- Home /
- Pro Audio /
- Speaker Systems /
- Yamaha /
- Yamaha DXR12 and DXS15 active speaker set
Yamaha DXR12 and DXS15 active speaker set
Discontinued, this product can no longer be ordered.
Product no: 9000-0004-2340 Bax Music Warranty: Yamaha DXR 12 active speaker This products comes with a 3-year warranty (after online registration this product comes with a 7-year warranty). Yamaha DXS 15 active subwoofer This products comes with a 3-year warranty (after online registration this product comes with a 7-year warranty). Devine MIC100/3 XLR Microphone/Signal Cable, 3m This product comes with a manufacturing defects warranty. Devine MIC100/10 XLR Microphone/Signal Cable, 10m This product comes with a manufacturing defects warranty. Innox IVA07 35mm Distance Rod This product comes with a 3-year warranty.
General
Yamaha is known for manufacturing high-quality products for many different fields. Their DSR active speaker series was widely acknowledged as a great success, and the DXR/DXS series is its successor. This set of two 12-inch tops and two 15-inch subwoofers is simple to connect via the included cables, and the built-in 3-channel mixer always guarantees a great final mix.
DXR 12: powerful versatile speaker
After the 8 and 10-inch models comes the DXR 12. Its large 12-inch woofer gives the speaker a considerably wide frequency range of 58 Hz to 20 kHz. As such, this 12-inch model can be used without a subwoofer. The 1,100W speaker can produce a maximum sound pressure level of no fewer than 132 dB. Moreover, all speakers from the DXR series allow you to set the playback mode, depending on whether you use it with or without a subwoofer.
The DXS 15: a 15-inch powerhouse!
This 15-inch subwoofer is the largest of the DXR-DXS series, and is placed in an acoustically optimised band-pass housing. The D-class amplifier is good for up to 950 watts of power. The subwoofer has different frequency modes, and via the DX sub setting you can reach extremely low frequencies from 45Hz to 160Hz. You also have the additional choices of boosting or expanding low frequencies.
Set contents:
This set of two 12-inch tops and two 15-inch subwoofers is simple to connect via the included cables. Additionally, you get two 3-metre Procab XLR cables and two 10-meter cables for connecting to your PA mixer or mixer. To set the speakers up on top of one another, you also get two American Audio distance rods with adjustable lengths from 82 to 125 cm.
Tips or comments about this product-
Specifications
This versatile active DXR 12 speaker can easily be connected and can be used in many different setups. Due to its large 12-inch woofer this speaker has a considerably wide frequency range.
Product features
| Bluetooth | no |
|---|---|
| Mid driver/woofer diameter | 12 inches |
| Tweeter diameter | 1.5 inches |
| Suitable as monitor | no |
| Weight per speaker | 19 kg |
| Built-in equaliser | no |
| Maximum SPL | 130 dB - 139 dB |
| Maximum frequency | 20 - 20.9 kHz |
| Minimum frequency | 50 - 59 Hz |
| RMS power in watts | 500 - 749 W |
| Analogue audio input type | unbalanced line in (RCA), balanced line in (TRS jack), microphone input (XLR) |
| Analogue audio output type | thru (XLR) |
| Passive speaker output | no |
Weight and dimensions including packaging
| Weight (incl. packaging) | 22,4 kg |
|---|---|
| Dimensions (incl. packaging) | 75,0 x 44,5 x 42,5 cm |
Product specifications
- Yamaha DXR 12
- 12-inch two-way active bi-amp speaker
- low frequencies: 12-inch woofer + 2.5-inch voice coil
- high frequencies: 1.4-inch tweeter, 1-inch ferrite tweeter
- frequency range: 52 Hz - 20 kHz
- nominal coverage: 90 x 60 degrees
- with built-in DSP and HPF function
- D-contour processor: FOH-MAIN, MONITOR, OFF
- bi-amp amplifier module: 1100W (950W low, 150W high)
- crossover: FIR-X tuning (linear phase FIR filter)
- maximum SPL: 132 dB
- input 1: with XLR in and out, suited for microphone
- input 2: 6.35 mm jack
- input 3: RCA PIN
- all inputs have separate volume controls
- operating voltage: 100V - 240V, 50Hz/60Hz
- power consumption: 90 Watt
- mounting points: 10x M8
- stand adapter: 35 mm
- material: ABS
- colour: matte black
- dimensions: 362 x 601 x 350 mm
- weight: 19.3 kg
- optional accessory: UB-DXR12 U-bracket
2x Yamaha DXS 15 active subwoofer
This 15-inch subwoofer is the largest of the DXR/DXS series and is housed in an acoustically-optimised band-pass enclosure. The D-class amplifier is good for up to 950 watts of power.
Product features
| Speaker connections | XLR input, out / link / thru |
|---|---|
| Mid driver/woofer diameter | 15 inches |
| Weight per speaker | 38 kg |
| Maximum SPL | 130 dB - 139 dB |
| Maximum subwoofer frequency | 160 Hz |
| Minimum frequency | 40 - 49 Hz |
| RMS power in watts | 500 - 749 W |
| Locking speaker connectors | no |
Weight and dimensions including packaging
| Weight (incl. packaging) | 46,5 kg |
|---|---|
| Dimensions (incl. packaging) | 75,5 x 70,0 x 56,0 cm |
Product specifications
- Yamaha DXS 15
- active bi-amp subwoofer with band-pass design
- 15-inch woofer + 2.5-inch voice coil
- frequency range: 45 - 160 Hz
- dynamic power: 950W of which 600W are continuous
- maximal output: 132dB SPL
- double XLR INPUT
- double THRU XLR INPUT
- processors: D-XSUB, BOOST, XTENDED-LF, OFF
- power supply: 100V - 240V, 50Hz/60Hz
- power consumption: 120 watts
- diameter of opening for pole: 35 mm
- dimensions: 478 x 618 x 624 mm
- weight: 38 kg
- colour: matte black
2x Devine MIC100/3 XLR Microphone/Signal Cable, 3m
Fitted with robust plugs and wrapped up inside a flexible yet durable outer shell, the Devine MIC100 is the ideal cable for optimally transferring any XLR audio signal from point A to point B. This is the 3-metre model.
