The Gravity SA FIXTILT 5 is a robust adapter that allows you to adjust your top speaker at an angle of up to 5 degrees for better dispersion! The FIXTILT can be adjusted both 5 degrees upwards and downwards.
The Gravity XSP 1371 adjustment screw is part of the wind-up mechanism of the Gravity SP 4722 speaker stand as well as that of various similar stands. This replacement part comes fitted with a green ring.
The Gravity SSP WB SET 1 W is a speaker stand with a round base. The tripod consists of the Gravity WB 123 B W tripod base, the Gravity WB 123 WPB W weight plate and the Gravity SP 2342 B W intermediate pole.
The Gravity XSP 1001 is a spare part for Gravity microphone stands. The XSP 1001 is a microphone clamp and boom holder with a diameter of 16 millimetres.
The Gravity XSP 1003 quick-lock allows you to swiftly adjust the boom arm length of a Gravity microphone stand.
The Gravity XSP 1004S is a spare part for Gravity microphone stands equipped with a tripod base. With this tripod base kit, you can replace a damaged tripod at an economical price!
The Gravity XSP 1005 is a set of 3 tripod leg mounts. These are spare parts for Gravity microphone stands equipped with a tripod base.
The Gravity XSP 1010 replacement boom arm counterweight is compatible with various Gravity-designed boom arm microphone stands.
The Gravity XSP 1011 is a single rubber foot fitted with a replaceable green coloured ring. This is a spare part for Gravity microphone stands equipped with a tripod base.
The Gravity XSP 1013S is a spare part for Gravity swing-arm microphone stands. It is a 1-point adjustable hub into which a swivel arm can be attached.
Compatible with any Gravity microphone stand fitted with a boom arm, the replacement Gravity XSP 1014S Swivel Arm Hub has a two-point adjustment system so both the angle and length of the boom arm can be accurately set up.
The Gravity XSP 1015 replaces the worn or broken collar of your Gravity speaker tripod. This collar concerns the coupling piece between the tripod's legs and the tripod.
The Gravity XSP 1017S is a spare part for a Gravity speaker stand, specifically a speaker leg brace set complete with bolt, nut and washer so you can easily replace a broken support.
With the Gravity XSP 1018, you have a spare part for Gravity speaker stands. The XSP 1080 concerns a plug that allows you to cover the tube of the stand.
If the rubber base of a Gravity speaker stand is worn out or lost, you can replace it with the Gravity XSP 1020. This foot features a coloured ring.
The Gravity XSP 1021 is a spare part for Gravity speaker stands. This is a rubber ring that you can attach around the tube of the stand and which holds the safety pin.
The Gravity XSP 1024 is a set of 4 plugs that allow you to plug shut the support tubes of a Gravity keyboard stand. The XSP 1024 is compatible with 28-millimetre diameter tubes.
If your Gravity keyboard stand's rubber feet are worn out or lost, you can replace them with this Gravity XSP 1026 rubber foot. This is a single foot only.
With the Gravity XSP 1035, you have an M8 set screw that serves as a spare part for Gravity speaker stand adapters. The knob on the set screw is fitted with a green coloured ring.
The Gravity XSP 1037S is a spare part for Gravity speaker stands equipped with a tripod.
The Gravity XSP 1038 is a spare part for Gravity microphone stands with a round base. This base has a diameter of 27 centimetres and a weight of 3.6 kilograms.
The Gravity XSP 1042 is a set of rubber washers that serve as a spare part for Gravity microphone stands with a 1-point rod arm system.
The Gravity XSP 1043 is a set of rubber washers that serve as a spare part for Gravity microphone stands with a 2-point rod arm system.
The Gravity XSP 1045 base plate end cap is a spare part for Gravity monitor stands.
The Gravity XSP 1046 is a threaded adapter that serves as a spare part for Gravity monitor stands.
The Gravity XSP 1047 is a screw set consisting of 4 screws that you use to secure the top plate of the Gravity SP 3202 studio monitor stand, among others. This is a spare part.
The Gravity XSP 1048 S upper clamp set is a spare part for Gravity speaker stands. This set comes with a set screw that features a green coloured ring.
The Gravity XSP 1049 is a set of two supports including screws. This is a set of spare parts for Gravity tripod speaker stands.
The Gravity XSP 1050 speaker stand base refers to a spare part for Gravity tripod speaker stands, such as the Gravity SP 5522 B.
The Gravity XSP 1051 is a cap set for the lower end of the main tube of a Gravity speaker stand, including screws and nuts for the tripod tubes. This is a spare part.
The Gravity XSP 1052 is a set consisting of two plastic plugs suitable for the guitar mounts on Gravity guitar stands, such as the Gravity Solo-G. This is a spare part for these stands.
The Gravity XSP 1053 is a spare part for Gravity guitar stands, such as the Gravity Solo-G. This is a rubber cap with pin, suitable for the main hinge on the guitar stand.
The Gravity XSP 1054 is a set of two protective, foam sleeves that allow you to protect the supports for a Gravity VARI-G guitar rack from bumps and scratches. This is a set of spare parts.
With the Gravity XSP 1055, you are provided with a set of spare parts suitable for Gravity VARI-G guitar racks. This is a set of long, protective foam sleeves for the brackets.
The Gravity XSP 1056 refers to a set of screws that you can use to assemble a Gravity VARI-G guitar rack. This is a set of spare parts consisting of screws and washers.
The Gravity XSP 1061 is a set of optional spikes that you can attach to the underside of a Gravity monitor stand, such as the Gravity SP 3202. This prevents the tripod from sliding on slippery surfaces.
The Gravity XSP 1201 is a screw set that serves as a spare part of a Gravity NS ORC music stand. With this kit, you attach the blade mounting plates to the tripod.
The Gravity XSP 1358 is a set of two protective tubes for Gravity guitar stands, especially the GS 01 and similar models. You attach these tubes to the legs on which the guitar leans.
From the Gravity GS 01 NHB, this XSP-1360 spare part concerns the guitar clamp for the guitar stand.
The Gravity XSP 1362 is a spare part for the wind-up Gravity speaker stand. It is the 35 mm adapter sleeve on which you mount the speaker.
Use the Gravity XSP 1363 to replace a lost or worn rubber base on your Gravity speaker stand, such as the Gravity SP 4722. This is a rubber base including a green coloured ring.
The Gravity XSP 1364 is a set of two bracket rods including screws. This set serves as a spare part for Gravity tripod speaker stands such as the SP 4722.
The Gravity XSP 1365 is a set consisting of three screws, nuts and washers for mounting the Gravity speaker stand base. This is a spare part for the Gravity SP 4722, among others.
The Gravity XSP 1366 speaker stand base is a spare part for Gravity tripod speaker stands, such as the SP 4722. This is the base part, excluding screws and legs.
If the handle of your Gravity SP 4722 or similar speaker stand is damaged, you can replace it with this Gravity XSP 1368 spare part.
If the safety pin of the Gravity SP 4722 is damaged or lost, replace it with the Gravity XSP 1369! This pin features a cord that allows you to attach the pin to the set screw.
With the Gravity XSP 1370, you have the wind-up mechanism complete with housing, suitable for Gravity SP 4722 or similar speaker stands. This is a spare part.
The Gravity XSP 1372 concerns the central connecting ring for the tripod bracket rods for the Gravity SP 4722 and similar speaker stands. This is a spare part and does not include a screw set.
Filters