Gamechanger Audio PLUS Pedal II Footswitch for wet, latch and hide modes

General

The Gamechanger Audio PLUS Pedal II Footswitch is an accessory for the PLUS Pedal II and makes live performance and recording just that little bit quicker and more organised. You can switch the PLUS Pedal II’s three operating modes on or off instantly, without having to perform any additional actions on the pedal itself. In addition, this footswitch features a separate Dry Out, allowing you to easily route the dry signal to, for example, a second amplifier or a tuner. Ideal if you want to keep your sustain layers and your dry sound separate.

Three modes: WET, LATCH and HIDE

With a single tap, you can switch to the mode you need. In WET mode, you bypass the dry signal from the main output, leaving you with only the sustained layers. LATCH is perfect if you want to keep the sustain effect active continuously without having to keep the brass pedal pressed down. And with HIDE, you can temporarily (and gradually) mute the dry signal whilst using the brass pedal. This allows you to control, musically and precisely, when your dry sound is audible or not, even in the middle of a phrase.

Connections and signal routing

Connecting is simple: use the supplied “PLUS” TRS cable to connect the footswitch to the PLUS Pedal II. From there, you have a 6.3 mm mono Dry Out at your disposal to route your dry signal to another destination, such as an additional amp or a tuner. The status LED provides feedback at a glance whilst in use. As this is a dedicated footswitch for the Gamechanger Audio PLUS Pedal II, everything connects logically straight away and feels like an integrated part of your setup.