Electro-Voice Everse 12 Tray W accessory mounting plate. By mounting it on top of the Everse 12, it is possible to mount equipment such as a wireless microphone receiver on top of the speaker.
The Electro-Voice WC-58W is a handy cap set that allows you to protect the EVID-5.2 and EVID-8.2 speakers from the rain. Handy when hanging them outside. Available in black.
The Electro-Voice Everse 12 Tray B can be mounted on top of the Everse 12 so that other equipment, like a wireless microphone and receiver can be secured to top of the speaker via the fitted strap.
With this tailor-made Electro-Voice tray, various bits of kit can be mounted onto your Everse 8 speaker and kept close at hand, including an Electro-Voice RE3 or R300 wireless microphone receiver.
Electro-Voice's TC-6W is a cover cap to protect the connectors of EVID 6.2 speakers from water.
This is the official Electro-Voice F.01U.317.470 ZLX-15P PCBA Amplifier SMPS HV ZLX. AXM.
Whether you need a fresh battery pack or a back-up for your Electro-Voice Everse 8, this is it.
The Electro-Voice Everse Bat is a spare battery pack for the standard battery of the Everse 8. Grab it if you need a replacement or a back-up battery.
The Electro-Voice F.01U.345.948 is a 12-inch woofer spare part. This is a woofer that is a standard part of the Evolve 50 speaker column system.
Suitable for various drivers, including the 81498, 89588, 89858, 81514, DH2001, DH2005, DH2010A and DH3.
The Electro-Voice WC-58W is a handy cap set that allows you to protect the EVID-5.2 and EVID-8.2 speakers from the rain. Handy when hanging them outside. Available in white.
As Electro-Voice say, the EVM12L Classic is the best guitar speaker in the world. Built to last and made for lead guitarists, this 12-inch model has an RMS power capacity of 200 Watts at 8 Ohms.
Electro-Voice replacement input panel for the EVID-S10.1D 10-inch subwoofer. Possesses a stereo/mono switch, 4 Ohm/8 Ohm switch. It has a Euroblock Full-Range input and a High-Pass output. Executed in black.
Electro-Voice replacement input panel for the EVID-S10.1D 10-inch subwoofer. Possesses a stereo/mono switch, 4 Ohm/8 Ohm switch. It has a Euroblock Full-Range input and a High-Pass output. Executed in white.
A sleek 8-inch woofer from the well-known brand, Electro Voice. Use this woofer in your DIY projects or as a spare part for a ZX1 woofer.
The Electro-Voice SPA PCBA Amplifier ELX200-12/18SP v2 is a replacement amplifier module for ELX200 series subwoofers. Suitable for the ELX200-12SP and the ELX200-18SP.
Electro-Voice SPP Amplifier Knob Red ELX A. This is a spare knob that allows you to adjust the volume of your ELX active speaker.
Electro-Voice F.01U.303.731 Control/Master Volume Knob spare part for ZLX Series
Electro-Voice SMX2151 15-inch woofer for TX1152. This is a spare part.
The TC-ZX allows you to modify your Electro-Voice ZX1i speakers to be even more weather-resistant.
The TC-ZXW lets you modify your Electro-Voice ZX1i speakers to be even more weather-resistant.
The TC-4B is a cover for the connectors of Electro-Voice's EVID 4.2 loudspeaker.
The TC-4W is a cover for the connectors of Electro-Voice's EVID 4.2 loudspeaker.
Electro-Voice's TC-6B is a cover cap to protect the connectors of EVID 6.2 speakers from water.
Electro-Voice's WC-PB is a cover for the connectors of the P6.2 pendant speaker from Electro-Voice's EVID series.
Electro-Voice's WC-PW is a cover for the connectors of the P6.2 pendant speaker from Electro-Voice's EVID series.
This knob is a spare part for the Electro=Voice ELX200-10P loudspeaker. The knob in question is the Master Volume knob.
Should the grille of your Electro-Voice ETX-18SP become damaged, you can replace it with this spare part.
Filters
Filters