Complete battery PA: LD Systems ANNY 10 with 6-channel mixer, Bluetooth 5.0 and TWS. Includes B8 receiver, bodypack and headset (823-832/863-865 MHz).
Accu-PA set with LD Systems ANNY 10, 6-channel mixer and Bluetooth 5.0. Including 2x B5 receiver, wireless hand mic and headset+bodypack (584-608 MHz).
Accu-PA with 10-inch speaker, 6-channel mixer and Bluetooth 5.0. Includes 2x B6 receiver, wireless handheld and headset with bodypack (655-679 MHz).
Complete battery-powered speaker set with 10-inch woofer, 6-channel mixer and Bluetooth 5.0. Includes 2x ANNY B8 receiver, wireless handheld microphone and headset + bodypack.
Complete battery-PA speaker with 10-inch woofer, 6-channel mixer and Bluetooth 5.0. Includes 2x B5 receiver and 2 wireless handheld microphones (584 - 608 MHz).
Portable ANNY 10 accu-PA with 6-channel mixer, Bluetooth 5.0 and TWS. Includes 2 wireless handheld mics and 2 B6 receivers (655-679 MHz).
Accu-PA speaker with 6-channel mixer, Bluetooth 5.0 and Priority. Includes 2 wireless handheld microphones + 2 B8 receivers (823-832/863-865 MHz).
Mobile ANNY 10 battery PA with 6-channel mixer, Bluetooth 5.0 and TWS. Includes B5 receiver and wireless handheld microphone (584 - 608 MHz), ready for speech and music.
Portable LD Systems ANNY 10 battery-PA with 6-channel mixer, Bluetooth 5.0 and TWS. Includes wireless handheld microphone + receiver (B6: 655-679 MHz).
Receiver module for LD Systems ANNY® speakers (B5: 584-608 MHz). With 12 channels, IR synchronisation, squelch and separate volume control, incl. separate antenna.
Receiver module for LD Systems ANNY® speakers (B6: 655-679 MHz). With 12 channels, IR synchronisation, squelch and separate volume control, includes separate antenna.
Original LD Systems replacement battery (3200 mAh) for the MAUI 5 GO 100. With Quick-Swap and LED status indication, up to 4 hours at full power and quick recharge.
Original LD Systems replacement battery for MAUI 5 GO 100, 3200 mAh LG Chem li-ion. Quick-Swap switching during use, LED status and fast charging.
Universal LD Systems U-bracket for the ICOA 12, for wall mounting (horizontal/vertical) or truss (with optional clamp). Rotatable up to 180°.
Robust steel U-bracket for the LD Systems ICOA 15, for horizontal/vertical wall mounting or truss (with optional clamp) and rotatable up to 180°.
White steel U-bracket for the LD Systems ICOA 15, for horizontal or vertical wall mounting or truss mounting (with optional clamp), up to 27 kg load capacity.
White steel wall bracket (U-bracket) for the LD Systems SAT 262 G2. Powder-coated, swivelling for optimum directional angle and suitable for up to 12 kg.
Black steel rackmount kit for mounting an LD Systems U300 Dual Receiver in a standard 19-inch rack, including cover caps and mounting screws.
Black steel rackmount kit for LD Systems U500 IEM Transmitter or U300 IEM Transmitter, including BNC cable, BNC adapter, cover caps and mounting screws.
Stable round steel speaker stand base for LD Systems CURV 500, with integrated extension and as a sturdy base for the CURV 500 DB spacer bar.
Sturdy black speaker stand for LD Systems DAVE 10 G4X satellites, with star flange adapter and quick height adjustment from 108 to 168 cm on a stable round base.
Weather cover for LD Systems ICOA 12 and ICOA PRO 12, made of water-repellent 1680D nylon with 8 mm padding, roll-up front, flap openings and an outer pocket.
Magnetic protective cover for the connection plate of the LD Systems MAUI 11 G3 SUB, MAUI 28 G3 SUB and MAUI 44 G2 SUB; keeps dust and dirt out when used without a column.
