The Super-Blimp Kit by Rycote is one of the lightest, most compact, most robust wind shields on the market today. What's more, it doubles as a top-notch shock mount!
The Rycote Modular Windshielding System Kits are renowned in the broadcasting and movie industry! The Rycote modular windshield kit 3 consists of the modular suspension, modular windshield and Windjammer.
This kit features all the accessories you need to mount your Sony PCM D50 on a (DV) camera, stand or boom arm, so you can use it - even outdoors - without handling or wind noise tainting your recordings.
The Hot Shoe Extension by Rycote is an indispensable accessory for those who would like to mount a video mic or light on their camera. Fit for 3/8-inch thread.
The Rycote 5cm Super Softie is a very special, practical windshield for shotgun microphones. It isn't made of soft, thin hairs, but of a new material that allows for a transparent, deep sound.
The Rycote 18cm Super Softie is a very special, practical windshield for shotgun microphones. It isn't made of soft, thin hairs, but of a new material that allows for a transparent, deep sound.
Do you need to angling sound for, say, a film production? And are you standing outside in the wind? Give this Rycote Nano Shield Kit some consideration: top quality, and quite a bit less weight than comparable blimps.
No more turning until you weigh an ounce. With the Rycote PCS-Lite 5/8" quick release clamp, you snap your microphones onto your tripod quickly and securely. This quick release has 5/8" threads on both sides.
The Rycote PCS-Stand Base Mini is a foldable microphone stand with a 3/8-inch thread.
The Rycote PCS-Stand Base 3/8'' PCS-U Kit includes a microphone stand base with a foldable design and a PCS-U quick-coupler.
The short Rycote PCS-Sound Stand Mini microphone stand comes fitted with a 3/8" threaded mounting point, is height-adjustable and folds down into a neat package.
The Rycote PCS-Sound Stand 3/8" PCS-U Kit sets you up with a height-adjustable microphone stand that folds down into a neat package and comes included a PCS-U quick-release spigot.
Are you tired of constantly turning your microphones on your tripod or boompole? With Rycote's PCS system, that's a thing of the past. Make all your microphones PCS-ready with these 5/8" screw thread tips.
The Rycote PCS-Utility is a quick release for microphones with a 3/8" thread. You attach the base to a tripod. You attach the supplied tip to your microphone holder. Now it's just a matter of clicking it on.
You can rig microphones safely and quickly with the Rycote PCS-Utility Half Coupler Kit. The PCS-Utility quick coupler attaches to 32-35 mm tubes on speaker and light stands, for example, with the half coupler supplied.
Rig microphones safely and quickly with the Rycote PCS-Utility Half Coupler Kit. You attach the PCS-Utility quick coupler to 48-51 mm trusses with the included half coupler.
The Rycote PCS-Spigot microphone quick release is suitable for all tripod arms and boompoles with a 5/8" spigot. For a quick and safe workflow.
The Rycote Short Fur Softie protects your microphone from wind during outdoor recordings. This Fur Softie is only 7 cm long and is suitable for microphones with a diameter of between 19 and 22 mm.
The Rycote HC-35 is a high-quality condenser directional microphone. Its hypercardioid directional characteristic ensures that it records in a very focused manner.
These two replacement thread adapters for the PCS-Boom connector have a 3/8 thread size, just like the ones on the original. Use these tips to attach your shockmount or windshield to the Boom connector.
The Rycote Classic Adaptor is a connection system to integrate your existing Rycote windshield kit with the PCS-Boom connector. It has a holder for an XLR cable that can rotate 360 degrees.
The Rycote Cyclone Adaptor is a connection system to integrate your existing Rycote Cyclone windshield kit with the PCS-Boom connector. It has a holder for an XLR cable that can rotate 360 degrees.
Out in the open and struggling to get clear recordings with your Sennheiser Memory microphone? Grab the purpose-made Rycote Mini Wind-Jammer and give any gusts of wind no chance to ruin your takes.
This mini windjammer reduces the noise that can come inside the Shure MV88 due to wind gusts. So you can record complete audio tracks undisturbed on the go.
Safely tote up to three small-diaphragm microphones by neatly tucking them up inside the Rycote Mic Protector Case. This fully padded and reinforced case comes including three PVC tubes for extra protection.
With the all-new 3D-Tex design of the Cyclone series, you achieve even better results in terms of wind protection. Assembly and disassembly is also very easy and quick. This type uses the XLR connector.
With Rycote's Cyclone windshield kit, you are extremely flexible. You transform your windshield into a stable suspension in just a few seconds. Rycote offers you the best solution for every situation.
Rycote's updated Cyclone series windshields have been improved in some crucial areas. Most important improvement is the 3D-Tex material. Now even lighter, stronger and with better cushioning properties.
The Rycote Baseball windscreen is designed to prevent noise caused by rapid boom cueing. It's easy to attach and remove and is more effective in wind reduction than most alternatives on the market.
The set of 3 Rycote Baseball windscreens is designed to prevent noise caused by rapid boom cueing. They're easy to attach and remove and are more effective in wind reduction than most alternatives on the market.
The Softie Kit NTG by Rycote is made for the Rode NTG1, NTG2, NTG3, NTG4 and NTG4+ microphones. It offers superior suspension for effective reduction of wind and handling noise.
The Rycote windshield is designed especially for the Sennheiser MKH 416 shotgun microphone and is equipped with the patented Lyre technology.
The Rycote Super-Shield windshield kit is a lightweight solution to preventing wind and other unwanted noises from getting captured. It's suitable for any shotgun microphone between 200 and 250 mm.
The Rycote InVision shock mount is a universal device that's suitable for any large-diaphragm microphone of up to 450 grams and between 55 and 68 mm in diameter.
The Rycote InVision USM VB-L studio kit offers a complete solution for effectively filtering out unwanted background noise. It includes a shock mount and a pop filter and is suitable for all large-diaphragm microphones.
The set of 2 Grey Lavalier Windjammers by Rycote is designed for lavalier microphones worn during interviews. It effectively reduces unwanted sounds caused by wind, clothes rustling or handling noise.
The Rycote Mini Windjammer is custom-made for the Røde VideoMic Pro with Lyre shock mount. It's made of high-quality materials and effectively keeps background and contact noises to a minimum.
Rycote makes professional windshields for effective audio isolation and crystal-clear recordings. The Mini Windjammer is designed especially for the VideoMic by Røde.
The Rycote modular windshield kits are renowned when it comes to windshield technology! This Modular Windshield 2 kit contains everything you need for a complete setup.
The Rycote Windshield System 295 Kit is specifically designed so that you can use the Sennheiser MKH416 in all weather conditions. Includes modular suspension, windshield and Windjammer.
Rycote's Softie windscreen is an industry standard for TV recordings. This slip-on is made of acoustic foam and synthetic fur, and is easy to use.
Rycote´s Softie is a user-friendly slip-on windshield that's made of acoustic foam and synthetic fur. Easily slide it over your mic!
The Furry Lavalier Windjammer by Rycote is specifically designed for lavalier microphones that are worn out of doors. It's a ball of fur with an elastic opening, that fits on nearly any lavalier microphone.
