Discontinued, this product can no longer be ordered.
Not sure if the Samson C02 Condenser Microphone Set + Stands and Cables is for you? Do a Choice Check.
Start Choice Checker
Samson C02 Condenser Microphone Set + Stands and Cables
Product no: 9000-0139-0030
Bax Music Warranty:
Samson C02 Pencil Condenser Microphone, Matched-Pair This product comes with a 3-year warranty.
Samson MK10 Microphone Stand This product comes with a 3-year warranty.
Devine MIC100/10 XLR Microphone/Signal Cable, 10m This product comes with a manufacturing defects warranty.
General
This Samson C02 set consists of 2 Samson C02 small-diaphragm condenser microphones, 2 microphone stands and 2 microphone cables. Make beautiful stereo recordings of instruments and ensembles or use the set for performances. The Samson C02 microphone has a supercardioid directional characteristic. When close miking instruments, this results in excellent isolation. Using the set in a stereo setup results in a lively and wide stereo image.
Specifications
Product features
| Sustainable product |
not specified |
| Microphone sensitivity (dBV/PA) |
-34 |
| Microphone impedance |
200-249 ohms |
| Low-cut filter |
no |
| Maximum SPL |
130 dB - 139 dB |
| Maximum frequency |
20 - 20.9 kHz |
| Microphone accessories |
shock mount, case |
| Minimum frequency |
40 - 49 Hz |
| Pad switch |
no |
| Polar pattern |
super cardioid |
| Stereo |
yes, matched pair |
| Interchangable capsules |
no |
Weight and dimensions including packaging
| Weight (incl. packaging) |
2,0 kg |
| Dimensions (incl. packaging) |
30,0 x 12,0 x 7,7 cm
|
Product specifications
- pencil condenser microphone
- frequency range: 40 Hz - 20 kHz
- super-cardioid pickup pattern
- sensitivity: -40 dBv/Pa
- maximum sound pressure: 134dB SPL
- impedance: 200 Ohm
- dimensions: 150 x 20 mm (HxDiameter)
- weight: 0.17 kg (microphone)
- 48V phantom power
- gold-plated XLR connector
- comes in a solid case, includes two shock-mounted microphone clamps
2x Samson MK10 Microphone Stand
The Samson MK10 has a rugged synthetic tripod with foldable feet provided with rubber knobs. Its height can be adjusted. Boom can also be adjusted.
Product features
| Number of stands |
1 |
| Sustainable product |
not specified |
| Microphone stand weight |
1 - 2 kg |
| Boom arm |
yes |
| Height adjustable |
yes |
| Colour |
black |
| Stand material |
steel |
| Maximum height of stand |
100 to 110 cm |
| Included stand accessories |
microphone clip |
| Mininum stand height |
60 to 70 cm |
| Screw thread size |
3/8 inch |
| Set |
no |
| Construction |
2-part telescopic |
| Type of stand |
short boom stand |
| Type of stand base |
flat base feet |
Weight and dimensions including packaging
| Weight (incl. packaging) |
1,7 kg |
| Dimensions (incl. packaging) |
65,0 x 9,0 x 8,0 cm
|
Product specifications
- microphone stand with boom
- adjustable height
- length and angle adjustable
- foldable feet
- synthetic legs
- delivered with microphone clip
2x Devine MIC100/10 XLR Microphone/Signal Cable, 10m
Close any huge XLR signal-based gap with this 10-metre microphone/signal cable from Devine! Equipped with durable plugs and wrapped up inside fully flexible and protective sheathing, the MIC100/10 ensures solid, reliable signal transfer.
Product features
| (partially) coiled |
no |
| Sustainable product |
not specified |
| Right angled or straight |
straight - straight |
| Colour |
black |
| Length |
10.00 m |
| Set |
no |
| Audio connector |
3-pin XLR |
| Type of vlogging accessory |
cable |
Weight and dimensions including packaging
| Weight (incl. packaging) |
498 gr |
| Dimensions (incl. packaging) |
24,0 x 24,0 x 4,0 cm
|
Product specifications
- XLR male - XLR female
- can be used as a microphone cable or as an all-round signal cable
- supple, rugged cable
- high-grade connectors with locking option
- connectors with pull relief to retain contact integrity
- length: 10m
- filling: cotton
- oxygen-free copper
- isolation diameter: 1.4mm
- isolation colours: red and white
- number of conductors: 2
- inner conductor diameter: 0.226mm²
- conductor dimensions: 20 x 0.12mm
- helical sheathing: 0.12 x 64
- cable diameter: 6mm
- sheathing material: flexible PVC
- operating temperature: -20 - +70°C
- capacity @ 1 kHz:
- cond.-cond.: 131pF/m
- cond.-shield.: 178pF/m