Stand Parts

Gravity WB 123 SET 1 B M20 Pedal Footplate, Weights Included

The Gravity WB 123 SET 1 B provides you with a sturdy, weighted base plate onto which you can mount M20-male hardware. Think, for example, of intermediate poles or tripod accessories for speakers and microphones!

Primacoustic Kickstand kick drum microphone isolation

A kick drum can cause quite a lot of vibration and resonances, and you obviously don't want these on your recordings. The Primacoustic Kickstand provides good isolation and helps reduce resonances.

Gravity RP 5555 universal ring pack, light blue

The Gravity RP 5555 is a universal ring pack for all Gravity customisable products. Each set contains 20 rings in 4 different sizes (15 mm, 20 mm, 25 mm, 30 mm). This is the light blue variant.

Gravity RP 5555 Universal Ring Pack (Orange)

Neatly colour-code any Gravity stand, instrument rack or accessory with the Gravity RP 5555 Universal Ring Pack. This set of twenty rings comes in four different sizes: 15mm, 20mm, 25mm, and 30mm.

Gravity RP 5555 universal ring pack, yellow

The Gravity RP 5555 is a universal ring pack for all Gravity customisable products. Each set contains 20 rings in 4 different sizes (15 mm, 20 mm, 25 mm, 30 mm). This is the yellow variant.

Gravity KS LTS 2 T Keyboard Stand Add-On

Gravity launches a handy add-on for keyboard stands with this KS LTS 2 T. The steel platform serves to place a second keyboard or synth above or below the already existing one. A practical extension.

Gravity MS W 22 Adjustable Boom Arm

The Gravity MS W 22 is an adjustable rod arm, made of robust steel and finished with a white powder coating. This rod arm is adjustable in length and angle up to a maximum length of 88 centimetres.

Gravity LS M20 KEY Wrench for LS 331/431 Stand

To mount weights on the LS 431 or LS 331 tripod, use the Gravity LS M20 KEY spanner. You can also use this spanner to tighten the feet.

IsoAcoustics V120 Wall Bracket for mounting on the wall

Combine the IsoAcoustics V120 Wall Bracket with the IsoAcoustics V120 Mount (not included) and secure your studio monitor via one of three threaded rigging points to ensure optimum projection.

IsoAcoustics V120 Truss Clamp 2 for 2" Truss Tube Mounting

With this sturdy truss clamp, you can attach the IsoAcoustics V120 Mount to a truss tube with a diameter of 50 millimetres (2 inches). This allows you to mount your studio monitor to your truss system.

IsoAcoustics V120 T-Adapter for Securing a Monitor to V120 Mount with L/C Bracket

To mount your studio monitor on an L-Bracket or C-Bracket of the V120 system, you can use this adapter. Suitable for speakers with horizontal mounting points that are 6.8 - 7.62 cm apart.

IsoAcoustics V120 107x50 Adapter for Securing a Monitor to V120 Mount with L/C Bracket

To mount a studio monitor with four mounting points that are 10.79 cm apart horizontally and 5.08 cm apart vertically, choose the IsoAcoustics V120 107x50 Adapter.

Gravity GXSP10129 HOLDER FOR GWB123B WEIGHT PLATES Holder for weight discs

The Gravity GXSP10129 is a robust holder for the GWB123B weight discs, designed for extra stability of speaker stands with round bases. Includes fixed mounting with screws.

Gravity KS VARI-FOOT 1 Adjustable Foot for Keyboard Stand

With a set of Gravity KS Varifoot's attached to your (Gravity) keyboard stand, you prevent the stand from wobbling on uneven surfaces. Each Varifoot is suitable for 28 mm thick tubes and compensates up to a centimetre in height.

Pearl PJ-83L pipe joint 830 series

Stay Music Straight Arms 450mm Tower/Piano Model Expansion Kit

This pair of 450mm support arms are compatible with Stay Music's Tower and Piano model stands and come fitted with rubber pads for optimal grip.

Stay Music Straight Arms 380mm Kit for Tower Model

This Stay Music expansion kit includes a pair of straight arms that can be fitted to an existing Tower Model stand to create a mid-level platform for an extra 76-note keyboard.

Stay Music Sheet Music Stand for Tower/Piano Stand

Complete your Stay Music Tower or Piano Model stand with this simplistic yet essential, easy-to-mount music rest.

Sennheiser MZFS 8000 Floor Stand with Damping Ring for MKH 8000

Sennheiser's MZFS 8000 is a robust floor stand and is suitable for Sennheiser's MKH 8000 series. This stand is impervious to contact noise and vibration thanks to its damping ring.

Sennheiser MZG 8000 Hinge with MKH Microphone Connection

Sennheiser's MZG 8000 is an articulated coupler that you can use in combination with the MZS 31 shockmount to mount an MKH series microphone on a desk. It also transmits the audio signal.

Sennheiser EW-DX TS 3-PIN S2-10 Gooseneck Microphone Base (614.2 - 693.8 MHz)

The Sennheiser EW-DX TS Wireless Base Station is compatible with all gooseneck microphones with a standard 3-pin XLR connection and no LED ring.

Gibraltar Hardware 77SSTD workstation elliptical leg Base 2-tier stand w 18" tube

Portable Gibraltar 77SSTD workstation base stand with elliptical tripod legs, 2-stage height adjustment (61-97 cm) and 5/8" thread for accessories.

Manhasset 1400 wind instrument stand adapter

Manhasset unpacks a clever modular system to make the best use of stage space. You can attach this 1400 base element to your Manhasset 48-series sheet music stand.

Manhasset 1470 Oboe Peg stand for oboe

The Manhasset 1470 Oboe Peg is fully compatible with the Manhasset 1400 wind instrument stand. Slot it on to complete a neat and secure oboe stand.