Devine Onyx 2.2. Passive DJ Speakers with Bluetooth

4.7 / 5

Specifications

2x Devine Onyx 15S 15-Inch Passive Subwoofer

Devine's Onyx 15 passive subwoofer is the perfect match for your passive full-range speakers. Built for booming bass, it offers an impressive 600 Watts of RMS power and can handle peaks of up to 2,400 Watts.

Product features

6.3mm TRS connector: No
Mid driver/woofer diameter: 15 inches
Wire terminals: No
Sustainable product: Not specified
Sensitivity: Not specified
Weight per speaker: 38 kg
Speaker cabinet material: Wood
Maximum SPL: 130 dB - 139 dB
Maximum subwoofer frequency: 150 Hz
Minimum frequency: 30 - 34 Hz
Nominal impedance: 8 ohms
Peak power in watts: 1,500 - 3,000 watts
RMS capacity in watts: 500 - 749 W
Speaker connection: Locking speaker
Locking speaker connectors: Yes

Weight and dimensions including packaging

Weight: 38,7 kg
Dimensions: 73,0 x 66,0 x 55,0 cm

Product specifications

Devine Onyx 15S
passive subwoofer
woofer: 15"
voice coil: 4"
peak power: 2400W
RMS: 600W
frequency range: 35 Hz - 150 kHz
impedance: 8 Ohms
max. SPL: 126 dB
wheels: optional
dimensions: 530 x 700 x 625mm
weight: 32 kg

1x Devine MX-2000 2-Channel PA Power Amplifier (2x 1000W at 8 Ohms)

If masses of power is what you need, then the Devine MX-2000 is what you'll want. This forceful power amplifier delivers a 2x 1000W output at 8 Ohms and even kicks things up to 2x 1350W at 4 Ohms.

Product features

19-inch rack size: 2U
2-ohm compatible: No
Number of amplifier channels: 2
Audio loop output: No
Bridge mode: Yes
Sustainable product: Not specified
Input: RCA, RCA + XLR, XLR
Built-in filter: None
Built-in protection: Overload, thermal, short circuit, square wave / DC voltage, peak limiter, clip indicator
Built-in DSP processor: No
Cooling: Ventilator
RMS power (4 ohms) per channel: 1300 - 1399 watts
RMS power (at 8 Ohms) per channel: 1000 - 1099 Watts
Amplifier class: H
Amplifier output: Locking speaker connector, wire clamps
Equipped with crossover: No

Weight and dimensions including packaging

Weight: 16,6 kg
Dimensions: 53,5 x 49,0 x 14,0 cm

Product specifications

Devine power amplifier
series: MX
clean control panel with front ventilation panel
temperature-controlled fan cooling system with front-to-back cooling
magnetically suspended fans for increased lifespan and reduced noise
various models available to meet different demands in terms of power capacity and functions
19-inch rack compatibility (2U)
soft start (avoids power spikes, especially when switching on multiple amplifiers at once)
equipped with protection circuits and systems (clip limiter, DC output protection, power surge protection, etc)
front panel LED status indicators
supports standard stereo and bridge set-ups
adjustable signal input (stereo/parallel/bridge)
various professional inputs and outputs for optimum audio and eased installation
high-quality circuits and components for optimum power generation
power (RMS):
- 2x 1000W at 8 Ohms
- 2x 1350W at 4 Ohms
- bridged at 8 Ohm: 1x 2000W
class: H
frequency response: 20Hz - 20kHz
input sensitivity: 1.4V / 0.775V
input impedance: 20 kOhm / 10 kOhm
damping factor: >200
S/N ratio: >100 dB
power supply: 220 - 240V AC, 50/60 Hz
connections:
- inputs: XLR (balanced), RCA (unbalanced)
- speaker outputs: 2x speakON + wire terminals
- bridged outputs: 1x wire terminal
Ground Lift function
dimensions (W x D x H): 48.2 x 37 x 8.8cm (2 U/HE)
weight: 17.5 kg

4x Devine SPE25/10 10-Metre Speaker Cable, 2x2.5mm

This solid Devine SPE25 Series speaker cable offers an excellent price/quality ratio. Thanks to two 2.5mm² conductors and two locking speaker connectors, it's able to guarantee high-quality signal transmission.

