Bax Advised Electric Guitar Mellow Star recording kit

4.7 / 5

Specifications

1x SE Electronics VR1 Voodoo ribbon studio microphone

With the Voodoo Ribbon, sE Electronics are ushering in a new age! The VR1 is a microphone with a frequency range of 20 Hz to 20 kHz, which is exceptionally high for a ribbon.

Product features

Sustainable product: Not specified
Microphone sensitivity (dBV/PA): -55
Microphone impedance: 300-349 ohms
Maximum SPL: 130 dB - 139 dB
Maximum frequency: 18 - 18.9 kHz
Microphone accessories: Shock mount, case
Minimum frequency: 30 - 34 Hz
Type of ribbon microphone: Passive

Weight and dimensions including packaging

Weight: 980 gr
Dimensions: 35,5 x 12,5 x 9,5 cm

Product specifications

full-range ribbon microphone
full frequency range
microphone principle: pressure gradient
patented mechanic filtering technology - diagram 2μ: aluminium ribbon
frequency range: 20 Hz - 18 kHz
sensitivity: 1.6 mV/Pa -56 ± 1.5dB
pickup pattern: figure 8
impedance ≤ 300 Ohms
signal/noise ratio: 17 dB
delivered with shockmount in a wooden case
can effortlessly be connected to preamps with phantom power

1x Innox IVA 19 Guitar Amplifier Microphone Clamp

This clamp-on microphone stand is simply mounted onto a guitar amp, leaving you with an easily positioned microphone and a neat and clean on-stage set-up.

Product features

Sustainable product: Not specified
Holder / clamp for specific model: No
Screw thread size: 3/8 inch, 5/8 inch
Type of mic holder, clip or clamp: Guitar cabinet microphone arm

Weight and dimensions including packaging

Weight: 1,0 kg
Dimensions: 31,5 x 9,0 x 7,5 cm

Product specifications

guitar amplifier microphone clamp
can be easily clamped onto the side of a guitar amp
adjustable clamp: 22 to 35cm
screw thread: 5/8-inch
cable ties included
coated clamp contact points to protect amp

1x Klotz M1FM1N0300 M1 Prime Microphone Cable with Neutrik Plugs, 3m

The Klotz M1FM1N0300 Neutrik XLR 3-pole – XLR 3-pole microphone cable 3 metres makes life easy for you. The extremely reliable Neutrik XLR-connectors are very precise.

Product features

Sustainable product: Not specified
Audio connector: 3-pin XLR
Length: 3.00 m
Colour: Black
Set: No
(partially) coiled: No
Right angled or straight: Straight - straight

Weight and dimensions including packaging

Weight: 150 gr
Dimensions: 25,0 x 20,0 x 3,0 cm

Product specifications

- cable type: Klotz professional microphone cable
- connector type: Neutrik
- durable and precise microphone cable
- cable length: 3m
- colour: black
- conductor gauge: 0.22 mm2
- connector: XLR female – XLR male

1x Motu Ultralite MK4

The Motu Ultralite MK4 audio interface is an audio-technical jack of all trades! It boasts 40 simultaneous audio channels, both analogue and digital!

Product features

19 inches: No
Computer ports: USB
Total microphone inputs: 2
Maximum sample rate: 192 kHz
Included software: MOTU AudioDesk
Software included: Yes, download

Weight and dimensions including packaging

Weight: 2,2 kg
Dimensions: 38,0 x 29,5 x 14,0 cm

Product specifications

Motu Ultralite MK4
audio interface
inputs:
- 2x combo XLR/TRS
- 6x analogue inputs (jack)
- 1x ADAT (8x channels)
- 1x S/PDIF (2x channels)
outputs:
- 10x analogue outputs (jack)
- 1x ADAT (8x channels)
- 1x S/PDIF (2x channels)
- 1x headphone jack (2x channels)
computer channels via USB: 24, 32 or 64 channels
MIDI I/O
phantom power supply
128 x 48 px display
built-in 48-channel mixer with effects
latency: 1.83 ms
included or free software available:
- MOTU Discovery App (Mac, PC)
- MOTU Discovery App (iOS, in the App Store)
- MOTU Control web app (in the hardware)
- AudioDesk 4.0 (Mac, Windows, separate download)
system requirements
- Mac:
  - CPU: 1 GHz intel
  - Mac OSX 10.8
- PC:
  - CPU: 1 GHz Pentium
  - Windows 7, 8, 10
- both:
  - system memory capacity: 2 GB (4 GB or more recommended)
  - USB 2.0 or USB 3.0 connection
  - +/- 500GB free disc space recommended for recording
OS for web control app: Mac, Windows, Linux, iOS, Android
robust aluminium housing
size: half-rack
includes brackets for mounting two similar MOTU modules in a 19-inch rack

1x Audio Technica ATH-M50x Studio Headphones

Praised by producers and DJs the world over, the Audio Technica ATH-M50 has been extremely successful. Now, this popular pair of headphones is available in the fresh, upgraded form of the ATH-M50x.

