolling out.
Specially designed for Penn Elcom W0985 and W0990 castor wheels, the W009 wheel plate is made from solid aluminium and comes pre-drilled with mounting holes configured to match the base of a castor wheel.
Make sure your flight case is firmly fixed to your wheel plate using a lock holder like this one from Penn Elcom. This version comes in matt black and fits 18-millimetre-thick wood.
You use this back plate from Penn Elcom for the lifting eye H1435 also from Penn Elcom. This sturdy plate is made of steel and features four mounting holes for easy attachment.
This Penn Elcom zinc lock eye features two pre-drilled holes. It measures 12 x 17.5 x 14.5 mm.
Door made of steel and has a black colour. Easy to install using the pre-drilled holes. This door is lockable using a lock and key.
This anti-shock rubber is very useful when fixing your TV lift in a flight case.
The Penn Elcom B1141z L-hook has been made from 1.2mm-thick steel and finished with two 20mm wide legs, each pre-drilled with two 5mm mounting holes.
The Penn Elcom B1640z is a 1.2 mm thick steel mid-mount compartment divider. It is suitable for panels with a thickness of 6.5 mm and has nine pre-drilled mounting holes with a diameter of 5.2 mm. 70 x 70 x 15 mm.
The Penn Elcom H1435 spring shackle comes pre-installed in a dish with four mounting holes. Its spring-loaded design ensures it always snaps back into its original position.
Make sure your flight case is firmly fixed to your wheel plate using a lock holder like this one from Penn Elcom. This version is zinc-coloured and fits wood 15 millimetres thick.
Make sure your flight case is firmly fixed to your wheel plate using a lock holder like this one from Penn Elcom. This version is zinc-coloured and fits wood 18 millimetres thick.
The Penn Elcom R8860/50 is a set of eight shock mounts, which can be loaded to 50 kilograms and feature metric threaded M6.
This set of eight Penn Elcom R8860/90 shock mounts can bear a 90 kilogram load and come finished with an M6 screw hole. The perfect finishing touch for the Penn Elcom R8800 anti-vibration rack mounting system.
The Penn Elcom R8860/200 is a set of eight shock mounts, which can be loaded to 200 kilograms and feature metric threaded M6.
With this stacking dish from Penn Elcom, you can safely stack flight cases without worrying about them falling off. This is because the wheels of the top case fit perfectly into the saucer of the bottom one. How convenient.
Penn Elcom has intended this wheel plate for casters W0985/80 and W0990/80 so these fit perfectly. Likewise, the mounting holes are placed in the same configuration as those of the wheel.
Filters
Filters