Based on more than 21,240 customer reviews

Penn Elcom Flight Cases & Flight Bags

(498)
Sort by:
Filters

Price range

(£0.00 - £1,000.00)

Type of Deal

  • 5 B-Stock
  • 80 Deals

Stock

  • 268 In stock online

Brand

Show more Show less

Condition

  • 493 New
  • 5 B-stock

Categories

Sustainable product

  • 498 not specified
Product specialists
Our specialists will give you the best possible service and are happy to offer excellent professional advice!
  • Rick Rick
  • Maarten Maarten
Special offers

Penn Elcom L904/914Z Recessed Butterfly Latch, Small

This Penn Elcom designed butterfly latch is made of steel and features a zinc finish. Lockable with tie-wraps, this recessed latch can be used to finish a flight case.

In stock at supplier
In stock at supplier
Order before 10pm = in about 10 working days at home
Recommended price £12.20
£10.40

Penn Elcom Polybloc 60mm (120 x 200cm)

Pad out your flight case or rack with a protective layer of foam using this customisable sheet of Penn Elcom Polybloc foam.

In stock at supplier
In stock at supplier
Order before 10pm = in about 10 working days at home
Recommended price £174
£115

Penn Elcom Polybloc 20 mm (120 x 200 cm)

This Polybloc by Penn Elcom measures 120 x 200 cm and is 20 mm thick. It's perfect for using as the interior panelling on a flight case to keep the contents safe from bumps and shocks.

In stock at supplier
In stock at supplier
Order before 10pm = in about 10 working days at home
Recommended price £64
£44

Penn Elcom R1291k/2L Sliding Rack Drawer/Shelf (1U)

Equipped with two slam locks, the Penn Elcom R1291k/2L can be mounted as a sliding rack drawer or flipped upside down and installed as a shelf - a flexible addition to any 19-inch rack.

In stock at supplier
In stock at supplier
Order before 10pm = in about 10 working days at home
Recommended price £87
£67

Penn Elcom C1339/30z 1.8mm 30/30 R2 Ball-Corner (Zinc)

Designed to meet professional standards, this Penn Elcom ball corner has a 30/30mm recess, a 2.5mm internal radius and a three-leg construction, each pre-drilled with two mounting holes.

In stock at supplier
In stock at supplier
Order before 10pm = in about 10 working days at home
Recommended price £3.33
£2.85

Penn Elcom R1194/1Uk-180 180mm Deep 1U Rack Shelf

Compatible with any 19 inch rack, this ultra-strong Penn Elcom shelf is 1U high, 180mm deep, and comes finished with a rear lip to keep your gear and accessories in place.

In stock at supplier
In stock at supplier
Order before 10pm = in about 10 working days at home
Recommended price £39
£19.95

Penn Elcom rubber foot 25 x 15 mm steel ring

Get a grip with this heavy-duty rubber foot. It's 15 mm thick., easy to mount and comes with a 5mm steel washer.

In stock at supplier
In stock at supplier
Order before 10pm = in about 10 working days at home
Recommended price £1.69
£0.81

Penn Elcom D0593z build-in lid stay small

Thanks tot his lid stay the lid of your flight case will stay open but not fall backwards. This way, it’s easy to close your flight case again after using it.

In stock at supplier
In stock at supplier
Order before 10pm = in about 10 working days at home
Recommended price £6.50
£5.55

Penn Elcom E2215 U-Shaped Trim

The Penn Elcom E2215 U-shape extrusion is made of aluminium and is compatible with 9mm (3/8") thick boards, making it the ideal finishing touch for any self-built DJ furniture.

In stock at supplier
In stock at supplier
Order before 10pm = in about 10 working days at home
Recommended price £11.40
£5.45

Penn Elcom AAY0327 Internal Mounting Point

A handy addition when building custom flight cases or rack installations, the Penn Elcom AAY0327 internal mounting point is made from zinc-finished steel and punched with a pre-threaded M10 hole.

In stock at supplier
In stock at supplier
Order before 10pm = in about 10 working days at home
Recommended price £5.40
£3.42

Penn Elcom W0964z recess castor dish, small

This small stacking dish from Penn Elcom makes stacking flight cases a lot easier. This is because the wheels of the top case are placed in the saucer, preventing them from rolling out.

