Devine Onyx 2.2 speaker set 10A + 12SA

Devine Onyx 2.2 speaker set 10A + 12SA
Product no: 9000-0042-0219 Bax Music Warranty: Devine Onyx 12SA 12-inch Active Subwoofer This product comes with a 3-year warranty. Devine MIC100/10 XLR Microphone/Signal Cable, 10m This product comes with a manufacturing defects warranty. Innox IVA07 M20 M20 Distance Rod This product comes with a 3-year warranty. Devine Onyx 10A 10" Active Full-Range Speaker This product comes with a 3-year warranty.

General

Get your live performance off to a flying start with the Devine Onyx 2.2 speaker set! It consists of two 10-inch Onyx speakers and two 12-inch subwoofers for a total peak output capacity of 5,360 watts! It also includes distance rods and XLR cables to you can connect it up to your sound system right away. This is an active set of compact, manageable speakers that offer a very balanced sound.

Specifications

2x Devine Onyx 12SA 12-inch Active Subwoofer
The Devine Onyx 12SA is an active, compact subwoofer engineered to add fat dose of low-end to your sound system. Outfitted with a 12" woofer, this bold bass bin boasts a 450W RMS power capacity and various connection options.

Product features

Sustainable product	not specified
Mid driver/woofer diameter	12 inches
RMS power in watts	350 - 499 W
Minimum frequency	40 - 49 Hz
Maximum SPL	120 dB - 129 dB
Weight per speaker	24 kg
Speaker connections	XLR input, out / link / thru
Maximum subwoofer frequency	150 Hz
Locking speaker connectors	no

Weight and dimensions including packaging

Weight (incl. packaging)	32,8 kg
Dimensions (incl. packaging)	62,0 x 56,0 x 51,5 cm

Product specifications

Devine Onyx 12SA active subwoofer
Bass Reflex speaker
frequency response: 40 Hz - 150 Hz
max. SPL: 120 dB
crossover: 80/120 Hz (24 dB/Octave)
LF woofer: 12" (with 3" voice coil)
amplifier:
- Class-D
- RMS power: 450W
- peak capacity: 1800W
internal protection: overload, overheat, RMS
connections:
- XLR L + R line inputs (balanced)
- XLR L + R outputs (balanced, filtered)
- XLR L+ R Link outputs (balanced)
controls:
- Sub Level control
- crossover switch: 80 Hz – 120 Hz
- Phase: 0° - 180°
- Shape
- Ground Lift On/Off
LEDs: Power On, Signal/Limit
housing:
- multiplex birch wood
- finish: black
- grille: 1.5mm metal
- handles: two integrated handles, one on each side
- distance rod flange: M20
dimensions: 495 x 590 x 540mm
weight: 23.5 kg

4x Devine MIC100/10 XLR Microphone/Signal Cable, 10m
Close any huge XLR signal-based gap with this 10-metre microphone/signal cable from Devine! Equipped with durable plugs and wrapped up inside fully flexible and protective sheathing, the MIC100/10 ensures solid, reliable signal transfer.

Product features

(partially) coiled	no
Sustainable product	not specified
Right angled or straight	straight - straight
Colour	black
Length	10.00 m
Set	no
Audio connector	3-pin XLR
Type of vlogging accessory	cable

Weight and dimensions including packaging

Weight (incl. packaging)	498 gr
Dimensions (incl. packaging)	24,0 x 24,0 x 4,0 cm

Product specifications

XLR male - XLR female
can be used as a microphone cable or as an all-round signal cable
supple, rugged cable
high-grade connectors with locking option
connectors with pull relief to retain contact integrity
length: 10m
filling: cotton
oxygen-free copper
isolation diameter: 1.4mm
isolation colours: red and white
number of conductors: 2
inner conductor diameter: 0.226mm²
conductor dimensions: 20 x 0.12mm
helical sheathing: 0.12 x 64
cable diameter: 6mm
sheathing material: flexible PVC
operating temperature: -20 - +70°C
capacity @ 1 kHz:
- cond.-cond.: 131pF/m
- cond.-shield.: 178pF/m

2x Innox IVA07 M20 M20 Distance Rod
The Innox IVA07 M20 distance rod is designed to suspend a full-range speaker in the optimum position. Height adjustable, this rod is compatible with a speaker or subwoofer of any size.

Product features

Sustainable product	not specified
Speaker pole mount	M20 screw thread
Height adjustable	yes
Distance rod weight capacity	20 -29 kg
Set	no
Maximum height of stand	140 to 150 cm

Weight and dimensions including packaging

Weight (incl. packaging)	1,7 kg
Dimensions (incl. packaging)	76,0 x 9,0 x 9,0 cm

Product specifications

distance rod
material: steel
max. load capacity: 50kg
screwthread: M20
top side: 35mm tube
height: 800 - 1340mm (adjustable)
equipped with safety pin and knob for securing speakers
material: steel
colour: black
interior dimensions: 9 x 9 x 83cm
weight: 2kg

2x Devine Onyx 10A 10" Active Full-Range Speaker
The Devine Onyx 10A is a compact, bi-amped full-range speaker that comes packed with a fistful of different inputs to guarantee eased integration into any set-up.

