Based on more than 21,240 customer reviews

DAP Palladium P-1200 Black Series PA amplifier

no reviews yet
DAP Palladium P-1200 Black Series PA amplifier

Discontinued

This product can no longer be ordered

Specifications

Product features

19-inch rack size
2U
2-ohm compatible
No
Number of amplifier channels
2
Audio loop output
No
Bridge mode
Yes
Input
Jack (6.3 mm), XLR
Built-in filter
None
Built-in protection
Overload, thermal, short circuit, square wave / DC voltage, clip indicator
Built-in DSP processor
No
Cooling
Ventilator
RMS power (4 ohms) per channel
800 - 899 watts
RMS power (at 8 Ohms) per channel
500 - 599 Watts
Amplifier class
H
Amplifier output
Locking speaker connector, wire clamps
Equipped with crossover
No

Weight and dimensions including packaging

Weight
22,0 kg
Dimensions
60,0 x 60,0 x 20,0 cm

Product specifications

  • powerful double Class- stereo PA amplifier
  • colour: black
  • affordable and reliable
  • XLR and jack inputs
  • lockable speaker connectors and cable clamps
  • stereo output: 2x 530 W RMS @ 8 ohms, 2x 800 W RMS @ 4 ohms
  • bridged output: 1600 W RMS @ 8 ohms
  • frequency range: 20 Hz - 45 kHz, -1 dB
  • THD+N: <0.05%
  • inter-modular distortion: <0.01%
  • damping factor (8 ohms): >250
  • slew rate: >40V/ µS
  • input CMRR: >60 dB
  • crosstalk 20 - 20,000 Hz: >60 dB
  • signal-noise ratio: 105 dB-A
  • input sensitivity: 1V~, +2.2 dBu
  • max. input voltage: +22 dBu
  • input impedance: 20 kOhms balanced, 10 kOhms unbalanced
  • security: temperature, short circuit, DC voltage, sub-sonic, high frequency, on/off
  • output modes: stereo, parallel, bridged
  • cooling: 2x DC ventilators with two speeds
  • ventilation: front to back
  • inputs per channel: 1x XLR female (pin 2+), 1x TRS jack (tip+)
  • outputs per channel: 1x lockable connector, 2x cable clamps (+ and -)
  • ground lift switch on board
  • power supply: 200 - 240V (50 Hz)
  • power consumption (2 x 4 ohms): 2300 W
  • operation: 2x volume controls on front, ground lift jumper on rear
  • LED indicators per channel, protect, clip, signal, power
  • fuse: 10AT, 5 x 20 mm
  • dimensions: 483 x 430 x 89 mm (WxDxH)
  • weight: 16.3 kg

No alternatives found

Specifications

Product features

19-inch rack size
2U
2-ohm compatible
No
Number of amplifier channels
2
Audio loop output
No
Bridge mode
Yes
Input
Jack (6.3 mm), XLR
Built-in filter
None
Built-in protection
Overload, thermal, short circuit, square wave / DC voltage, clip indicator
Built-in DSP processor
No
Cooling
Ventilator
RMS power (4 ohms) per channel
800 - 899 watts
RMS power (at 8 Ohms) per channel
500 - 599 Watts
Amplifier class
H
Amplifier output
Locking speaker connector, wire clamps
Equipped with crossover
No

Weight and dimensions including packaging

Weight
22,0 kg
Dimensions
60,0 x 60,0 x 20,0 cm

Product specifications

  • powerful double Class- stereo PA amplifier
  • colour: black
  • affordable and reliable
  • XLR and jack inputs
  • lockable speaker connectors and cable clamps
  • stereo output: 2x 530 W RMS @ 8 ohms, 2x 800 W RMS @ 4 ohms
  • bridged output: 1600 W RMS @ 8 ohms
  • frequency range: 20 Hz - 45 kHz, -1 dB
  • THD+N: <0.05%
  • inter-modular distortion: <0.01%
  • damping factor (8 ohms): >250
  • slew rate: >40V/ µS
  • input CMRR: >60 dB
  • crosstalk 20 - 20,000 Hz: >60 dB
  • signal-noise ratio: 105 dB-A
  • input sensitivity: 1V~, +2.2 dBu
  • max. input voltage: +22 dBu
  • input impedance: 20 kOhms balanced, 10 kOhms unbalanced
  • security: temperature, short circuit, DC voltage, sub-sonic, high frequency, on/off
  • output modes: stereo, parallel, bridged
  • cooling: 2x DC ventilators with two speeds
  • ventilation: front to back
  • inputs per channel: 1x XLR female (pin 2+), 1x TRS jack (tip+)
  • outputs per channel: 1x lockable connector, 2x cable clamps (+ and -)
  • ground lift switch on board
  • power supply: 200 - 240V (50 Hz)
  • power consumption (2 x 4 ohms): 2300 W
  • operation: 2x volume controls on front, ground lift jumper on rear
  • LED indicators per channel, protect, clip, signal, power
  • fuse: 10AT, 5 x 20 mm
  • dimensions: 483 x 430 x 89 mm (WxDxH)
  • weight: 16.3 kg

Product information

Product no: 9000-0004-1143

General

DAP's Palladium P-1200 amplifier is a powerful double Class-H stereo PA amplifier from the brand's Black Series. It's exactly the same as the silver variety from the Vintage series, boasting 2x 530 watts at 8 ohms and 2x 800 watts at 4 ohms, which means it's suitable for use with medium to large-sized cabinets. It's ideal for use in fixed as well as mobile installations, so if you want a versatile amp at an affordable price, the P-1200 is just the thing!

User-friendly and reliable

The Black Series Palladium P-1200 is easy and straightforward to use with two volume controls and an on/off button. Connect your audio source easily by means of the XLR or TRS jack inputs. For a fast and reliable connection, use the plug-and-play lockable speaker connector, but for fixed installations, there is also a more traditional cable clamp that can be screwed tight. With a protective circuit on board, the P-1200 won't have any problems like short circuiting or overheating. What's more, it's equipped with a built-in clip limiter and a soft start switch.

Proven benefits of the Palladium amplifier

To this day, DAP's Audio Palladium series is still one of the most affordable high-output amplifiers on the market. It consists of seven 2U 19-inch amps that vary from 400 to 1200 watts, but they have two things in common: quality and affordability.

Bax Music Warranty This product comes with a 3-year warranty.

Reviews

A review can no longer be written about this item
There are no reviews for this product yet.

Other products from DAP

Find all products of the brand DAP

Alternative products by other brands

Search all products in category Amplifiers
Compare your gear (1/10)