The Tone City TPS-10 is a fully isolated multi-power supply with ten outputs, switchable voltages ranging from 6 to 18V, and a 5V/1A USB output.
This Hotone PSD-10 Power Supply is a power adapter for the Hotone Nano Legacy amplifiers. It provides 19V DC with a current rating of 4.74A.
Kitted out with dual isolation and noise suppression tech, the Valeton VPS-6 Multi-Pedal Power Supply can feed an array of effect pedals, supports various voltages, features multiple safety circuits and can be used worldwide.
With this RockBoard Power Ace 25 multi-regional DC adapter for effect pedals, you supply your effect pedals with 9V DC power with an availability of as much as 2500 mA
The RockBoard Power Ace Set compiles a 9V guitar pedal power supply, various converter cables, an 8-way daisy chain cable, and a battery clip converter cable.
J. Rockett's Juice Joint Bundle sets you up with a rugged effect pedal power distributor that can help feed up to seven 9V DC pedals without the noise you risk using daisy-chain.
JHS Pedals drop the Volture: a 9V sag effects pedal that you can stick between your fuzz, drive or distortion pedal and your power supply for the singular sound of a vintage stompbox powered by a battery that's running low.
The Rockboard Power Mod ISO DC 1 PS power supply can be used to power your Rockboard Power Mod ISO DC 1 pedalboard power supply. Keep one as a back-up or use it to replace a missing original unit.
The NUX Zeus pedalboard power supply features ten DC power outlets driven by individually switching transformers, resulting in a stable power supply and zero noise. Power cable pack included.
Suitable for effects pedals, this RockBoard Power Ace power adapter delivers 9V DC with a current of 1700 mA.
The smart widget that is the RockBoard IVC 200 Intelligent Voltage Converter operates at 200mA, converting a 9 Volt to 15 Volt input into an 18 Volt output for more power-hungry pedals.
The Palmer PWT 12 IEC Power Supply equips your pedalboard with no-less-then twelve individually isolated outputs, including two outputs that can be set to 6, 9, 12, 15 or 18 Volts to feed more awkward pedals.
The Palmer PWT 06 IEC pedalboard power supply is equipped with six isolated DC outputs, four of which can be set to 9V or 12V and one of which can be set between 6V and 18V as needed.
The Palmer PWT 08 MK2 is a multi-output power supply for effects pedals and pedalboard. As many as 8 pedals can be powered with it.
Palmer's PWT 12 MK 2 multi-pedal power supply unit is designed for guitarists who have 9V DC pedals but want to add some stomp boxes to their setup that require 6, 12, 15 or 18 volts.
The solid Palmer PWT 05 MK 2 power supply can be set up to feed a pack of five effect pedals with fully isolated power. This little box delivers 250mA per output.
If you have 4 standard effects pedals that each require 9 volts of DC power, or are you tired of daisy-chaining? The Palmer PWT 04 multi-pedal power supply unit is the answer!
The universal Palmer Powerball comes armed with eight centre-negative power outputs with adjustable voltage to feed your arsenal of pedals with that much needed power.
The Palmer PWT 08 MK2 is a multi-power supply for effects pedals that can be rack-mounted.
The Palmer WT PB 60 is the perfect accessory for your Pedalbay 60. It provides a power supply fully integrated into the pedalboard for as many as eight pedals.
With the Eventide Universal Power Supply for H90, you get a power supply specifically designed for the H90 H90 Harmoniser Multi-Fx effect pedal.
Eventide is a household name in the studio and live world when it comes to guitar effects. However, with the PowerMax and this PowerMini, they now also serve the guitar effects power supply segment. The PowerMini is a real powerhouse.
Eventide has been a household name in the world of guitar effects gear since the 1980s and is now taking a big step forward in guitar effects power supplies. Eventide's flagship product is called 'PowerMAX v2'.
The KA189 is a power adapter for the Korg AX pedals, D4, DT3, DT7, DT10, Electribe A, M, R & S, GT3 and GT12/120.
Did you lose or break the VOX DA5 adapter for your ToneLab ST multi-effect processor? No problem! The VOX KA259 will get you back in business.