Magnetic protective cover for the column connection plate of the LD Systems MAUI 11/28 G3 SUB W and MAUI 44 G2 SUB W; keeps dust and dirt out.
Ruggedly padded, water-repellent 1680D nylon protective case for the LD Systems MON 10 A G3 monitor, with roll-up front and flaps for all connections.
Robust, 8 mm padded 1680D nylon protective case for the LD Systems MON 12 A G3, water-repellent and can be used while playing.
Ruggedly padded, water-repellent 1680D nylon case for the LD Systems MON 15 A G3 monitor, with roll-up front and zip flaps for all connections.
Padded, water-repellent 1680D nylon protective case for the LD Systems MON 8 A G3 stage monitor, with roll-up front and flaps for controls and connections.
Pre-assembled 2.2-metre speaker cable with standard speaker connectors at both ends, intended for use with the LD Systems CURV 500® system.
Ready-made 3-metre speaker cable for LD Systems CURV 500®, with standard speaker connector and terminal block connection.
Pre-assembled 8-metre speaker cable with standard speaker connectors at both ends, suitable for LD Systems CURV 500®.
Complete LD Systems STINGER G3 gala PA system with 2x STINGER 28 G3 tops, 2x SUB 18 G3 subs and DSP 45K rack, incl. covers and roller plates.
White LD Systems MON 15 A G3: active 15" coax stage monitor with 300W RMS/1200W peak, 129 dB SPL, DynX DSP, EQ/presets, delay and loop-through.
Handy casterboard made of 15 mm plywood with polyurea coating, especially for the LD Systems MAUI 11 G3 subwoofer, with 4 heavy 80 mm swivel castors, 2 of which are braked.
Robust 15 mm plywood casterboard for the LD Systems MAUI 28 G3 subwoofer, with polyurea coating and 4 castors (2 braked) for smooth transport.
Universal LD Systems U-BAG carry bag for (half-rack) wireless and in-ear sets, water-repellent and dustproof, with a zip and a detachable shoulder strap.
Compact 1U Class D power amplifier with 2x 100W @4Ω, XLR/RCA/jack inputs, Speakon-compatible outputs and comprehensive protection for mobile and installation.
Ultra-compact Class D 1U power amplifier with 2x 200W @4Ω or 1x 400W @8Ω bridged, with XLR/RCA/jack inputs and protections.
Ultra-compact 1U Class D power amplifier with 2x 350W @4Ω, 2x 200W @8Ω or 700W bridged, plus XLR/RCA/jack inputs and limiter.
10-metre 5-pole XLR system cable for LD Systems CURV 500®, pre-terminated with XLR 5-pin male to XLR 5-pin female for reliable system connections.
The LD Systems MEI 1000 G2 wireless in-ear system offers clean on-stage monitoring and operates on the 823-832 and 863-865 MHz frequency bands.
Got an LD Systems MEI 1000 G2 in-ear monitoring system you want to expand? That's easily done with the LD Systems MEI 1000 G2 BPR extra receiver.
There's not always a need to pick up a second wireless in-ear system if you've already got the LD Systems MEI 1000 G2. The system is easy to expand as needed - for instance by adding this spare MEI 1000 G2 BPR B 5 receiver.
The LD Systems MEI 1000 G2 BPR B 6 is a spare receiver for the LD Systems MEI 1000 G2 in-ear system and operates over the 655 to 679 MHz frequency band.
The Systems MEI 1000 G2 BUNDLE is a complete wireless in-ear pack complete with a transmitter, 2 beltpacks, and 2 sets of in-ears. This system uses frequency bands 823-832MHz and 863-865MHz.
LD Systems MEI 1000 G2 T separate 823 - 832 and 863 - 865 MHz transmitter for LD Systems MEI 1000 G2 in-ear system.
LD Systems MEI 1000 G2 T B 5 separate 584 - 607 MHz transmitter for LD Systems MEI 1000 G2 in-ear system.
LD Systems MEI 1000 G2 T B 6 separate 655 - 679 MHz transmitter for LD Systems MEI 1000 G2 in-ear system.