Product features

Active noise suppression: No
Wireless: No
Rotatable earpad: Yes
Headphone construction: Closed
Headphone impedance: 30-39 ohms
In/on/over ear: Over-ear
Includes microphone: No
Design can be folded/dismantled: Yes
Removable cable: Yes
Cable length: 250-299 cm
Colour: Black
Volume control: No

Weight and dimensions including packaging

Weight: 695 gr
Dimensions: 30,0 x 21,0 x 12,5 cm

Product specifications

Audio Technica ATH-M50x studio headphones
perfect for monitoring
design:
- over-ear design
- foldable
- closed
technical information:
- driver diameter: 45mm
- magnet type: neodymium
- frequency response: 15Hz - 28kHz
- max. input capacity: 1600 mW
- sensitivity: 99dB
- impedance: 38 Ohms
cables:
- connection: mini jack, gold-plated
- includes professional mini jack to jack adapter and storage pouch
- three detachable cables included:
  - 1.2-3m coiled cable
  - 3m straight cable
  - 1.2m straight cable
weight (cable not included): 285 g

Specifications

1x SE Electronics VR1 Voodoo ribbon studio microphone

With the Voodoo Ribbon, sE Electronics are ushering in a new age! The VR1 is a microphone with a frequency range of 20 Hz to 20 kHz, which is exceptionally high for a ribbon.

Product features

Sustainable product: Not specified
Microphone sensitivity (dBV/PA): -55
Microphone impedance: 300-349 ohms
Maximum SPL: 130 dB - 139 dB
Maximum frequency: 18 - 18.9 kHz
Microphone accessories: Shock mount, case
Minimum frequency: 30 - 34 Hz
Type of ribbon microphone: Passive

Weight and dimensions including packaging

Weight: 980 gr
Dimensions: 35,5 x 12,5 x 9,5 cm

Product specifications

full-range ribbon microphone
full frequency range
microphone principle: pressure gradient
patented mechanic filtering technology - diagram 2μ: aluminium ribbon
frequency range: 20 Hz - 18 kHz
sensitivity: 1.6 mV/Pa -56 ± 1.5dB
pickup pattern: figure 8
impedance ≤ 300 Ohms
signal/noise ratio: 17 dB
delivered with shockmount in a wooden case
can effortlessly be connected to preamps with phantom power

1x Innox IVA 19 Guitar Amplifier Microphone Clamp

This clamp-on microphone stand is simply mounted onto a guitar amp, leaving you with an easily positioned microphone and a neat and clean on-stage set-up.

Product features

Sustainable product: Not specified
Holder / clamp for specific model: No
Screw thread size: 3/8 inch, 5/8 inch
Type of mic holder, clip or clamp: Guitar cabinet microphone arm

Weight and dimensions including packaging

Weight: 1,0 kg
Dimensions: 31,5 x 9,0 x 7,5 cm

Product specifications

guitar amplifier microphone clamp
can be easily clamped onto the side of a guitar amp
adjustable clamp: 22 to 35cm
screw thread: 5/8-inch
cable ties included
coated clamp contact points to protect amp

1x Klotz M1FM1N0300 M1 Prime Microphone Cable with Neutrik Plugs, 3m

The Klotz M1FM1N0300 Neutrik XLR 3-pole – XLR 3-pole microphone cable 3 metres makes life easy for you. The extremely reliable Neutrik XLR-connectors are very precise.

Product features

Sustainable product: Not specified
Audio connector: 3-pin XLR
Length: 3.00 m
Colour: Black
Set: No
(partially) coiled: No
Right angled or straight: Straight - straight

Weight and dimensions including packaging

Weight: 150 gr
Dimensions: 25,0 x 20,0 x 3,0 cm

Product specifications

1x Motu Ultralite MK4

The Motu Ultralite MK4 audio interface is an audio-technical jack of all trades! It boasts 40 simultaneous audio channels, both analogue and digital!

Product features

19 inches: No
Computer ports: USB
Total microphone inputs: 2
Maximum sample rate: 192 kHz
Included software: MOTU AudioDesk
Software included: Yes, download