In stock at supplier
In stock at supplier
Order before 10pm = in about 10 working days at home
Recommended price £4.78
£4.06

Penn Elcom B1630z 6.7mm Panel Divider

The Penn Elcom B1630z bracket can be used to install a 6.7mm panel to serve as an interior divider. Made from 1.2mm-thick steel and pre-drilled with 5.2mm mounting holes, this is a solid finisher for any self-build flight case.

In stock at supplier
In stock at supplier
Order before 10pm = in about 10 working days at home
Recommended price £3.19
£2.73

Penn Elcom amplifier rack support 305mm for 6145 (set of 2)

Give your valuable equipment a secure hold in your flush-mounting project with Penn Elcom amplifier support 305mm for 6145 (set of 2). This set of 2 supports is easy to mount.

In stock at supplier
In stock at supplier
Order before 10pm = in about 10 working days at home
Recommended price £13.15
£6.30

Penn Elcom C0697z flat corner 54mm R2

This rugged flat corner fits any 30 x 30 mm angle extrusion.

In stock at supplier
In stock at supplier
Order before 10pm = in about 10 working days at home
Recommended price £3.09
£2.65

Penn Elcom B1121k 4-Hole Brace (31.2 x 40mm)

This Penn Elcom-made brace features four pre-drilled mounting holes and has been made of 1.2mm steel. The corners are rounded and the whole thing measures 31.2mm by 40mm.

In stock at supplier
In stock at supplier
Order before 10pm = in about 10 working days at home
Recommended price £1.75
£1.49

Penn Elcom D2115k Tour Label Dish (Black)

When it comes to touring, preparation and organisation are key. As such, it's never a bad idea to furnish your flight case with this tour label dish from Penn Elcom so you always know exactly what's (supposed to be) inside.

In stock at supplier
In stock at supplier
Order before 10pm = in about 10 working days at home
Recommended price £16.45
£6.35

Penn Elcom D2116k Black Tour Label Dish, 21 x 15cm

When it comes to touring, preparation and organisation are key. As such, it's never a bad idea to furnish your flight case with this tour label dish from Penn Elcom so you always know exactly what's (supposed to be) inside.

In stock at supplier
In stock at supplier
Order before 10pm = in about 10 working days at home
Recommended price £18.15
£7.85

Penn Elcom D2101/04z Perforated Ventilation Dish (Zinc)

Prevent any rack-mounted gear from overheating simply by installing this smart ventilation dish. Made from steel, this recessed dish has been perforated to aid airflow.

In stock at supplier
In stock at supplier
Order before 10pm = in about 10 working days at home
Recommended price £7.30
£5.50

Penn Elcom R2410k Drawer slides 250 mm (pair)

You obviously can't build drawers into your rack without drawer slides. These from Penn Elcom are made of sturdy steel with a total load capacity of 45 kilos and you slide them out to a total length of 502 millimetres.

In stock at supplier
In stock at supplier
Order before 10pm = in about 10 working days at home
Recommended price £10.50
£7.45

Penn Elcom C1351k 50mm 30/30 R2 Ball-Corner (Black)

Made from solid steel and featuring recesses for 30mm profiles for a flush finish, this Penn Elcom ball-corner can be installed to protect a hard-working flight case and its contents.

In stock at supplier
In stock at supplier
Order before 10pm = in about 10 working days at home
Recommended price £4.94
£2.04

Penn Elcom C1351z Large Ball Corner (30mm Offset)

Made from solid steel and featuring recesses for 30mm profiles for a flush finish, this Penn Elcom ball-corner can be installed to protect a hard-working flight case and its contents.

In stock at supplier
In stock at supplier
Order before 10pm = in about 10 working days at home
Recommended price £2.78
£2.38

Penn Elcom C1346z Brace Ball Corner

Designed by Penn Elcom, this brace-and-ball-corner in one is made of steel and comes with a 30mm offset on one leg only, making it a solid piece of hardware for lidmaker extrusions.