Product features

Sustainable product: Not specified
Length: 10.00 m
Male/female: Female - female
Audio connector: Lockable speaker connector 4p
Number of cores: 2
Conductor diameter: 2.5 mm2

Weight and dimensions including packaging

Weight: 1,2 kg
Dimensions: 39,0 x 15,0 x 4,5 cm

Product specifications

speaker cable
connector 1: locking speaker connector (4SPP)
connector 2: locking speaker connector (4SPP)
high signal quality
cable type: 2x 2.5mm²
suited for a power of up to 2,000 W (PA)
length: 10m
colour: black

2x Devine Onyx 12 12-Inch Passive Speaker

The Devine Onyx 12 delivers 300 Watts of RMS power through its 12-inch woofer and 1.35-inch horn-loaded, compression driver. While capable of holding its own, this passive speaker can be hooked up to an external amplifier for some extra sonic thrust.

Product features

Sustainable product: Not specified
Speaker connection: Locking speaker
Nominal impedance: 8 ohms
RMS capacity in watts: 200 - 349 W
Peak power in watts: 1,000 - 1,249 watts
Mid driver/woofer diameter: 12 inches
Tweeter diameter: 1.35 inches
Weight per speaker: 13 kg
Maximum SPL: 110 dB - 119 dB
Minimum frequency: 50 - 59 Hz
Maximum frequency: 19 - 19.9 kHz
Sensitivity: Not specified
Set: No
Installation speaker / 100 V: No
Speaker cabinet material: Plastic

Weight and dimensions including packaging

Weight: 15,4 kg
Dimensions: 68,0 x 43,5 x 43,0 cm

Product specifications

Devine Onyx 12
passive speaker
technical information:
- woofer: 12"
- tweeter: 1.35" compression driver, horn-loaded
- sound dispersion: 90 x 60 degrees
- output capacity: 300 W (RMS), 1200 W (peak)
- frequency range: 53 Hz to 19 kHz
- crossover frequency: 2.8 kHz
- impedance: 8 Ohms
- max. SPL: 119 dB
connectors: 2x lockable speaker connection (4P)
housing
- material: plastic
- grille: metal with acoustic foam
- rubber feet
- 2x recessed handles
- pole mount: 35mm
- dimensions: 358 x 356 x 613mm
- weight: 13.5 kg

1x Devine MX-800 2-Channel PA Power Amplifier, 2x 400W at 8 Ohms

Designed to power passive speakers, the hefty Devine MX-800 PA two-channel power amplifier supplies 400 Watts per channel at 8 Ohms or 600 Watts per channel at 4 Ohms.

Product features

19-inch rack size: 2U
2-ohm compatible: No
Number of amplifier channels: 2
Audio loop output: No
Bridge mode: Yes
Sustainable product: Not specified
Input: Jack (6.3 mm), jack (6.3 mm) + XLR, XLR
Built-in filter: None
Built-in protection: Overload, thermal, short circuit, square wave / DC voltage, peak limiter, clip indicator
Built-in DSP processor: No
Cooling: Ventilator
RMS power (4 ohms) per channel: 600 - 699 watts
RMS power (at 8 Ohms) per channel: 400 - 449 Watts
Amplifier class: AB
Amplifier output: Locking speaker connector, wire clamps
Equipped with crossover: No

Weight and dimensions including packaging

Weight: 12,2 kg
Dimensions: 52,0 x 40,5 x 14,0 cm

Product specifications

power (RMS):
- 2x 400W at 8 Ohms
- 2x 600W at 4 Ohms
- bridged at 8 Ohm: 1x 800W
Class AB
frequency response: 20Hz - 20kHz
input sensitivity: 1.4V / 32dB / 1.0V
input impedance: 20 kOhm / 10 kOhm
damping factor: >350
S/N ratio: >95dB
power supply: 220 - 240V AC, 50/60 Hz
connections:
- inputs: XLR/TRS (balanced)
- speaker outputs: 2x speakON + wire terminals
- bridged outputs: 1x speakON, optional
Ground Lift function
dimensions (W x D x H): 48.2 x 32.1 x 8.8cm (2 U/HE)
weight: 11.5 kg

2x Innox IVA07 M20 M20 Distance Rod

The Innox IVA07 M20 distance rod is designed to suspend a full-range speaker in the optimum position. Height adjustable, this rod is compatible with a speaker or subwoofer of any size.

