RCF NXL 44-A MK2 3x10" 2-Way Full-Range Speaker

RCF NXL 44-A MK2 3x10" 2-Way Full-Range Speaker
Product no: 9000-0097-6914 Bax Music Warranty: This product comes with a 3-year warranty.

General

The RCF NXL 44-A MK2 full-range active speaker has been armed with no less than three 10-inch neodymium woofers for professional sound quality, making it an excellent pick for bands, DJs and clubs. Each woofer boasts a new-and-advanced transducer design to guarantee extra stability, an even faster response and reduced distortion at higher sound pressure levels. The bass performance is definitely worth writing home about as well, and thanks to RCF's Bass Motion Control, you won't even need a high-pass filter to maintain deep-diving lows without sacrificing stability or linearity.

Power That Moves

Driven by a built-in class-D amplifier, the NXL 44-A MK2 peaks at 2,100 Watts, which is almost double the output that any older models were able to bring to the table or DJ booth. Despite the increase in power capacity, the response is just as fast while any dynamics aren't affected by distortion. At the same time, the integrated amp module is extremely heat efficient, meaning there's no built-in fan taking up space. This forceful full-range speaker is fully focussed on music and, like all RCF units, features digital FiRPHASE filters to do away with phase-induced distortion and system latency issues. Last but not least, the speaker has been equipped with powerCON TRUE1 ports which means that the power signal can be daisy-chained to other speakers and that the speaker can be safely disconnected while the power is still active.

Specifications

Product features

Sustainable product	not specified
RMS power in watts	750 - 1,499 W
Maximum SPL	130 dB - 139 dB
Mid driver/woofer diameter	3 x 10 inches
Tweeter diameter	1.4 inches
Bluetooth	no
Playback options	none
Analogue audio output type	balanced line out (XLR)
Analogue audio input type	balanced line in (TRS jack), balanced line in (XLR)
Number of stereo AUX inputs	none
Total microphone inputs	1
Total guitar/bass inputs	none
Total line inputs	1
Passive speaker output	no
Minimum frequency	40 - 49 Hz
Maximum frequency	20 - 20.9 kHz
DSP	no DSP
Built-in equaliser	no
Suitable as monitor	no
Speaker cabinet material	wood
Mounting points	M10 screw thread, 35mm stand flange
Weight per speaker	33 kg

Weight and dimensions including packaging

Weight (incl. packaging)	35,5 kg
Dimensions (incl. packaging)	111,5 x 40,0 x 32,7 cm

Product specifications

acoustic specifications:
- frequency response: 45Hz - 20kHz
- max SPL at 1m: 135dB
- horizontal spread: 100°
- vertical spread: 25°
transducers:
- compression driver: 1x 1.5" neodymium, 3.0" voice coil
- woofer: 3x 10" with 2.5" voice coil
connections:
- signals: balanced and unbalanced
- input: XLR/Jack combo
- output: XLR
processor:
- crossover frequency: 800
- protection: thermal, excursion, RMS
- limiter: soft limiter
- controls: Linear, 2 Speakers, High-Pass, Volume
power capacity:
- total: 2,100W peak
- high frequencies: 700 W
- low frequencies: 1,400 W
- cooling: convection
- power port: powerCON TRUE1 TOP I/O
housing:
- speaker cabinet: Baltic birch plywood
- hardware: 8x M8, 8 x quick lock
- handle: 2x side-mounted
- stand flange
- grille: steel
- colour: black
dimensions (W x D x H): 29.75 x 37.3 x 108cm
weight: 33.4 kg