Crown XTi 1002 amplifier

Ordered before 10pm: Delivered in 2 Working Days (if in stock)
Free delivery from £50

Product information
Reviews (3)
Downloads (1)

Crown XTi 1002 amplifier
Product no: AXL-XTI1002 Bax Music Warranty: This product comes with a 3-year warranty.

General

Even though the first XTi series was a great success, Crown figured it could do with an upgrade and issued the XTi2. The XTi2 series is even better thanks to modern additions!

Powerful amplification in a compact housing

Like their predecessors, the amps from the XTi2 series are only 2 U high. As it weighs only 8 kilos, the XTi 1002 is a proper lightweight, and yet it is capable of producing a massive 700 Watts (at 2 Ohms) per side!

More than just an amplifier

However, the Crown XTi is more than just an amplifier, as it also features a built-in processor that allows you to use an equalizer, crossover, delay, peak limiter and numerous presets. This way, you gain optimal control over your entire setup without too much auxiliary equipment!

Specifications

Product features

Sustainable product	not specified
RMS power (4 ohms) per channel	500 - 599 watts
RMS power (at 8 Ohms) per channel	300 - 349 Watts
2-ohm compatible	yes
Amplifier class	not specified
Number of amplifier channels	2
19-inch rack size	2U
Amplifier output	XLR
Input	XLR
Equipped with crossover	yes, fixed
Built-in DSP processor	yes
Cooling	ventilator
Bridge mode	yes
Built-in protection	thermal, peak limiter, clip indicator
Audio loop output	yes
Built-in filter	not specified

Weight and dimensions including packaging

Weight (incl. packaging)	10,0 kg
Dimensions (incl. packaging)	57,0 x 49,0 x 18,0 cm

Product specifications

powerful, 2U high amplifier
with processor
power @ 2 ohms: 2x 700 W
power @ 4 ohms: 2x 500 W (1x 1,400W bridge)
power @ 8 ohms: 2x 275 W (1x 1,000W bridge)
volume control per channel
on/off switch
processor menu buttons with LCD

Processing:

input EQ with 6 filters per channel
crossover filters
output EQ with 8 filters per channel
delay function
SubHarmonic Synth: handles the subtones and lowers the sound by an octave
Peak Plus Limiter with threshold, attack and release
30 presets

Indicators:

signal indicator: green LED, 1 per channel
-10dB indicator, green LED, 1 per channel
-20dB indicator, green LED, 1 per channel
ready indicator, green LED, 1 per channel
clip indicator, red LED, 1 per channel
over-heating indicator, red LED, 1 per channel
on/off indicator, blue LED, 1x

Inputs and outputs:

3-pin XLR inputs, balanced, 1 per channel
loop connector for chaining, balanced, 1 per channel
Neutrik SpeakOn NL4MP outputs, 1 per channel
binding posts, 1 per channel

Technical:

signal/noise ratio: 100 dB
frequency range: 20 to 20,000 Hz
total harmonic distortion: 500
crosstalk: 20 to 1,000 Hz: >70dB
mains voltage: 100-230 V AC, 50/60 Hz
operating temperature: 0 to 40 degrees Celsius
steel housing
aluminium front panel
fan-cooled, front-to-rear
dimensions: 483 x 89 x 312 mm (19 inches, 2 U)
weight: 8.4 kg

Write a review

Reviews from other countries

Translate all reviews into English View original reviews

Bas N. January 22, 2015

Wrote the following about Crown XTi 1002 amplifier

Goede versterker.
Heb er zelf 2 in de verhuur zitten.
Ideale versterker voor in de verhuur.
Limiters in stellen, display vergrendelen en geen klant die mijn luidsprekers kapot krijgt. Ideaal.

Ook omdat er een PWM/hoogfrequent voeding inzit scheelt het enorm in het gewicht.
Bij mij hangen er 2 stuks 100 volt transformatoren van 450Watt achter (25 kg p/s), dus iedere kilo extra is niet handig.

Binnenkort komt ook in mijn 3de 100voltrack deze versterker te zitten.

sam n. January 21, 2013

Wrote the following about Crown XTi 1002 amplifier

Zeer degelijke versterker. Ook veel handig in te stellen configuraties zoals delay time per kanaal etc. Nog nooit problemen mee gehad. Aanrader!

Wesley R. July 25, 2011

Wrote the following about Crown XTi 1002 amplifier

Versterker is snel geleverd!! maar helaas maakt deze versterker qua vermogen totaal niet waar dan dat je er van mag verwachten, op 4 ohm mag je blij zijn als je er 40 tot 50w per kanaal eruit krijgt ( zou ongeveer 250 tot 300w moeten zijn ).
Verder werkt de procesoor als een zonnetje, en is het geluid goed!