Morley Hum Removal Toolbox

Sustainable product	not specified
type of analogue input	XLR (balanced), TRS jack (balanced), TS jack (unbalanced)
Analogue audio output type	XLR (balanced), TRS jack (balanced), TS jack (unbalanced)
number of channels	2

conversion level	other
Complete	~
Original packaging	~
Condition of product	~

Sustainable product	not specified
type of analogue input	not applicable
Analogue audio output type	not applicable
number of channels	1

conversion level	no conversion
Complete	~
Original packaging	~
Condition of product	~

Morley Hum Removal Toolbox
Product no: 9000-0133-2144 Bax Music Warranty: This product comes with a 3-year warranty.

General

With the Morley Hum Removal Toolbox, you can eliminate 90% of all unwanted hum and buzz in the studio or on stage. This kit includes the Hum Eliminator and the HUMNO noise eliminator and, as Morley puts it, "if one doesn't solve the hum issue, the other will!" The HUMNO takes care of hum coming from the AC power supply, filtering the ground line of excess low voltage and current that can cause noise, while the Hum Eliminator focusses on noise travelling through the audio cables between different bits of kit and effectively filters out any interference. Also, it's worth noting that the HUMNO is NOT a ground lift and that the Morley Hum Removal Toolbox is a lot cheaper than buying both noise-removers separately.

Specifications

Product features

Number of channels	2
Sustainable product	not specified
Conversion level	other
Analogue audio output type	XLR (balanced), TRS jack (balanced), TS jack (unbalanced)
Type of analogue input	XLR (balanced), TRS jack (balanced), TS jack (unbalanced)

Weight and dimensions including packaging

Weight (incl. packaging)	665 gr
Dimensions (incl. packaging)	20,0 x 12,5 x 8,0 cm

Product specifications

Morley Hum Removal Toolbox
Hum Eliminator:
- inputs: 2x jack (TS and TRS), 2x XLR
- outputs: 2x jack (TS and TRS), 2x XLR
- counters humming and buzzing in the studio or on stage
- automatically switches between balanced and unbalanced connections
- makes it possible to use long cables without interference
- interrupts ground loops and leaves all signal grounds intact
- prevents clipping by translating signal voltages
- frequency response: 10Hz to 50kHz, approx. 0.5dB
- THD: < .005% at 1 kHz
- crosstalk: > -97dB
- dimensions: 121 x 89 x 67mm
HUMNO noise eliminator cable for amplifiers
- eliminates hum and noise at the source
- filters the ground line of excess low voltage and current that can cause noise
- maintains proper ground
- NOT a ground lift
- simply connects to the power input of your gear
- compatible with:
  - guitar amps
  - bass guitar amps
  - PA systems
  - active monitors
- max. recommended current: 8A
- handy LED status indicator
- dimensions: 482.6 x 40.64 x 25.4 mm

Write a review

Reviews from other countries

Translate all reviews into English View original reviews

Rich February 16, 2025

Wrote the following about Morley Hum Removal Toolbox

Ik had de toolbox aangeschaft vanwege ongewenste geluiden in mn thuisstudio, ook t geluid van internet wat aanstaat. Helaas werkte deze toolkit bij mij niet. Dat zegt niet dat hij t niet doet, voor mijn probleem thuis iig niet.
Later tijdens ns gig in n theater een aardlus….had m toen kunnen uitproberen maar was al retour.
De kit is iig compact en stevig. De bedrading van de humno is wel stug te noemen overigens.
Benieuwd naar andere reactie’s. Bax thanks