Product features
| (partially) coiled | no |
|---|---|
| Sustainable product | not specified |
| Right angled or straight | straight - straight |
| Colour | black |
| Length | 3.00 m |
| Podcast bundle | no |
| Set | no |
| Audio connector | 3-pin XLR |
| Accessory type | cable |
| Type of vlogging accessory | cable |
Weight and dimensions including packaging
| Weight (incl. packaging) | 100 gr |
|---|---|
| Dimensions (incl. packaging) | 20,0 x 16,5 x 2,5 cm |
Product specifications
- XLR male - XLR female
- can be used as a microphone cable or as an all-round signal cable
- supple, rugged cable
- high-grade connectors with locking option
- connectors with pull relief to retain contact integrity
- length: 3m
- filling: cotton
- oxygen-free copper
- isolation diameter: 1.4mm
- isolation colours: red and white
- number of conductors: 2
- inner conductor diameter: 0.226mm²
- conductor dimensions: 20 x 0.12mm
- helical sheathing: 0.12 x 64
- cable diameter: 6mm
- sheathing material: flexible PVC
- operating temperature: -20 - +70°C
- capacity @ 1 kHz:
- cond.-cond.: 131pF/m
- cond.-shield.: 178pF/m
2x Devine MIC100/10 XLR Microphone/Signal Cable, 10m
Close any huge XLR signal-based gap with this 10-metre microphone/signal cable from Devine! Equipped with durable plugs and wrapped up inside fully flexible and protective sheathing, the MIC100/10 ensures solid, reliable signal transfer.
Product features
| (partially) coiled | no |
|---|---|
| Sustainable product | not specified |
| Right angled or straight | straight - straight |
| Colour | black |
| Length | 10.00 m |
| Set | no |
| Audio connector | 3-pin XLR |
| Type of vlogging accessory | cable |
Weight and dimensions including packaging
| Weight (incl. packaging) | 498 gr |
|---|---|
| Dimensions (incl. packaging) | 24,0 x 24,0 x 4,0 cm |
Product specifications
- XLR male - XLR female
- can be used as a microphone cable or as an all-round signal cable
- supple, rugged cable
- high-grade connectors with locking option
- connectors with pull relief to retain contact integrity
- length: 10m
- filling: cotton
- oxygen-free copper
- isolation diameter: 1.4mm
- isolation colours: red and white
- number of conductors: 2
- inner conductor diameter: 0.226mm²
- conductor dimensions: 20 x 0.12mm
- helical sheathing: 0.12 x 64
- cable diameter: 6mm
- sheathing material: flexible PVC
- operating temperature: -20 - +70°C
- capacity @ 1 kHz:
- cond.-cond.: 131pF/m
- cond.-shield.: 178pF/m
2x Innox IVA07 35mm Distance Rod
With the reliable and height-adjustable IVA07 distance rod, you can simply and securely mount your satellite speaker on your subwoofer and find the optimal position. This distance rod has ben finished with a 35mm mounting point at both ends.
Product features
| Speaker pole mount | 35 mm |
|---|---|
| Distance rod weight capacity | 20 -29 kg |
| Sustainable product | not specified |
| Height adjustable | yes |
| Maximum height of stand | 140 to 150 cm |
| Set | no |
Weight and dimensions including packaging
| Weight (incl. packaging) | 1,5 kg |
|---|---|
| Dimensions (incl. packaging) | 84,0 x 9,5 x 9,0 cm |
Product specifications
- Innox distance rod
- for mounting a satellite speaker onto a subwoofer
- fitted with a 35mm screw thread at both ends
- strong tightening knob
- safety pin can be secured at multiple points
- height adjustable: 94cm to 147cm
- weight: 1.5kg
- max.load: 25kg
- colour: black
- construction: steel
Wrote the following about Devine MIC100/10 XLR Microphone/Signal Cable, 10m
Thanks to bax music
Wrote the following about Devine MIC100/3 XLR Microphone/Signal Cable, 3m
Wrote the following about Devine MIC100/3 XLR Microphone/Signal Cable, 3m
Wrote the following about Devine MIC100/10 XLR Microphone/Signal Cable, 10m
Wrote the following about Innox IVA07 35mm Distance Rod
Wrote the following about Devine MIC100/3 XLR Microphone/Signal Cable, 3m
Reviews from other countries
Translate all reviews into English View original reviews
Wrote the following about Devine MIC100/3 XLR Microphone/Signal Cable, 3m
Wrote the following about Devine MIC100/3 XLR Microphone/Signal Cable, 3m
Wrote the following about Innox IVA07 35mm Distance Rod
Wrote the following about Devine MIC100/10 XLR Microphone/Signal Cable, 10m
| Description | Type | Language | Extension |
|---|---|---|---|
| Devine MIC100/3 Declaration of Conformity | Manual | Unknown | |
| Devine MIC100/10 Declaration of Conformity | Manual | Unknown |