Product features

Sustainable product: Not specified
Speaker pole mount: M20 screw thread
Height adjustable: Yes
Distance rod weight capacity: 20 -29 kg
Set: No
Maximum height of stand: 140 to 150 cm

Weight and dimensions including packaging

Weight: 1,7 kg
Dimensions: 76,0 x 9,0 x 9,0 cm

Product specifications

distance rod
material: steel
max. load capacity: 50kg
screwthread: M20
top side: 35mm tube
height: 800 - 1340mm (adjustable)
equipped with safety pin and knob for securing speakers
material: steel
colour: black
interior dimensions: 9 x 9 x 83cm
weight: 2kg

1x Omnitronic XO-230 Active Crossover (2-Way Stereo/3-Way Mono)

Demand full control over the sound? Add the Omnitronic XO-230 stereo crossover to your set-up and efficiently route the frequencies to counter any bottlenecks.

Product features

Stereo crossover: Two-way
Subwoofer output: Yes
Sustainable product: Not specified
Built-in limiter: No
Built-in compressor: No
Mono crossover: Three-way
Output connector: XLR (3-pin)
Input: XLR

Weight and dimensions including packaging

Weight: 2,4 kg
Dimensions: 53,0 x 25,0 x 10,0 cm

Product specifications

active crossover (2-way stereo/3-way mono)
power consumption: 8 W
crossover frequency: 45 - 9,600 Hz, 24 dB/oct, Linkwitz-Riley filters
filter: low cut: 40 Hz 12 dB/oct Butterworth
phase reverse switch
crosstalk: > 80dB
controls: mode switch (2-way stereo / 3-way mono)
connections:
- inputs: line via 2x 3-pin XLR
- outputs: line via 4x 3-pin XLR
dimensions: 48.3 x 15.2 x 4.45cm
weight: 1.87 kg
included:
- user manual
- power cable

1x Vonyx STM3030 4-Channel Mixer with USB and Bluetooth

Want to make a start as a DJ? Grab the Vonyx STM3030 4-channel mixer and get the option to load up MP3s via USB, SD and Bluetooth.

Product features

Number of auxiliaries: 0
Number of link channels: 3
Number of microphone channels: 1
Number of submasters: None
Compressor on the inputs: No
Crossfader: Yes
Audio ducking: Yes
Sustainable product: Not specified
Equalizer: None
Fader start support: No
Headphone output: Yes
Input: Jack (6.3 mm), RCA
Built-in audio player: USB, SD(HC), Bluetooth
Built-in effects: No
Input level meters: No
Level meters on the outputs: LED VU meter
Rack height: 3 U
Output connector: RCA
Volume control: Faders + knobs

Weight and dimensions including packaging

Weight: 1,0 kg
Dimensions: 30,0 x 20,0 x 10,0 cm

Product specifications

Vonyx STM3030
4-channel mixer
backlit controls
MP3 (SD or USB) player with display
Bluetooth
WAV record-function
channels:
2x switchable line/phono channels
1x switchable MP3/line channel
2x microphone channels
Monitor and Cue function per channel
Talkover function
Crossfader
frequency range: 20 Hz - 20,000 kHz
THD: <0.02%
microphone input level: 1mV, 1 kOhm
input level: phono 3mV, 50kOhm
input level: line 150mV, 100kOhm
mic signal-to-noise ratio: > 70 dB
phono signal-noise ratio: > 70dB
line signal-to-noise ratio: > 80 dB
output level: master 1.5V
headphone output level: 200mW
power: 220-240VAC 50 / 60Hz (12V power supply)
dimensions: 132 x 267 x 55mm
weight: 1.3 kg
included:
- power adapter

1x Skytec DJ Accessory Kit MK II bundle

The Skytec DJ Accessory Kit MKII is an attractive set for starting DJs. The microphone, headphones, RCA cables and speaker cable are a complete addition to a mixer, tabletop, amplifier and speakers, for instance.

