Based on more than 21,240 customer reviews

Tascam DR-10CS recorder for beltpack system (Sennheiser)

4 / 5
Tascam DR-10CS recorder for beltpack system (Sennheiser)

Discontinued

This product can no longer be ordered

Specifications

Product features

Number of built-in microphones
0
Number of XLR mic inputs
0
Audio formats
WAV / PCM, MP3
Bit rate
24-bit
Sustainable product
Not specified
Built-in speakers
Yes
Maximum sample rate
48 kHz
Max. playback tracks
2
Max. simultaneous recording tracks
2
Recorder mounting possibilities
Belt clip
Timecode I/O
No
Analogue audio input type
Microphone input (TRS mini-jack)
Storage type
Micro SDHC / micro SDXC
Recorder type
Mini recorder for clip-on microphone
Recorder outputs
Line out (TRS mini jack)
Power options
Batteries

Weight and dimensions including packaging

Weight
300 gr
Dimensions
15,0 x 12,0 x 6,0 cm

Product specifications

  • audio recorder
  • to be placed between microphone and beltpack transmitter
  • specifically developed for Sennheiser microphones
  • signal quality: 48 kHz, 24 bits
  • storage medium: micro SD (max. 2 GB) / SDHC (max. 32 GB)
  • storage format: BWF (Broadcast Wave Format)
  • dual recording mode makes a back-up recording at a lower sound level
  • hold function prevents you from accidentally switching the device off
  • limiter
  • low-cut filter
  • auto gain
  • OEL display
  • battery life: more than 8 hours using a single AAA battery
  • infrared communication between various units
  • headphone connector: 3.5mm jack
  • included: USB cable, connection cable, carrying case, belt and manual
  • dimensions: 52 x 56 x 24 mm
  • weight: 63 grams (battery included)
  • colour: black

No alternatives found

Specifications

Product features

Number of built-in microphones
0
Number of XLR mic inputs
0
Audio formats
WAV / PCM, MP3
Bit rate
24-bit
Sustainable product
Not specified
Built-in speakers
Yes
Maximum sample rate
48 kHz
Max. playback tracks
2
Max. simultaneous recording tracks
2
Recorder mounting possibilities
Belt clip
Timecode I/O
No
Analogue audio input type
Microphone input (TRS mini-jack)
Storage type
Micro SDHC / micro SDXC
Recorder type
Mini recorder for clip-on microphone
Recorder outputs
Line out (TRS mini jack)
Power options
Batteries

Weight and dimensions including packaging

Weight
300 gr
Dimensions
15,0 x 12,0 x 6,0 cm

Product specifications

  • audio recorder
  • to be placed between microphone and beltpack transmitter
  • specifically developed for Sennheiser microphones
  • signal quality: 48 kHz, 24 bits
  • storage medium: micro SD (max. 2 GB) / SDHC (max. 32 GB)
  • storage format: BWF (Broadcast Wave Format)
  • dual recording mode makes a back-up recording at a lower sound level
  • hold function prevents you from accidentally switching the device off
  • limiter
  • low-cut filter
  • auto gain
  • OEL display
  • battery life: more than 8 hours using a single AAA battery
  • infrared communication between various units
  • headphone connector: 3.5mm jack
  • included: USB cable, connection cable, carrying case, belt and manual
  • dimensions: 52 x 56 x 24 mm
  • weight: 63 grams (battery included)
  • colour: black
bax-shop.uk | B-stock

Product information

Product no: 9000-0014-2998

General

Many artists and speakers use a wireless microphone system. Small wonder, as it gives you tremendous freedom of movement. The concept is simple: a microphone is connected by means of a short cable to a beltpack system, which wirelessly transmits a signal to a receiver. However, what happens when your wireless signal is interrupted right in the middle of a recording? And what if you want to keep a recording of your speech, but the engineer who operates the receiver is too busy to make one for you? Fortunately, all of these issues are easily taken care of by means of Tascam's DR-10CS recorder for beltpack systems (Sennheiser).

Characteristics of the Tascam DR-10CS recorder for beltpack system (Sennheiser)

The Tascam DR-10CS is an audio recorder that can be placed between your Sennheiser microphone and your beltpack transmitter. The signal is initially registered by the Tascam recorder, which records it to a micro SD/SDHC card, before it is transferred to the beltpack transmitter, which then sends it to the engineer at the other end of the venue. That means you always have your own recording to fall back on, even if something goes wrong on the receiver end. Just imagine saving the day at a special ceremony like a wedding - eternal gratitude is guaranteed!

Practical matters

At a resolution of 48 kHz/24 bits, the quality of your recordings is solid as a rock. A dual recording function makes a second recording at a lower sound level, so you always have a back-up track for your edits when the primary track turns out to be distorted. Thanks to a limited and a low-cut filter, a stable signal is ensured. The Tascam DR-10CS offers an impressive battery life of more than eight hours using a single AAA battery. If you're using more than one unit, you can use an infrared signal to share settings between the recorders. Once you start working with this compact device, you'll never want to be without it again!

Tips or comments about this product

-

Bax Music Warranty This product comes with a 3-year warranty.

Reviews (1)

4.0
1 review

Rating

5 stars 0 4 stars 1 3 stars 0 2 stars 0 1 star 0
A review can no longer be written about this item

Reviews from other countries

4 / 5

Tascam DR-10CS recorder for beltpack system (Sennheiser)

Great for a reliable tiny recorder that you can easily hide on your talent. The audio quality is OK as long as you use a decent lav like a Sanken cos11. The menu is not very friendly useable but after some practice is becomes a bit easier to use.
 | 
This review was automatically translated from Dutch.

Other products from Tascam

Find all products of the brand Tascam

Alternative products by other brands

Search all products in category Field Recorder

Related products from Tascam

Find all products from the brand Tascam in the category Field Recorder
Compare your gear (1/10)
Clear Compare