DBX 215S equaliser

DBX 215S equaliser
Product no: AXL-215S Bax Music Warranty: This product comes with a 3-year warranty.

General

DBX's equalisers are the industry standard when it comes to touring, studio applications and audio installations. That makes sense considering the consistent high-quality performances of DBX during the last forty years. The 215S employs DBX's famous pro EQs. It can take up the most demanding sound amplifier situations. Yet, it has simple controls which are really easy to use.

A quick survey of the 215S

The DBX 215S has two 15-band channels with 2/3 octave equalisation. This is combined with ±12 dB input amplification and a switchable ±6 dB or ±12 dB boost/cut range. The sliders are 20 mm long and are non-conductive. All of this results in an intuitive user interface. This is complemented by VU meters for the output. The 215S has a wide frequency response of 10 Hz to 50 kHz. The components have a high quality considering the dynamic range of 112 dB, with accurate attention for detail.

The equaliser for professionals

The 215S provides exceptional sound and real reliability. It ensures that your sound system will always give its best performance. The 215S can be used for studio applications, on the road and for audio installations. The 215S deserves its place in the series of excellent DBX signal processors.

Specifications

Product features

Sustainable product	not specified
Number of channels	2
Analogue audio input type	balanced line in (TRS jack), balanced line in (XLR)
Analogue audio output type	balanced line out (TRS jack), balanced line out (XLR)
Frequency bands per channel	11 - 20 bands
Built-in limiter	no
Built-in compressor	no
19-inch rack size	1U
Switchable boost/cut	yes
Feedback dection/eliminator	no
Equipped with tube	no

Weight and dimensions including packaging

Weight (incl. packaging)	2,8 kg
Dimensions (incl. packaging)	56,0 x 29,5 x 6,5 cm

Product specifications

- equaliser
- double 15-band, 2/3 octave, constant Q-frequency band
- switchable boost/cut ranges of ±6 or ±12 dB
- bypass switch on the front panel
- ±12 dB input amplifier range
- 4-segments LED ladders for output levels
- XLR and TRS inputs and outputs
- frequency response of < 10 Hz to > 50 kHz
- dynamic range of more than 108 dB
- input connectors: ¼ inch TRS, female XLR (pin 2 hot)
- input type: electronic balanced/unbalanced, RF filtered
- input impedance: balanced 40 kOhm, unbalanced 20 kOhm
- maximum input level: +21 dB balanced or unbalanced
- CMRR input: > 40 dB, usually> 55 dB at 1 kHz
- output connectors: ¼ inch TRS, male XLR (pin 2 hot)
- output type: impedance balanced/unbalanced, RF filtered
- output impedance: balanced 100 Ohm, unbalanced 50 Ohm
- maximum output level in dBu: > +21 dBu balanced/unbalanced at 2 kOhm or more
- maximum output level in dBu: > 18 dBm balanced/unbalanced at 600 Ohm
- band width: 20 Hz to 20 kHz; +0.5 / -1 dB
- frequency response:< 10 Hz to > 50 kHz, +0.5 / -3 dB
- dynamic range: usually > 112 dB
- signal/noise ratio: usually > 95 dB
- THD + natural noise: <0.003%
- crosstalk interchannelled: < - 90 dB, 20 Hz to 20 kHz
- EQ bypass: avoids the graphic equaliser in the signal path
- low cut: activates the 50 Hz 12 dB/octave high-pass filter
- power connector: IEC receptacle
- power consumption: 15 W
- mains power connector: 100-240 VAC 50/60 Hz
- dimensions: 483 x 44 x 152 mm (W x H x D)
- weight: 2.2 kg

Write a review