Audio Technica VM-540ML/H Dual MM Stereo Cartridge With Micr

Audio Technica VM-540ML/H Dual MM Stereo Cartridge With Microline Stylus and Headshell
Product no: 9000-0104-4933 Bax Music Warranty: This product comes with a 3-year warranty, the styluses come with a manufacturing defects warranty.

General

For a high-quality Moving Magnet cartridge, the Audio Technica VM-540ML/H is the place to be. It is equipped with a microline stylus, which results in perfect reproduction when it comes to treble and clarity. This is because the shape of the stylus ensures better contact within the grooves of your vinyl record and, in addition, there is less wear and tear for your record and the stylus itself. To make the right match in terms of left and right channel position, two magnets placed in a V-shape have been used. This improves not only the channel separation but also the frequency range. A separator plate placed in the centre of the cartridge prevents crosstalk to below 40 dB and to properly deal with vibrations, cast aluminium has been chosen for the housing.

Specifications

Product features

Sustainable product	not specified
Colour	orange, black
Set	no
Type of stylus	other
Type of turntable component	cartridge with headshell

Weight and dimensions including packaging

Weight (incl. packaging)	100 gr
Dimensions (incl. packaging)	10,0 x 8,0 x 5,0 cm

Product specifications

Audio Technica VM-540ML/H
frequency response: 20 - 27,000hz
channel separation: 28db (1khz)
vertical tracking angle: 23˚
vertical tracking force: 1.8 to 2.2g (2.0g standard)
needle construction: naked rectangular bar
recommended load impedance: 47,000ω
coil impedance: 2,700ω (1khz)
output voltage: 4.0mv (1khz. 5cm/sec)
output channel balance: 1.0db (1khz)
needle shape: microlinear
cantilever: aluminium tapered tube
static compliance: 40 x 10-6cm/dyne
dynamic compliance: 10 x 10-6 cm/dyne (100hz)
mounting: 1/2" retma
recommended load capacity: 100 - 200pf
replacement needle: vmn40ml
needle size: 0.12 x 2.2 mil
type: vm-type
weight: 16.8g
dimensions: 17.3 (h) x 17.0 (w) x 28.2 (l) mm
accessories included:
- element fixing screws 5mm ×2 and 10mm ×2
- spacers ×2
- hexagon nuts ×2