Discontinued, this product can no longer be ordered.
Not sure if the RØDE Wireless GO II Single Wireless Clip-On Microphone System is for you? Do a Choice Check.
Start Choice Checker
RØDE Wireless GO II Single Wireless Clip-On Microphone System
Product no: 9000-0087-1248
Bax Music Warranty:
This product comes with a 5 year warranty when you register it with warranty.rode.com/register. If the product is not registered it has a 3-year warranty.
General
The Rode Wireless Go II wireless microphone system sets you up with a dual receiver and a transmitter with an integrated microphone. Built with interviewing vloggers and YouTubers in mind, the receiver comes fitted with a mini-jack output for direct connection to the audio input of a smartphone, tablet, computer, or laptop, and for an even more streamlined set up, provides a USB-C port so it can be set up as a neat little audio interface. While the clip-on transmitter already comes with an integrated omnidirectional microphone, it's also been finished with a microphone input so you can just as easily hook up you're own lavalier or headset microphone. Since signal interference and drop-out can happen with even the best wireless set-ups, the Wireless Go II comes with a clever back-up system that automatically saves the audio to an internal memory built into the transmitter, thoughtfully saving you grief in the long run. The Rode Wireless Go II operates over the licence free, 2.4GHz frequency band.
Specifications
Product features
| On/Off Switch |
Yes |
| Number of wireless system channels |
1 |
| Number of microphones |
1 microphone |
| Bandwidth |
variable |
| Battery type |
rechargeable |
| Battery life (approx.) |
7 hours |
| Bit rate |
unknown / not applicable |
| Connects to computer via |
USB-A |
| Digital connection(s) |
USB-A, USB-C |
| Sustainable product |
not specified |
| Frequency suitable for Belgium |
yes, no licence required |
| Frequency suitable for Netherlands |
yes, no licence required |
| Frequency suitable for UK |
yes, no licence required |
| Worldwide frequency use |
yes, no licence required |
| Frequency band |
2.4 GHz |
| Headphone output |
no |
| Including lavalier microphone |
yes |
| Channel |
2.4 GHz |
| Low-cut filter |
no |
| Maximum sample rate |
not specified |
| Maximum SPL |
100 dB - 109 dB |
| Maximum frequency |
20 - 20.9 kHz |
| Included software |
none |
| Microphone accessories |
windshield, cable, bag / box |
| Minimum frequency |
50 - 59 Hz |
| Mono or stereo |
combination |
| Pad switch |
no |
| Polar pattern |
omni-directional |
| Software included |
no |
| Analogue audio output type |
unbalanced stereo line out (TRS mini-jack) |
| Type of frequency band |
2.4 GHz |
| Type of USB port |
USB-C |
| Setup type |
clip-on/headset microphone |
| Transmission power |
not specified |
Weight and dimensions including packaging
| Weight (incl. packaging) |
181 gr |
| Dimensions (incl. packaging) |
13,0 x 10,5 x 5,5 cm
|
Product specifications
- Rode Wireless Go 2 Single
- two-channel wireless clip-on microphone system for smartphones, tablets, and computers
- frequency band: 2.4GHz
- 1x PG88 dual receiver:
- output: 3.5mm TRS mini-jack
- digital port: USB-C
- multifunctional clip (also compatible with a camera shoe)
- dimensions: 44 x 46.4 x 18.5mm
- weight: 32g
- 1 x TX transmitters:
- built-in omnidirectional microphone
- 3.5mm TRS mini-jack microphone input for external microphone (not included)
- multi-functional clip
- dimensions: 44 x 45.3 x 18.5mm
- weight: 30g
- included:
- 2 x windshield (artificial fur)
- 1x storage pouches
- USB-A to USB-C cable
- 1x SC5 3.5mm mini-jack cable
Wednesday 17 April 2024 By Kasper | Bax Music
Part of Rode's popular Wireless Series, the new Interview PRO wireless handheld microphone is a solid add-on for a Rodecaster Pro II console or Wireless Go II set-up.
Read more…