Product features

Number of stereo AUX inputs	1
Playback options	none
Bluetooth	no
Mid driver/woofer diameter	10 inches
Tweeter diameter	1.35 inches
DSP	no DSP
Sustainable product	not specified
Suitable as monitor	yes
Weight per speaker	12 kg
Total guitar/bass inputs	none
Total line inputs	2
Total microphone inputs	2
Built-in equaliser	yes
Speaker cabinet material	plastic
Maximum SPL	130 dB - 139 dB
Maximum frequency	19 - 19.9 kHz
Minimum frequency	50 - 59 Hz
Mounting points	35mm stand flange
RMS power in watts	200 - 349 W
Analogue audio input type	unbalanced line in (RCA), unbalanced stereo line in (TRS mini-jack), balanced line in (TRS jack), balanced line in (XLR), microphone input (XLR)
Analogue audio output type	balanced mix out (XLR)
Passive speaker output	no

Weight and dimensions including packaging

Weight (incl. packaging)	12,8 kg
Dimensions (incl. packaging)	58,5 x 38,0 x 37,5 cm

Product specifications

Devine Onyx 10A full-range speaker
bi-amped
also works as floor monitor
with rubber feet
fitted with handle
frequency response: 58 Hz - 19 kHz
amplifiers: Class-D + Class-AB
sensitivity: 93dB
max. SPL: 132 dB
drivers:
- HF compression driver:
  - diameter: 1.35" (1" throat exit)
  - sensitivity: 101 dB
  - dispersion angle: 90 x 60°
  - crossover frequency: 3.2 kHz (24dB per octave)
- LF woofer:
  - diameter: 10" (2" voice coil)
  - crossover: 3.2 kHz
power capacity:
- RMS: 220W
- peak: 880W
connections:
- 2x XLR input
- 1x TRS jack input
- 1x RCA input
- 1x mini-jack AUX input
- 1x XLR master output
housing material: polypropylene
grille: 1.3mm steel
rigging points: 4x M8
distance rod flange: standard 35mm
dimensions: 357 x 593 x 365mm
weight: 11.5 kg

Write a review

Elliot Goodbody December 19, 2024

Wrote the following about Innox IVA07 M20 M20 Distance Rod

The plastic part falls out too easily when the top pole is pulled out rendering the fastener unable to tighten. Simple design fault, but they are cheap.

Gad July 17, 2024

Wrote the following about Devine MIC100/10 XLR Microphone/Signal Cable, 10m

Good quality, Customer service was very good and delivered within 3 days.
Thanks to bax music

Ash April 23, 2020

Wrote the following about Devine MIC100/10 XLR Microphone/Signal Cable, 10m

The package was sent promptly, arrived on time. I've been using this mic with the Beringer deq2496 also purchased from Bax music and it's working very well. Customer service was very good when I called to modify my order.

Reviews from other countries

Translate all reviews into English View original reviews

Phala May 13, 2026

Wrote the following about Devine Onyx 12SA 12-inch Active Subwoofer

Matériel commandé dimanche, livré mercredi, délai de livraison court et respecté 👍. J'ai eu quelques craintes concernant la société de transport DBchenker( avis vraiment très défavorable) mais tout s'est bien passé pour moi.
Baxmusic est au top ! Colis de 26 kg livré sur palette emballé dans du film plastique pour éviter que le carton ne prenne l'eau . Le caisson de basse est protégé dans 3 cartons épais. C'est du sérieux 👍.
Concernant le produit en lui-même le oxyx 12SA 1200w, le son est bien , je le trouve un peu faible mais très bon rapport/ qualité prix. Peut-être pour un peu plus de puissance, se tourner vers le 15SA ( utilisation dans un salon pour du chant).
Je ne connaissais pas la marque Devine mais ça à l'air pas mal
Franchement bravo BaxMusic! Pas déçu de ma première commande.

Casper kooij March 10, 2026

Wrote the following about Devine Onyx 10A 10" Active Full-Range Speaker

Ik ben zeer onder de indruk van deze speaker de geluidsdruk is zeer hoog mooi warm geluid tuurlijk het kan altijd beter maar dan moet je ook diep in de buidel tasten
Klasse product

Zorik de groote December 29, 2025

Wrote the following about Innox IVA07 M20 M20 Distance Rod

Past perfect zeer goede schroefdraad echt stevig bevestigd, zeker waard voor deze prijs!

Zorik de groote December 29, 2025

Wrote the following about Devine Onyx 12SA 12-inch Active Subwoofer

Zeer goede woofer heel stevig. Hij gaat zeer luid en de bass is zeer krachtig alleen moet je wel opletten dat hij niet te hard staat anders kan je hem denk ik erdoor blazen, heb dit zelf nog niet voor gehad maar ben ook zeer voorzichtig.
Zeker het waard voor de prijs dit is de 2de die ik koop echt aanrader

Tino December 22, 2025

Wrote the following about Devine Onyx 10A 10" Active Full-Range Speaker

Suenan de lujo recomendado 100x100

Fred November 19, 2025

Wrote the following about Devine Onyx 10A 10" Active Full-Range Speaker

We zochten een paar mooie luidsprekers voor mijn zoon ,na een Prima advies van een medewerker van bax erg vriendelijk en duidelijk deze aangeschaft, zeer tevreden en mooi en een strak geluid .zeer tevreden!!!

Rob van Schaik September 18, 2025

Wrote the following about Devine MIC100/10 XLR Microphone/Signal Cable, 10m

Goede microfoon kabels!!!

Show all 304 reviews

Description	Type	Language
Devine MIC100/10 Declaration of Conformity	Manual	Unknown
Devine_Onyx_user_manual_EN	Manual	English
Devine_Onyx_user_manual_NL	Manual	Dutch, English
Devine_Onyx_sub_user_manual_NL	Manual	Dutch, English
Devine_Onyx_sub_user_manual_EN	Manual	English