Product features

On/Off Switch: Yes
Connection type: XLR 3p
Studio bundle components: Microphone, headphone
Rotatable earpad: No
Sustainable product: Not specified
Microphone sensitivity (dBV/PA): Not applicable
Microphone weight: 250-299 grams
Headphone construction: Closed
Microphone impedance: 600-649 ohms
In/on/over ear: Over-ear
Includes microphone: No
Foldable / detachable: No
Removable cable: No
Cable length: 200-249 cm
Maximum SPL: Not applicable
Maximum frequency: 10 - 10.9 kHz
Microphone accessories: Cable, bag / box, headphone
Microphone set: No
Minimum frequency: 100 - 149 Hz
Polar pattern: Cardioid
Audio connector: 3-pin XLR
Microphone type: Dynamic
Headphone design: Modern
Volume control: No
Setup type: Handheld microphone

Weight and dimensions including packaging

Weight: 1,4 kg
Dimensions: 21,0 x 21,0 x 9,0 cm

Product specifications

accessory set for DJs
headphones with 3.5mm jack
metal microphone with 4m cable and 6.3mm jack
speaker cable 0.7 mm² (10 m)
stereo RCA-RCA cable (2.5 m)
stereo RCA cable to stereo 3.5mm jack

1x Stagg STC3CMXM x2 Male XLR - x2 Male RCA Extenstion Cable, 3m

The Stagg STC3CMXM twin-cable is fitted with two male XLR plugs at one end and two male RCA tulip-plugs at the other end. Each side is thoughtfully finished with stereo red-and-black colour coding.

Product features

Sustainable product: Not specified
XLR plug type: 2 x XLR 3p male
RCA plug type: 2 x RCA male
Length: 3.00 m

Weight and dimensions including packaging

Weight: 225 gr
Dimensions: 24,0 x 8,5 x 3,0 cm

Product specifications

Stagg STC3CMXM
extension cable with high-quality connectors
cable length: 3m
plugs: x2 male XLR to x2 Male RCA
plugs finished with stereo colour coding
colour: black

4x Devine MIC100/1.5 XLR Microphone/Signal Cable, 1.5m

Fitted with robust plugs and wrapped up inside a flexible yet durable outer shell, the Devine MIC100 is the ideal cable for optimally transferring any XLR audio signal from point A to point B. This is the 1.5-metre model.

Product features

Sustainable product: Not specified
Audio connector: 3-pin XLR
Length: 1.50 m
Colour: Black
Set: No
(partially) coiled: No
Right angled or straight: Straight - straight

Weight and dimensions including packaging

Weight: 100 gr
Dimensions: 15,0 x 15,0 x 3,0 cm

Product specifications

XLR male - XLR female
can be used as a microphone cable or as an all-round signal cable
supple, rugged cable
high-grade connectors with locking option
connectors with pull relief to retain contact integrity
length: 1.5m
filling: cotton
oxygen-free copper
isolation diameter: 1.4mm
isolation colours: red and white
number of conductors: 2
inner conductor diameter: 0.226mm²
conductor dimensions: 20 x 0.12mm
helical sheathing: 0.12 x 64
cable diameter: 6mm
sheathing material: flexible PVC
operating temperature: -20 - +70°C
capacity @ 1 kHz:
- cond.-cond.: 131pF/m
- cond.-shield.: 178pF/m

Specifications

2x Devine Onyx 15S 15-Inch Passive Subwoofer

Product features

6.3mm TRS connector: No
Mid driver/woofer diameter: 15 inches
Wire terminals: No
Sustainable product: Not specified
Sensitivity: Not specified
Weight per speaker: 38 kg
Speaker cabinet material: Wood
Maximum SPL: 130 dB - 139 dB
Maximum subwoofer frequency: 150 Hz
Minimum frequency: 30 - 34 Hz
Nominal impedance: 8 ohms
Peak power in watts: 1,500 - 3,000 watts
RMS capacity in watts: 500 - 749 W
Speaker connection: Locking speaker
Locking speaker connectors: Yes

Weight and dimensions including packaging

Weight: 38,7 kg
Dimensions: 73,0 x 66,0 x 55,0 cm

Product specifications

Devine Onyx 15S
passive subwoofer
woofer: 15"
voice coil: 4"
peak power: 2400W
RMS: 600W
frequency range: 35 Hz - 150 kHz
impedance: 8 Ohms
max. SPL: 126 dB
wheels: optional
dimensions: 530 x 700 x 625mm
weight: 32 kg

1x Devine MX-2000 2-Channel PA Power Amplifier (2x 1000W at 8 Ohms)

If masses of power is what you need, then the Devine MX-2000 is what you'll want. This forceful power amplifier delivers a 2x 1000W output at 8 Ohms and even kicks things up to 2x 1350W at 4 Ohms.

