Yuer RS-21 Buffer Boost effects pedal

General

Do you want to clean up the signal from your electric guitar and give it a bit more volume? The Yuer RS-21 Buffer Boost combines both functions in a single compact effects pedal. This buffer and booster from the RS-10 series accurately reproduces the frequencies of your input signal and helps to remove unwanted signal content. This allows you to route your original guitar tone in a controlled manner to the next pedals or your amplifier. Using the Boost control, you can add up to 6 dB of clean gain as required. This means you decide for yourself how much extra level you need, whilst the separate low-cut and high-cut switches give you greater control over the frequency range.

Precise tone control in a compact housing

Set the low-cut switch to 140 Hz to roll off low frequencies; set the high-cut switch to 4.5 kHz to roll off the highs. This allows you to tailor the signal from your electric guitar precisely to your sound. The aluminium casing measures just 92 x 49 x 46 millimetres, so this pedal takes up very little space. Connections are made via the 6.3-millimetre mono jack input and output. The status LED indicates whether the effect is active, and the footswitch controls the true bypass. Please note: the required 9V DC adaptor with a negative centre pin is available as an optional extra. Battery operation is not possible.