(B-Stock) RØDE NTG4+ Directional Condenser Microphone

B-stock information

Warranty:	This product comes with a 3-year warranty.
Complete	Yes
Original packaging	Damaged
Condition of product	Traces of use (no damage/scratches)
What is a B-Stock Item? Any item we can no longer sell as new is labelled B-stock. This can be for a number of reasons, including damaged or missing packaging, or because the item shows light signs of use. In any case, you can expect the item to work just fine. Always Read the B-Stock Info Every B-stock product page includes relevant information about the item. Be sure to read it in full! Under the Product Information tab, you will find the original product description and specifications, which may refer to accessories that are not included with the B-stock item. This can be a cable, a remote control, software or any other accessory. B-Stock Product Photos B-stock photos can give you a good idea of the condition of the item, its packaging and (missing) contents. Here, what you see is what you get. The photos usually include: A photo of the original item A photo of the B-stock item plus included packaging and accessories (if applicable) A photo of the front of the B-stock item A photo of the back of the B-stock item Photos of any damage (if applicable) Original Packaging Status Packaging in good condition: undamaged, at most some tape residue Packaging damaged: box has dents, tears and/or holes Packaging missing: has been replaced with a Bax Music box. Item Condition Status: New: the product itself is like new, but the packaging may no longer look like new Traces of use (no damage/scratches): smudges, fingerprints and/or dust Scratches/damage: product has scratches and obvious damage Can I Return a B-Stock Item? Yes, our 30-day money-back guarantee also applies to B-stock items. Do I Get a Warranty on B-Stock Items? Yes, the standard warranty period usually applies to B-stock items as well.

(B-Stock) RØDE NTG4+ Directional Condenser Microphone
Product no: 5000-0027-1864 Bax Music Warranty: This product comes with a 3-year warranty.

General

The Rode NTG4+ is a directional condenser microphone that's based on the successful NTG2. It has a brand-new condenser capsule, however, that's characterised by low noise, high sensitivity and three handy controls. Its built-in battery lets you record audio for 150 continuous hours, without having to use phantom power (which still is an option, however). The XLR output features a USB connector, which lets you charge the battery within two hours.

The Rode NTG4+: Professional recordings

With its high-quality super-cardioid capsule, this shotgun microphone picks up sound in a highly accurate and directional fashion, making it fit for creating professional speech recordings. If the sound source is too loud, the pad button comes in handy, as it lowers the sensitivity by 10 dB. The high-pass function counters low frequencies - one press of a button and everything below 75 Hz is left out of the recording. Via the XLR output, the NTG4+ sends the sound in broadcasting quality to your camera or mixer. The presence of a battery precludes the need for a phantom power supply.

Tips or comments about this product

Please note:
It is normal for Rode microphones that one of the XLR pins (the earthing pin) sticks out a bit.
Only the products listed under the product specifications are included. All other pictured products merely serve an illustrative purpose.

Specifications

Product features

Complete	Yes
Sustainable product	not specified
Energy source	phantom + battery
Microphone sensitivity (dBV/PA)	-32
Microphone impedance	200-249 ohms
Length in mm	200 - 399
Maximum SPL	130 dB - 139 dB
Maximum frequency	20 - 20.9 kHz
Minimum frequency	20 - 21 Hz
Original packaging	Damaged
Condition of product	Traces of use (no damage/scratches)

Weight and dimensions including packaging

Weight (incl. packaging)	100 gr
Dimensions (incl. packaging)	34,0 x 14,0 x 7,0 cm

Product specifications

shotgun microphone
broadcasting sound quality
low noise
pickup pattern: super-cardioid
rugged metal construction
high-frequency boost
high pass filter (flat/75 Hz)
pad: -10 dB
frequency response: 20 Hz - 20 kHz
output impedance: 200 ohms
max. SPL: 135 dB
sensitivity: -32.0 dB re 1 volt/Pascal (25.00 mV at 94 dB SPL) +/- 2 dB at 1 kHz
self-noise: 16 dB-A
power supply: 12V, 24V, 48V phantom power or built-in battery
battery life of over 150 hours
battery rechargeable via USB input (charged in two hours)
output: XLR (3-pin)
including microphone clip (RM5), bag with zipper (ZP1), foam windshield, USB cable (for charging)
dimensions: 278 x 22 x 22 mm
weight: 176 grams

Write a review

Colin R.(COLINROBOT) March 7, 2022