Product features

19-inch rack size: 2U
2-ohm compatible: No
Number of amplifier channels: 2
Audio loop output: No
Bridge mode: Yes
Sustainable product: Not specified
Input: RCA, RCA + XLR, XLR
Built-in filter: None
Built-in protection: Overload, thermal, short circuit, square wave / DC voltage, peak limiter, clip indicator
Built-in DSP processor: No
Cooling: Ventilator
RMS power (4 ohms) per channel: 1300 - 1399 watts
RMS power (at 8 Ohms) per channel: 1000 - 1099 Watts
Amplifier class: H
Amplifier output: Locking speaker connector, wire clamps
Equipped with crossover: No

Weight and dimensions including packaging

Weight: 16,6 kg
Dimensions: 53,5 x 49,0 x 14,0 cm

Product specifications

Devine power amplifier
series: MX
clean control panel with front ventilation panel
temperature-controlled fan cooling system with front-to-back cooling
magnetically suspended fans for increased lifespan and reduced noise
various models available to meet different demands in terms of power capacity and functions
19-inch rack compatibility (2U)
soft start (avoids power spikes, especially when switching on multiple amplifiers at once)
equipped with protection circuits and systems (clip limiter, DC output protection, power surge protection, etc)
front panel LED status indicators
supports standard stereo and bridge set-ups
adjustable signal input (stereo/parallel/bridge)
various professional inputs and outputs for optimum audio and eased installation
high-quality circuits and components for optimum power generation
power (RMS):
- 2x 1000W at 8 Ohms
- 2x 1350W at 4 Ohms
- bridged at 8 Ohm: 1x 2000W
class: H
frequency response: 20Hz - 20kHz
input sensitivity: 1.4V / 0.775V
input impedance: 20 kOhm / 10 kOhm
damping factor: >200
S/N ratio: >100 dB
power supply: 220 - 240V AC, 50/60 Hz
connections:
- inputs: XLR (balanced), RCA (unbalanced)
- speaker outputs: 2x speakON + wire terminals
- bridged outputs: 1x wire terminal
Ground Lift function
dimensions (W x D x H): 48.2 x 37 x 8.8cm (2 U/HE)
weight: 17.5 kg

4x Devine SPE25/10 10-Metre Speaker Cable, 2x2.5mm

Product features

Sustainable product: Not specified
Length: 10.00 m
Male/female: Female - female
Audio connector: Lockable speaker connector 4p
Number of cores: 2
Conductor diameter: 2.5 mm2

Weight and dimensions including packaging

Weight: 1,2 kg
Dimensions: 39,0 x 15,0 x 4,5 cm

Product specifications

speaker cable
connector 1: locking speaker connector (4SPP)
connector 2: locking speaker connector (4SPP)
high signal quality
cable type: 2x 2.5mm²
suited for a power of up to 2,000 W (PA)
length: 10m
colour: black

2x Devine Onyx 12 12-Inch Passive Speaker

Product features

Sustainable product: Not specified
Speaker connection: Locking speaker
Nominal impedance: 8 ohms
RMS capacity in watts: 200 - 349 W
Peak power in watts: 1,000 - 1,249 watts
Mid driver/woofer diameter: 12 inches
Tweeter diameter: 1.35 inches
Weight per speaker: 13 kg
Maximum SPL: 110 dB - 119 dB
Minimum frequency: 50 - 59 Hz
Maximum frequency: 19 - 19.9 kHz
Sensitivity: Not specified
Set: No
Installation speaker / 100 V: No
Speaker cabinet material: Plastic

Weight and dimensions including packaging

Weight: 15,4 kg
Dimensions: 68,0 x 43,5 x 43,0 cm

Product specifications

Devine Onyx 12
passive speaker
technical information:
- woofer: 12"
- tweeter: 1.35" compression driver, horn-loaded
- sound dispersion: 90 x 60 degrees
- output capacity: 300 W (RMS), 1200 W (peak)
- frequency range: 53 Hz to 19 kHz
- crossover frequency: 2.8 kHz
- impedance: 8 Ohms
- max. SPL: 119 dB
connectors: 2x lockable speaker connection (4P)
housing
- material: plastic
- grille: metal with acoustic foam
- rubber feet
- 2x recessed handles
- pole mount: 35mm
- dimensions: 358 x 356 x 613mm
- weight: 13.5 kg

1x Devine MX-800 2-Channel PA Power Amplifier, 2x 400W at 8 Ohms

Designed to power passive speakers, the hefty Devine MX-800 PA two-channel power amplifier supplies 400 Watts per channel at 8 Ohms or 600 Watts per channel at 4 Ohms.

