Eventide Mixing Link preamplifier and effects loop

Eventide Mixing Link preamplifier and effects loop
Product no: 9000-0009-1004 Bax Music Warranty: This product comes with a 3-year warranty.

General

The Eventide Mixing Link is a high-quality microphone preamp with a built-in effects loop. It offers a wide dynamic range in preamplification with a signal-noise ratio greater than 120 dB. The built-in effects loop can accommodate both balanced and unbalanced signals, meaning you can easily hook up mixing boards and guitars alike. The aux-in supports signals from various different devices, including portable media players. During live performances, the foot switch can be used in either latch mode or momentary mode.

Eventide Mixing Link: flexible

The Mixing Link supports three different operating modes: 100% microphone with effects blended in, 50/50 balance between mic and effects, or 100% effects with no mic. Thanks to the built-in 48V phantom power you can even use the Mixing Link with a condenser microphone. Furthermore, the switchable ground lift will take care of any noise caused by grounding. Additionally, the guitar and headphone outputs have separate volume controls, and thanks to the included universal 9V adapter, you can use the Mixing Link no matter where you are in the world. Once again, Eventide ensures excellent quality with the Mixing Link mic preamp and effects loop.

Specifications

Product features

Sustainable product	not specified
Number of channels	1
Phantom power	yes
Digital output	no
Analogue audio output type	balanced line out (XLR)
Analogue audio input type	unbalanced stereo line in (TRS mini-jack), balanced line in (TRS jack), microphone input (XLR), Hi-Z instrument input (TS jack)
Headphone output	yes
Connection sockets	2x TRS send/return (balanced)
Equipped with tube	no
Energy source	battery + AC
Phase reverse	no
Built-in equaliser	no
Built-in limiter	no
Built-in compressor	no
19-inch rack size	not applicable

Weight and dimensions including packaging

Weight (incl. packaging)	500 gr
Dimensions (incl. packaging)	21,0 x 16,0 x 8,0 cm

Product specifications

high-quality microphone preamp
usuable as a DI, A/B switch, splitter or mixer
works with many different microphones, including condenser mics and ribbon mics
48V phantom power
ground lift switch
signal/noise ratio > 120 dB
effects loop
9V power supply included (also works on batteries)
dimensions: 91 x 76 x 38 mm
weight: 0.43 kg

Connectors:

Mic / Line In (XLR)
Inst In (jack)
DI / Line Out (XLR)
To FX (jack)

Write a review

Reviews from other countries

Translate all reviews into English View original reviews

G. March 20, 2023

Wrote the following about Eventide Mixing Link preamplifier and effects loop

Enkele jaren geleden gekocht om vocals te combineren met (initieel voor gitaar bedoelde) effectpedalen. Sindsdien onmisbaar.

Werkt prima. Ik gebruik hem indien mogelijk van "to amp => DI" omdat ik soms de indruk heb dat deze iets stiller is dan de DI van de ML zelf. Maar voor optredens of repetities als er geen extra (goede) DI aanwezig is, is de DI van ML ook zeker prima. Ligt misschien aan het exemplaar.

Verder ook al gebruikt voor wat homerecording als preamp ipv alleen de preamp van focusrite. Naar mijn mening is preamp van ML van opmerkelijk betere kwaliteit.

Was tijdens covid ook handig om vanop afstand met vocal coach enigszins kwalitatief vocals te mixen met karaoke backing track (gsm => aux of from FX) + direct monitoring via "Phones". Daarbij is het ook zeker aangenaam dat er geen 48V door de effectpedalen loopt :D

Misschien inderdaad wat jammer dat "From FX" mono is.

Voor mij voldoet de Mixing Link absoluut. Al veel plezier aan gehad

Jeroen D. March 14, 2016

Wrote the following about Eventide Mixing Link preamplifier and effects loop

Let op!! MONO DEVICE! FX FROM is mono en werkt dus niet met stereo effect returns. Daarmee absoluut niet het geld waard.