Sennheiser e 845s with Mixer and Cable

4.7 / 5

285 reviews

Discontinued, this product can no longer be ordered.

No alternatives found

Not sure if the Sennheiser e 845s with Mixer and Cable is for you? Do a Choice Check. Start Choice Checker

Product information
Videos (1)
360° Photo
Reviews (285)
Downloads (3)

Sennheiser e 845s with Mixer and Cable
Product no: 9000-0058-1554 Bax Music Warranty: Sennheiser E-845S Dynamic Vocal Microphone This product comes with a 3-year warranty. Devine MixPad 602-FX-USB 6-Channel Mixer with FX and USB This product comes with a 3-year warranty. Devine MIC100/5 XLR Microphone/Signal Cable, 5m This product comes with a manufacturing defects warranty.

Specifications

1x Sennheiser E-845S Dynamic Vocal Microphone
The Sennheiser E 845-S is a high-quality dynamic vocal microphone that will specifically pick up your vocals. This 'S'-version is equipped with a handy noise-free on/off switch.

Product features

Sustainable product	not specified
Minimum frequency	40 - 49 Hz
Maximum frequency	16 - 16.9 kHz
Polar pattern	super cardioid
Maximum SPL	not specified
Microphone sensitivity (dBV/PA)	-55
Microphone impedance	350-399 ohms
Audio connector	3-pin XLR
On/Off Switch	Yes
Microphone weight	300-349 grams
Microphone set	no
Microphone accessories	microphone clip, bag / box

Weight and dimensions including packaging

Weight (incl. packaging)	632 gr
Dimensions (incl. packaging)	26,0 x 12,0 x 8,0 cm

Product specifications

- dynamic vocal microphone
- noiseless on/off switch
- solid completely metal casing
- excellent rejection of feedback
- full dynamic range and flat frequency response for an excellent signal quality
- consistent on/off-axis and proximity response
- good rejection of handling noise
- hum-compensating coil
- dynamic transducer
- super-cardioid pickup pattern
- frequency response: 40 to 16,000 Hz
- sensitivity (free field, no load): 1.8 mV/Pa at 1 kHz
- nominal impedance of 350 Ohm
- minimum terminating impedance of 1,000 Ohm
- XLR-3 connector
- dimensions: 46 x 185 mm (Ø x 185)
- weight (excl. cable): 330 gr

1x Devine MixPad 602-FX-USB 6-Channel Mixer with FX and USB
The Devine MixPad 602-FX-USB combines the ultra-functionality of two mono channels and two stereo channels with an internal FX module and a USB interface. Mix live, playback media and record directly to your computer.

Product features

19 inches	no
Number of auxiliaries	1 - 2
Number of microphone inputs	2
Number of mono channels	2
Number of stereo channels	2
Number of submasters	none
Sustainable product	not specified
Phantom power	yes
Headphone output	yes
Built-in audio interface	USB (2x2 I/O)
Built-in audio player	no
Built-in effects	yes
Built-in mixer effects	reverb/delay/modulation
Inputs	no
Type of mixer inputs	microphone input (XLR), balanced line input (TRS jack), unbalanced line input (RCA)
Type of mixer	studio / PA mixer
Type of mixer outputs	balanced line output (TRS jack), stereo headphone output (TRS jack or mini jack)
Volume control	knobs

Weight and dimensions including packaging

Weight (incl. packaging)	1,7 kg
Dimensions (incl. packaging)	40,0 x 24,5 x 9,5 cm

Product specifications

Devine MixPad 602-FX-USB
2 mono channel:
- microphone input: 3-pin XLR
- mono line input: 6.35 mm TRS balanced/TS unbalanced
- trim control
- 3-band EQ
- pan control
- CLIP LED indicator
- channel volume control
- FX intensity control
2x stereo channels:
- mono (L) or stereo input (L+R): RCA
- balanced TRS jack/TS jack unbalanced
- balance control
- CLIP LED indicator
- channel volume control
- FX intensity control
USB audio interface: USB 44.1 kHz, 16-bits
Internal FX module: 24-bits
- Small hall
- Large hall
- Small room
- Bright room
- Thin plate
- Plate
- Spring reverb
- Arena
- Analogue Delay
- Chorus + Delay
- Stereo Chorus
- Flanger
- Phaser
- Phaser 2
- Flanger Delay
- Vocal Echo
dimensions: 24.0 x 18.4 x 4.7 cm
weight: 1.2 kg

1x Devine MIC100/5 XLR Microphone/Signal Cable, 5m
Fitted with robust plugs and wrapped up inside a flexible yet durable outer shell, the Devine MIC100 is the ideal cable for optimally transferring any XLR audio signal from point A to point B. This is the 5-metre model.

Product features

(partially) coiled	no
Sustainable product	not specified
Right angled or straight	straight - straight
Colour	black
Length	5.00 m
Podcast bundle	no
Set	no
Audio connector	3-pin XLR
Accessory type	cable
Type of vlogging accessory	cable

Weight and dimensions including packaging

Weight (incl. packaging)	288 gr
Dimensions (incl. packaging)	24,0 x 20,0 x 4,0 cm

Product specifications

XLR male - XLR female
can be used as a microphone cable or as an all-round signal cable
supple, rugged cable
high-grade connectors with locking option
connectors with pull relief to retain contact integrity
length: 5m
filling: cotton
oxygen-free copper
isolation diameter: 1.4mm
isolation colours: red and white
number of conductors: 2
inner conductor diameter: 0.226mm²
conductor dimensions: 20 x 0.12mm
helical sheathing: 0.12 x 64
cable diameter: 6mm
sheathing material: flexible PVC
operating temperature: -20 - +70°C
capacity @ 1 kHz:
- cond.-cond.: 131pF/m
- cond.-shield.: 178pF/m

A review can no longer be written about this item

GABRIEL MC C. April 2, 2026

Wrote the following about Sennheiser E-845S Dynamic Vocal Microphone

Excellent mic..needed something quality for using along with my marshall acoustic combo..I have used cheaper but fully reccomend this mic.

Robbie December 3, 2024