The Gravity XSP 1031 Replacement Tensioning Screw is needed to mount the height adjustment lever of your Gravity MS 4321 microphone stand. Also compatible with similar Gravity mic stands.
The Gravity XSP 1044 is a plastic inlay that serves as a spare part for the microphone clutch of the Gravity MS 4321 and similar microphone stands.
The Gravity XSP 1058 is a set screw including plastic tip, suitable for Gravity headphone holders or microphone stand adapters. The knob on the screw is fitted with a green, replaceable washer.
The Gravity XSP 1059 is a spare part for the Gravity MS TM 1 table clamp. It is a long set screw fitted with a wide plastic tip to protect smooth surfaces.
The Gravity XSP 1063 is a rubber pad that serves as a spare part for the Gravity MS AMP DS 01. This rubber spacer results in acoustic decoupling.
With the Gravity XSP 1064, you have a set consisting of a single screw and washer. This is a set of spare parts for a Gravity SAT 36 or similar T-Bar for speaker stands.
With the Gravity XSP 1065, you are provided with a spare part for the Gravity SAT 36 B. This is a cap that allows you to cover the horizontal tube.
The Gravity XSP 1069 is an M6 x 8.3 mm set screw with a sharp point, suitable as a spare part for the Gravity MS QT 1 microphone adapter.
The Gravity XSP 1071 concerns the locking mechanism for the Gravity LS Vari-Pole. It is a spare part for this tripod.
The Gravity XSP 1072 concerns the base of a Gravity Vari-Poly tripod. It is a spare part. The foot has a diameter of 85 millimetres.
The Gravity XSP 1073 is a TPE wing nut that serves as a spare part of the Gravity MA TRAY microphone stand accessory. The nut is supplied with a long screw.
For the Gravity MA TRAY microphone stand accessory, the Gravity XSP 1074 is a spare part. This is a wing nut including a short screw.
The Gravity XSP 1075 is a spare part for the Gravity LS 331 B light stand. It is a sturdy steel base weighing 14 kilograms.
The Gravity XSP 1004S is a spare part for Gravity microphone stands equipped with a tripod base. With this tripod base kit, you can replace a damaged tripod at an economical price!
The Gravity XSP 1014S 2-point boom arm hub is a spare part for Gravity microphone stands equipped with a boom arm. Combined with two set screws, it allows you to adjust the boom arm's angle and length.
The Gravity XSP 1016S clamp set is a spare part for Gravity speaker stands. This clamp set allows you to adjust the height of your stand.
The Gravity XSP 1017S is a spare part for a Gravity speaker stand, specifically a speaker leg brace set complete with bolt, nut and washer so you can easily replace a broken support.
With the Gravity XSP 1027S, you have a complete kit consisting of spare parts that allow you to adjust the height of a Gravity keyboard stand.
The Gravity XSP 1038 is a spare part for Gravity microphone stands with a round base. This base has a diameter of 27 centimetres and a weight of 3.6 kilograms.
The Gravity XSP 1092 is a set of 12 rubber anti-slip stoppers that serve as spare parts for the Gravity LTS 01 laptop stand.
The Gravity XSP 1094 spare part consists of two rubber feet for the Gravity LTS 01 laptop stand. These feet fit on the ends of the stand and prevent the stand from shifting.
The Gravity XSP 1095 provides you with the lever element, including screws, for the Gravity LTS 01 laptop stand. This is a spare part that appears twice in the LTS 01 main product.
The Gravity XSP 10014 is a set of four rubber holders that allow you to put the weight plate for the Gravity WB 123 base plate in place. These are four spare parts.
The Gravity XSP 10006 is a short set screw that serves as a spare part for, among others, the Gravity LS TBTV 17 light stand. This set screw has a rubber anti-slip coating.
The Gravity XSP 1084 Spare Screw Pack includes four replacement screws, washers and wing nuts that are compatible with Gravity T-Bars like the LS TBTV 17.
The Gravity XSP 10007 is a spare part for the Gravity LS TBTV 17 light stand. It is the upper clamping element of the tripod, complete with screws, set screw and washer.
For the Gravity LS TBTV 28 light stand, the Gravity XSP 10011 is a spare part. This is the complete, upper clamp set including set screw, screws, washer and safety pin.
The Gravity XSP 10012 provides you with the lower clamp set for the Gravity LS TBTV 28 tripod. This clamp set serves as a spare parts set and consists of a clamp, set screw, screws, washer and safety pin.
The Gravity XSP 1082 T-Bar is a spare part for the Gravity LS TBTV 17 light stand. This T-Bar has a length of 95 centimetres and is made of sturdy steel.
The Gravity XSP 1083 T-Bar is a spare part for the Gravity LS TBTV 28 light stand. This T-Bar has a length of 122 centimetres and is made of sturdy steel.
The Gravity XSP 1090 is a set of end caps and screws for the Gravity LTS 01 laptop stand. These are two plastic caps against which the laptop leans, including screws for fastening.
The Gravity XSP 1091 provides you with the metal tray that fits the Gravity LTS 01 laptop stand. This is a spare part; the tray comes standard with the main product.
The Gravity XSP 10015 replacement feet are compatible with the Gravity WB 431 baseplate. This is a set of 4.
The Gravity XSP 10001 is a spare part for Gravity microphone stands. It is the main bushing including clutch for the MS 231 and similar models.
The Gravity XSP 10013 is a short set screw that serves as a spare part of the Gravity NS 411 and similar classical music stands. This set screw has M6 x 17 mm threads and a comfortable knob.
The Gravity XSP 1080 refers to a set of spare parts that make up the support joint that couples the music sheet to the stand. This set comes complete with set screws, washers and other parts.
With the Gravity XSP 1081, you are provided with a clamp that serves as a spare for the Gravity NS 411 sheet music stand, or for the Gravity LS TBTV 17 light stand.
The Gravity WB 431 B is a base plate onto which you can mount up to 3 M20 tripods or intermediate poles. This is a wide, steel, stable mounting plate with a low profile and fabric-covered legs.
The Gravity XSP 10008 provides you with a tripod base kit for attaching tripod parts to the main tube of the Gravity LS TBTV light stand.
The Gravity XSP 10009 is a medium adjustment screw suitable for the tripod base kit of the Gravity LS TBTV 17 light stand. This is a spare part supplied as standard with the main product.
The Gravity XSP 1078 is a set of two end caps you can use to seal the ends of the Gravity LS TB 01 universal T-Bar. These caps come with green rings included.
The Gravity XSP 1079 is a clamp that allows you to mount the Gravity LS TB 01 T-Bar to a standard 35 mm wide speaker stand. This is a spare part that comes standard with the main product.
The Gravity GTLSP431 is a strong touring spacer rod with automatic LockPin® locking. Suitable for the GTLS431B, GLS431B and GLS331B with a maximum height of 2.4 metres.
The Gravity XSP 1002 is a spare part for Gravity microphone stands. The XSP 1002 is a microphone clamp and boom holder with a diameter of 12 millimetres.
The Gravity XSP 1023S spare hardware pack includes the bolts, nuts and washers needed to secure a Gravity speaker stand.
The Gravity XSP 1018L is a longer version of the XSP 1018: a cover/plug that serves as a spare part of Gravity speaker stands. It allows you to cover the tube of the stand.
The Gravity XSP 1019 is a spare part for Gravity speaker stand adapters, such as the SA FIXTILT 5. It is a plug/cover that you can place on the tube of the adapter.
Filters