The Eventide PowerMini EXP is similar to the 'regular' PowerMini, but instead of the power adapter it has a cable that you need to connect to the PowerMax multi-power supply. This allows you to power a maximum of 12 pedals.
This Eventide Universal Power Supply works with the Eventide Dot9, MixingLink and Rose effect pedals.
Compatible with most effect pedals, the EBS AD-9 PRO 9V DC, 1,000mA power supply can be coupled with a daisy chain to feed up to twenty stompboxes with power.
The MXR M242 Iso-Brick Pro is a high-quality pedalboard power supply in a compact and lightweight housing that can be mounted using the included hardware or set up as a standalone unit.
De One Control Distro MKII voedt je effectpedalen via tien geïsoleerde uitgangen, inclusief een regelbare 9-18V-uitgang. Ook te gebruiken met de One Control Daisy Chain Five.
Built to feed models including the Mooer GE300 and GE300 LITE with necessary power, the Mooer 9V DC Power Adapter comes fitted with a standard 2.1 barrel plug and provides a maximum 3,000mA.
The D'Addario XPND Pedal Power Battery Kit is a smart and powerful solution for your pedal-powering needs.
With T Rex's Fuel Tank Classic power supply you'll never need to replace the batteries in your effects pedals again. This device has eight 9V DC outputs, a 12V DC output and a 12V AC output giving you a total of 1500 mA.
The T-Rex Fuel Tank Junior power divider for effects pedals features 5 separate isolated 9-volt outputs of 120 mA each, and comes with the necessary cables. If desired, you can combine with 2 outputs up to 1x 18 volts.
Truetone's 1 SPOT Pro CS6 is the world's first low profile power brick with switchable voltages. Thanks to its compact size it fits easily on or under your pedalboard. With 1600mA of power, the CS6 can run up to 6 effects pedals.
Feed an eight-stompbox-strong pedalboard with the help of the Stagg BLAXX 12V power supply pack. This little unit is just 9cm long and 3.5cm wide, and has eight 9V 300mA ports with a maximum output of 2A.
The Electro Harmonix EU96DC-200BI adapter is a much more reliable way to power your 9V EHX stomp boxes than a 9V battery. It supplies 200 mA at 9.6 volts.
This official Electro Harmonix power supply can be used to feed older, more specific EHX effect pedals. This 9V, 100mA model comes fitted with a 3.5mm mini-jack connection plug.
Electro Harmonix's MOP-D10 Isolated Power Supply allows you to power up to 10 effects pedals from 9 volts DC without experiencing humming noises. This is because all outputs are isolated.
The Electro Harmonix EU24DC-100 is a 24V/100mA power adapter for effect pedals such as the Deluxe Memory Man, Stereo Memory Man, Micro Synths, Q-Trons, Polychorus, The Worm and Deluxe Electric Mistress.
The Electro Harmonix EU18DC-500 18V DC power supply has a 500mA output capacity and a centre-positive polarity, making it compatible with EHX pedals like the Flanger Hoax, Original POG and Holier Grail.
With 12V DC and 1500 mA output, and a standard 2.1 x 5.5 mm barrel connection (centre positive), this RockPower NT 12 Power Supply Adapter 12V DC power adapter is suitable for a variety of effects pedals.
Truetone's XP8-PS is the ultimate compact multi-power supply that includes an adapter that you can easily link to other Truetone expansion boxes. The 9V DC outputs provide up to 500mA each.
Truetone's 1 Spot Pro CS11 offers several voltage options that allow you to power almost all types of effects pedals. The 11 fully isolated outputs are all rated for 9V DC. Other voltages are also provided.
Next to a 12V AC and an 18V DC output, the T-Rex Fuel Tank Goliath pedalboard power supply features another five outputs that offer 450 mA of current and can each be switched from 9 to 12V DC.
Using the Truetone 1 Spot Pro XP5, you can easily add 5 additional isolated outputs to your CS11 of the same brand. Each output delivers 9V and can handle 500mA of current consumption.
Truetone's 1 Spot Pro XP5-PS is a package that includes an XP5 combined with a 12V DC adapter capable of delivering up to 2500 mA. That way, you can easily power the XP5 without using a CS11.
This 9.6V adapter will save you plenty of batteries for the ToneCore stomp boxes.
