Audio Technica VM-760SLC Dual MM Stereo Cartridge with Shiba

Audio Technica VM-760SLC Dual MM Stereo Cartridge with Shibata Stylus
Product no: 9000-0104-4645 Bax Music Warranty: This product comes with a 3-year warranty, the styluses come with a manufacturing defects warranty.

General

The Audio Technica VM-760SLC is a dual Moving Magnet cartridge fitted with a diamond special line contact stylus. This lightweight needle attached to an aluminium needle carrier guarantees highly accurate tracking and a flat frequency response. To make the right match in terms of left and right channel position, two magnets placed in a V-shape have been used. This not only improves the channel separation but also has a positive impact on the frequency range. A separator plate placed in the centre of the cartridge prevents crosstalk to below 40 dB, and to properly handle vibrations, cast aluminium has been chosen for the enclosure.

Specifications

Product features

Sustainable product	not specified
Colour	gold / bronze / brass / copper, black
Set	no
Type of stylus	other
Type of turntable component	cartridge

Weight and dimensions including packaging

Weight (incl. packaging)	100 gr
Dimensions (incl. packaging)	10,0 x 8,0 x 5,0 cm

Product specifications

Audio Technica VM-760SLC
frequency response: 20 - 30,000hz
channel separation: 30db (1khz)
vertical tracking angle: 23˚
vertical tracking force: 1.8 to 2.2g (2.0g standard)
needle construction: naked rectangular diamond rod
recommended load impedance: 47,000ω
coil impedance: 2,700ω (1khz)
output voltage: 4.0mv (1khz. 5cm/sec)
output channel balance: 1.0db (1khz)
needle shape: special line contact
cantilever: tapered aluminium tube
static compliance: 40 x 10-6cm/dyne
dynamic compliance: 10 x 10-6 cm/dyne (100hz)
mounting: 1/2" retma
recommended load capacity: 100 - 200pf
replacement needle: vmn60slc
needle size: 0.28 x 1.5 mil
type: vm-type
weight: 8.0 gr
dimensions: 17.3 (h) x 17.0 (w) x 28.2 (l) mm
supplied accessories:
- mounting screws 5 mm ×2 and 10 mm ×2
- spacer ×2
- hexagon nut ×2
- non-magnetic screwdriver ×1
- brush ×1
- wire set ×1