Product features

19-inch rack size: 2U
2-ohm compatible: No
Number of amplifier channels: 2
Audio loop output: No
Bridge mode: Yes
Sustainable product: Not specified
Input: Jack (6.3 mm), jack (6.3 mm) + XLR, XLR
Built-in filter: None
Built-in protection: Overload, thermal, short circuit, square wave / DC voltage, peak limiter, clip indicator
Built-in DSP processor: No
Cooling: Ventilator
RMS power (4 ohms) per channel: 600 - 699 watts
RMS power (at 8 Ohms) per channel: 400 - 449 Watts
Amplifier class: AB
Amplifier output: Locking speaker connector, wire clamps
Equipped with crossover: No

Weight and dimensions including packaging

Weight: 12,2 kg
Dimensions: 52,0 x 40,5 x 14,0 cm

Product specifications

power (RMS):
- 2x 400W at 8 Ohms
- 2x 600W at 4 Ohms
- bridged at 8 Ohm: 1x 800W
Class AB
frequency response: 20Hz - 20kHz
input sensitivity: 1.4V / 32dB / 1.0V
input impedance: 20 kOhm / 10 kOhm
damping factor: >350
S/N ratio: >95dB
power supply: 220 - 240V AC, 50/60 Hz
connections:
- inputs: XLR/TRS (balanced)
- speaker outputs: 2x speakON + wire terminals
- bridged outputs: 1x speakON, optional
Ground Lift function
dimensions (W x D x H): 48.2 x 32.1 x 8.8cm (2 U/HE)
weight: 11.5 kg

2x Innox IVA07 M20 M20 Distance Rod

The Innox IVA07 M20 distance rod is designed to suspend a full-range speaker in the optimum position. Height adjustable, this rod is compatible with a speaker or subwoofer of any size.

Product features

Sustainable product: Not specified
Speaker pole mount: M20 screw thread
Height adjustable: Yes
Distance rod weight capacity: 20 -29 kg
Set: No
Maximum height of stand: 140 to 150 cm

Weight and dimensions including packaging

Weight: 1,7 kg
Dimensions: 76,0 x 9,0 x 9,0 cm

Product specifications

distance rod
material: steel
max. load capacity: 50kg
screwthread: M20
top side: 35mm tube
height: 800 - 1340mm (adjustable)
equipped with safety pin and knob for securing speakers
material: steel
colour: black
interior dimensions: 9 x 9 x 83cm
weight: 2kg

1x Omnitronic XO-230 Active Crossover (2-Way Stereo/3-Way Mono)

Demand full control over the sound? Add the Omnitronic XO-230 stereo crossover to your set-up and efficiently route the frequencies to counter any bottlenecks.

Product features

Stereo crossover: Two-way
Subwoofer output: Yes
Sustainable product: Not specified
Built-in limiter: No
Built-in compressor: No
Mono crossover: Three-way
Output connector: XLR (3-pin)
Input: XLR

Weight and dimensions including packaging

Weight: 2,4 kg
Dimensions: 53,0 x 25,0 x 10,0 cm

Product specifications

active crossover (2-way stereo/3-way mono)
power consumption: 8 W
crossover frequency: 45 - 9,600 Hz, 24 dB/oct, Linkwitz-Riley filters
filter: low cut: 40 Hz 12 dB/oct Butterworth
phase reverse switch
crosstalk: > 80dB
controls: mode switch (2-way stereo / 3-way mono)
connections:
- inputs: line via 2x 3-pin XLR
- outputs: line via 4x 3-pin XLR
dimensions: 48.3 x 15.2 x 4.45cm
weight: 1.87 kg
included:
- user manual
- power cable

1x Vonyx STM3030 4-Channel Mixer with USB and Bluetooth

Want to make a start as a DJ? Grab the Vonyx STM3030 4-channel mixer and get the option to load up MP3s via USB, SD and Bluetooth.

