Based on more than 21,240 customer reviews

Shure BRH31M-NXLR4F 4-Pin XLRF Headset

no reviews yet
Shure BRH31M-NXLR4F 4-Pin XLRF Headset

Discontinued

This product can no longer be ordered

Specifications

Product features

Active noise suppression
No
Wireless
No
Rotatable earpad
No
Sustainable product
Not specified
Headphone weight
80g
Headphone construction
Closed
Headphone impedance
150-199 ohms
In/on/over ear
On-ear
Includes microphone
Yes
Design can be folded/dismantled
No
Removable cable
No
Cable length
150-199 cm
Colour
Black
Maximum frequency
15 - 15.9 kHz
Minimum frequency
50 - 59 Hz
Polar pattern
Cardioid
Audio connector
4-pin XLR
Type of microphone
Dynamic
Headphone design
Slim
Volume control
No

Weight and dimensions including packaging

Weight
200 gr
Dimensions
20,0 x 20,0 x 5,0 cm

Product specifications

  • Shure BRH31M-NXLR4F
  • single-sided broadcast headset
  • microphone:
    • dynamic, neodymium, 12.5 mm
    • directional characteristic: cardioid
    • frequency response: 50 Hz - 15 kHz
    • output impedance: 150 Ohm
    • sensitivity: -66.5 dBV/Pa
  • headphones:
    • dynamic, neodymium
    • driver: 30 mm
    • frequency response: 150 Hz - 12 kHz
    • sensitivity: 101 dB SPL/mW
    • impedance: 220 ohms
    • max. input power: 200 mW
  • cable:
    • 1.75 m
    • connector: XLR-f 4-pin
  • weight without cable: 81 g
  • weight with connector: 125 g
  • included accessories:
    • 2x replacement padded ear cushions (BCAEC31)
    • 1x wind cap (BCAWS1)

No alternatives found

Specifications

Product features

Active noise suppression
No
Wireless
No
Rotatable earpad
No
Sustainable product
Not specified
Headphone weight
80g
Headphone construction
Closed
Headphone impedance
150-199 ohms
In/on/over ear
On-ear
Includes microphone
Yes
Design can be folded/dismantled
No
Removable cable
No
Cable length
150-199 cm
Colour
Black
Maximum frequency
15 - 15.9 kHz
Minimum frequency
50 - 59 Hz
Polar pattern
Cardioid
Audio connector
4-pin XLR
Type of microphone
Dynamic
Headphone design
Slim
Volume control
No

Weight and dimensions including packaging

Weight
200 gr
Dimensions
20,0 x 20,0 x 5,0 cm

Product specifications

  • Shure BRH31M-NXLR4F
  • single-sided broadcast headset
  • microphone:
    • dynamic, neodymium, 12.5 mm
    • directional characteristic: cardioid
    • frequency response: 50 Hz - 15 kHz
    • output impedance: 150 Ohm
    • sensitivity: -66.5 dBV/Pa
  • headphones:
    • dynamic, neodymium
    • driver: 30 mm
    • frequency response: 150 Hz - 12 kHz
    • sensitivity: 101 dB SPL/mW
    • impedance: 220 ohms
    • max. input power: 200 mW
  • cable:
    • 1.75 m
    • connector: XLR-f 4-pin
  • weight without cable: 81 g
  • weight with connector: 125 g
  • included accessories:
    • 2x replacement padded ear cushions (BCAEC31)
    • 1x wind cap (BCAWS1)
bax-shop.uk | B-stock

Product information

Product no: 9000-0073-2552

General

Sometimes you have the need for a headset where both ears are not in use. Perhaps you want to keep one ear free for signals not coming in along the cable. In that case, you might want to check out the Shure BRH31M-NXLR4F headset 4-pin XLRF. It's obvious to think that sound quality is less important with this kind of product, but nothing could be further from the truth for this model. In fact, it does have that quality, quite a lot. The microphone arm can be rotated 270° so you can decide whether you want to wear this headset 'left' or 'right'. This model has an XLR 4-pin female connector, a format used in the broadcast world, which is therefore the primary target audience for this product.

Bax Music Warranty This product comes with a 3-year warranty.

Reviews

A review can no longer be written about this item
There are no reviews for this product yet.

Other products from Shure

Find all products of the brand Shure

Alternative products by other brands

Search all products in category Headsets with Mic
Compare your gear (1/10)
Clear Compare