Diamond Pedals Vibrato Analogue Bucket Brigade Vibrato Pedal

Voltage	9 V
can be powered by battery	no
Centre positive/negative	centre negative
Power supply plug	barrel 2.1 mm (inner diameter)
adapter included	no

Diamond Pedals Vibrato Analogue Bucket Brigade Vibrato Pedal
Product no: 9000-0127-4443 Bax Music Warranty: This product comes with a 3-year warranty.

General

The original and much bigger Diamond Vibrato was first unleashed back in 2006 and was designed around a simple yet ambitious idea: to create a fully analogue vibrato pedal that boasted pure and accurate pitch and had a renowned MN3007 bucket brigade chip on board. Quickly, the OG stompbox became one of the most sought after modulation pedals the guitar-world had ever seen. Now, nearly two decades later the Diamond Vibrato is back and it's better than ever. This next-gen pedal is the result of years of user feedback, improved technology, maximum efficiency and modern functions, completing a thoughtful redesign that guarantees even better playability alongside the authentic quality of the original model.

The Diamond Vibrato: Organic, Rich & Wavy '70s and '80s Sound

This Diamond pedal delivers the same rich and organic, wavy vibrato and chorus that was first made famous in the seventies and eighties. All of this is made possible by the natural, quickly flowing pitch modulation and the round and vintage sonic character - something that modern stompboxes could only dream of. The internal Compandor circuit adds warmth and complexity to the effect, curbing the dynamics just a touch, while the improved design boosts the clarity, reduces distortion and has been pre-trimmed, so recalibration will never be necessary. The new Diamond Vibrato can be powered using any standard 9 Volt or 18 Volt power supply, so you have the pick of classic and pure vibrato sound with some extra headroom at 18 Volts or even more colour and warble at 9 Volts - bringing the sound close to the output of the original pedal when it was shifted into High Mode.

Smaller But Just as Powerful

While this upgraded pedal now comes in a far more compact box, no compromises have been made when it comes to the power that lies within. The fully analogue signal path, the Compandor and BBD Delay circuits have simply been shrunk down to fit the more pedlboard-friendly housing. By using double stacked PCBs, space isn't just saved, but the audio and power isolation as well as the switching circuits have been massively improved, and all of it comes finished with top-mounted jack ports, soft-touch true bypass switching and overload protection to polish off a solid tool that's set up for any modern live rig.

Tips or comments about this product

Please note: A power supply does not come included with this pedal.

Specifications

Product features

Sustainable product	not specified
Type of modulation effect	vibrato
Mini pedal	no
True bypass	yes
Stereo output	no
Voltage	9 V, 18 V
Can be powered by battery	no
Centre positive/negative	centre negative
Power supply plug	barrel 2.1 mm (inner diameter)
Adapter included	no

Weight and dimensions including packaging

Weight (incl. packaging)	390 gr
Dimensions (incl. packaging)	14,5 x 8,5 x 8,5 cm

Product specifications

Diamond Pedals Delay Pedal
model: Vibrato
colour: purple
effect type: vibrato
soft touch relay-based true bypass switching
sound and character of the original pedal combined with improved modern functions
improved Compandor design for more clarity, reduced distortion and lower noise floor
legendary MN3007 Bucket Brigade Delay chip (original NOS Panasonic BBDs in 1st edition limited run of 800)
variable chorus control for mixing the dry and wet signals
momentary or latching speed doubler (doubles the set vibrato speed)
wide speed range of 0.1 to 20 Hz
controls:
- level
- speed
- chorus
- depth
switches:
- On/Dbl
- jazz
input: 6.35mm mono jack
output: 6.35mm mono jack
power: 9V DC, <18mA power supply (not included)
dimensions: 12.2 x 6.7 x 4cm
weight: 280g
hand built in Montreal, Canada