Product features

Number of auxiliaries: 0
Number of link channels: 3
Number of microphone channels: 1
Number of submasters: None
Compressor on the inputs: No
Crossfader: Yes
Audio ducking: Yes
Sustainable product: Not specified
Equalizer: None
Fader start support: No
Headphone output: Yes
Input: Jack (6.3 mm), RCA
Built-in audio player: USB, SD(HC), Bluetooth
Built-in effects: No
Input level meters: No
Level meters on the outputs: LED VU meter
Rack height: 3 U
Output connector: RCA
Volume control: Faders + knobs

Weight and dimensions including packaging

Weight: 1,0 kg
Dimensions: 30,0 x 20,0 x 10,0 cm

Product specifications

Vonyx STM3030
4-channel mixer
backlit controls
MP3 (SD or USB) player with display
Bluetooth
WAV record-function
channels:
2x switchable line/phono channels
1x switchable MP3/line channel
2x microphone channels
Monitor and Cue function per channel
Talkover function
Crossfader
frequency range: 20 Hz - 20,000 kHz
THD: <0.02%
microphone input level: 1mV, 1 kOhm
input level: phono 3mV, 50kOhm
input level: line 150mV, 100kOhm
mic signal-to-noise ratio: > 70 dB
phono signal-noise ratio: > 70dB
line signal-to-noise ratio: > 80 dB
output level: master 1.5V
headphone output level: 200mW
power: 220-240VAC 50 / 60Hz (12V power supply)
dimensions: 132 x 267 x 55mm
weight: 1.3 kg
included:
- power adapter

1x Skytec DJ Accessory Kit MK II bundle

Product features

On/Off Switch: Yes
Connection type: XLR 3p
Studio bundle components: Microphone, headphone
Rotatable earpad: No
Sustainable product: Not specified
Microphone sensitivity (dBV/PA): Not applicable
Microphone weight: 250-299 grams
Headphone construction: Closed
Microphone impedance: 600-649 ohms
In/on/over ear: Over-ear
Includes microphone: No
Foldable / detachable: No
Removable cable: No
Cable length: 200-249 cm
Maximum SPL: Not applicable
Maximum frequency: 10 - 10.9 kHz
Microphone accessories: Cable, bag / box, headphone
Microphone set: No
Minimum frequency: 100 - 149 Hz
Polar pattern: Cardioid
Audio connector: 3-pin XLR
Microphone type: Dynamic
Headphone design: Modern
Volume control: No
Setup type: Handheld microphone

Weight and dimensions including packaging

Weight: 1,4 kg
Dimensions: 21,0 x 21,0 x 9,0 cm

Product specifications

accessory set for DJs
headphones with 3.5mm jack
metal microphone with 4m cable and 6.3mm jack
speaker cable 0.7 mm² (10 m)
stereo RCA-RCA cable (2.5 m)
stereo RCA cable to stereo 3.5mm jack

1x Stagg STC3CMXM x2 Male XLR - x2 Male RCA Extenstion Cable, 3m

The Stagg STC3CMXM twin-cable is fitted with two male XLR plugs at one end and two male RCA tulip-plugs at the other end. Each side is thoughtfully finished with stereo red-and-black colour coding.

Product features

Sustainable product: Not specified
XLR plug type: 2 x XLR 3p male
RCA plug type: 2 x RCA male
Length: 3.00 m

Weight and dimensions including packaging

Weight: 225 gr
Dimensions: 24,0 x 8,5 x 3,0 cm

Product specifications

Stagg STC3CMXM
extension cable with high-quality connectors
cable length: 3m
plugs: x2 male XLR to x2 Male RCA
plugs finished with stereo colour coding
colour: black

4x Devine MIC100/1.5 XLR Microphone/Signal Cable, 1.5m

Product features

Sustainable product: Not specified
Audio connector: 3-pin XLR
Length: 1.50 m
Colour: Black
Set: No
(partially) coiled: No
Right angled or straight: Straight - straight

Weight and dimensions including packaging

Weight: 100 gr
Dimensions: 15,0 x 15,0 x 3,0 cm

Product specifications

XLR male - XLR female
can be used as a microphone cable or as an all-round signal cable
supple, rugged cable
high-grade connectors with locking option
connectors with pull relief to retain contact integrity
length: 1.5m
filling: cotton
oxygen-free copper
isolation diameter: 1.4mm
isolation colours: red and white
number of conductors: 2
inner conductor diameter: 0.226mm²
conductor dimensions: 20 x 0.12mm
helical sheathing: 0.12 x 64
cable diameter: 6mm
sheathing material: flexible PVC
operating temperature: -20 - +70°C
capacity @ 1 kHz:
- cond.-cond.: 131pF/m
- cond.-shield.: 178pF/m

Service promise