Weight and dimensions including packaging

Weight: 2,2 kg
Dimensions: 38,0 x 29,5 x 14,0 cm

Product specifications

Motu Ultralite MK4
audio interface
inputs:
- 2x combo XLR/TRS
- 6x analogue inputs (jack)
- 1x ADAT (8x channels)
- 1x S/PDIF (2x channels)
outputs:
- 10x analogue outputs (jack)
- 1x ADAT (8x channels)
- 1x S/PDIF (2x channels)
- 1x headphone jack (2x channels)
computer channels via USB: 24, 32 or 64 channels
MIDI I/O
phantom power supply
128 x 48 px display
built-in 48-channel mixer with effects
latency: 1.83 ms
included or free software available:
- MOTU Discovery App (Mac, PC)
- MOTU Discovery App (iOS, in the App Store)
- MOTU Control web app (in the hardware)
- AudioDesk 4.0 (Mac, Windows, separate download)
system requirements
- Mac:
  - CPU: 1 GHz intel
  - Mac OSX 10.8
- PC:
  - CPU: 1 GHz Pentium
  - Windows 7, 8, 10
- both:
  - system memory capacity: 2 GB (4 GB or more recommended)
  - USB 2.0 or USB 3.0 connection
  - +/- 500GB free disc space recommended for recording
OS for web control app: Mac, Windows, Linux, iOS, Android
robust aluminium housing
size: half-rack
includes brackets for mounting two similar MOTU modules in a 19-inch rack

1x Audio Technica ATH-M50x Studio Headphones

Praised by producers and DJs the world over, the Audio Technica ATH-M50 has been extremely successful. Now, this popular pair of headphones is available in the fresh, upgraded form of the ATH-M50x.

Product features

Active noise suppression: No
Wireless: No
Rotatable earpad: Yes
Headphone construction: Closed
Headphone impedance: 30-39 ohms
In/on/over ear: Over-ear
Includes microphone: No
Design can be folded/dismantled: Yes
Removable cable: Yes
Cable length: 250-299 cm
Colour: Black
Volume control: No

Weight and dimensions including packaging

Weight: 695 gr
Dimensions: 30,0 x 21,0 x 12,5 cm

Product specifications

Audio Technica ATH-M50x studio headphones
perfect for monitoring
design:
- over-ear design
- foldable
- closed
technical information:
- driver diameter: 45mm
- magnet type: neodymium
- frequency response: 15Hz - 28kHz
- max. input capacity: 1600 mW
- sensitivity: 99dB
- impedance: 38 Ohms
cables:
- connection: mini jack, gold-plated
- includes professional mini jack to jack adapter and storage pouch
- three detachable cables included:
  - 1.2-3m coiled cable
  - 3m straight cable
  - 1.2m straight cable
weight (cable not included): 285 g

Service promise

SE Electronics VR1 Voodoo ribbon studio microphone This product comes with a 3-year warranty.

This product comes with a 3-year warranty.

Innox IVA 19 Guitar Amplifier Microphone Clamp This product comes with a 3-year warranty.

This product comes with a 3-year warranty.

Klotz M1FM1N0300 M1 Prime Microphone Cable with Neutrik Plugs, 3m This product comes with a lifetime manufacturing defects warranty.

This product comes with a lifetime manufacturing defects warranty.

Motu Ultralite MK4 This product comes with a 3-year warranty.

This product comes with a 3-year warranty.

Audio Technica ATH-M50x Studio Headphones This product comes with a 3-year warranty, the styluses come with a manufacturing defects warranty.

This product comes with a 3-year warranty, the styluses come with a manufacturing defects warranty.

Reviews (156)

4.7

156 reviews

Rating

5 stars 121 4 stars 28 3 stars 6 2 stars 1 1 star 0

A review can no longer be written about this item

5 / 5

Innox IVA 19 Guitar Amplifier Microphone Clamp

Super little bit of kit. I had done a fair bit of searching for something like this and most similar devices were twice the price and still had reviews that were fairly mixed. Most similar stuff seems to struggle being solid and dependable, but this clamp when attached is going nowhere. Honestly for this price I firmly believe the Innox is the one to get.

April 23, 2024 | Dom S

5 / 5

Innox IVA 19 Guitar Amplifier Microphone Clamp

If you have a good amp/speaker - none of this modelling stuff, get yourself an SM57 and an Innox IVA 19 Guitar Amplifier Microphone Clamp. So easy to set up and use. This little piece of gear has transformed my routine and I would not be without it. Slips neatly into my leads box. Love it. Great service and value from BAX Music as always!!

August 11, 2022 | Larry Lowe

5 / 5

Innox IVA 19 Guitar Amplifier Microphone Clamp

The Innox IVA 19 guitar amplifier microphone clamp is very strong and will not move once attached to the speaker cabinet, however badly that cabinet vibrates. I prefer this clamp to the "gooseneck" clamps becauseit is so strong and sturdy it should be able to hold a 25lb microphone if such a thing exists whilst being as easy to position as a "gooseneck". In that sense it will happly hold microphone vibration isolation holders, although I have not found this to be necessary. Speaker cabinet clamps obviously save stage floor real estate and they don't move due to accidental knocks like floor stands.

April 29, 2017 | Nigel H.

5 / 5

Innox IVA 19 Guitar Amplifier Microphone Clamp

WExcellent product, well made, fully adjustable, solid strong clamp, positions microphone accurately, but doesn't get in the way.

Very prompt delivery, good price. What else is there to say?

January 19, 2016 | Robert S.

Reviews from other countries

5 / 5