In stock at supplier
In stock at supplier
Order before 10pm = in about 10 working days at home
Recommended price £3.11
£2.39

Penn Elcom C1377/30z Large Ball Corner

A secure finisher for any heavier self-build flight case, this Penn Elcom ball corner has a 5mm internal radius, is made from 1.8mm-thick steel and has a 30mm offset.

In stock at supplier
In stock at supplier
Order before 10pm = in about 10 working days at home
Recommended price £3.56
£3.53

Penn Elcom C1375z Large Heavy-Duty Ball Corner

Made of 2mm-thick steel, this Penn Elcom-made ball corner offers solid protection against bumps and knocks. It has a 3mm internal radius and comes with six 5mm pre-drilling mounting holes.

In stock at supplier
In stock at supplier
Order before 10pm = in about 10 working days at home
Recommended price £3.38
£2.66

Penn Elcom H1009 handle strap with plastic fixings, black

This handle from Penn Elcom is a straphandle and is made of plastic with steel ends, over which plastic caps are placed.

In stock at supplier
In stock at supplier
Order before 10pm = in about 10 working days at home
Recommended price £4.80
£2.83

Penn Elcom W2060z 64mm Castor Wheel (Zinc)

Thanks to pre-drilled mounting holes, this zinc-plated Penn Elcom castor wheel is easy to secure to a flight case. Made of steel, this 64mm-diameter castor supports up to 40kg loads.

In stock at supplier
In stock at supplier
Order before 10pm = in about 10 working days at home
Recommended price £17.15
£6.25

Penn Elcom C1343z Medium Ball Corner (22mm Offset)

The Penn Elcom C1343z ball corner is made of steel, has a 1mm internal radius and is compatible with 22mm extrusions. Install one at every corner of your DIY flight case and be assured of optimum protection.

In stock at supplier
In stock at supplier
Order before 10pm = in about 10 working days at home
Recommended price £1.76
£1.50

Penn Elcom C1344z medium ball corner, 46 mm, 22/22 extrusion

Protect the corners of your flight case with, for example, this medium ball angle from Penn Elcom. This variant has an internal radius of 0.5 millimetres, a 22/22 offset and three mounting holes for fixing.

In stock at supplier
In stock at supplier
Order before 10pm = in about 10 working days at home
Recommended price £2.54
£2.06

Penn Elcom R2414k 350mm Drawer Rails (2x, Black)

Build smooth-rolling drawers into a rack with this pair of Penn Elcom-designed drawer rails. Made from solid steel, these rails can bear up to 45 kilos and slide out for a total length of 702mm.

In stock at supplier
In stock at supplier
Order before 10pm = in about 10 working days at home
Recommended price £14.80
£10.60

Penn Elcom B1631z Panel Divider, 9.2mm

The Penn Elcom B1631z bracket can be used to install a 9.2mm panel to serve as an interior divider. This is a solid finisher for any self-build flight case in need of interior compartments.

In stock at supplier
In stock at supplier
Order before 10pm = in about 10 working days at home
Recommended price £3.41
£2.73

Penn Elcom B3001 Panel Mounting Bracket

The Penn Elcom B3001 steel mounting bracket is made for securing boards and panels inside flight cases. It's made of 1.2mm steel and is 17.5mm long (horizontally).

In stock at supplier
In stock at supplier
Order before 10pm = in about 10 working days at home
Recommended price £0.63
£0.54

Penn Elcom C1850z 6-Hole flat corner R5, 62mm

A sturdy flat angle for use, for example, in combination with various types of Penn Elcom insert profiles or angle profiles. Made of steel, fitted with three legs and an internal radius of five millimetres.

In stock at supplier
In stock at supplier
Order before 10pm = in about 10 working days at home
Recommended price £3.27
£2.80

Penn Elcom H7150/85k backplate for H7150 handle

For extra sturdiness of your built-in handle in your self-built flight case, it is best to also mount a backplate. This one from Penn Elcom belongs to a handle from the H7150 series, also from Penn Elcom.

In stock at supplier
In stock at supplier
Order before 10pm = in about 10 working days at home
Recommended price £4.42
£3.78

Penn Elcom H7150/85z Backplate for H7150 Handle

The Penn Elcom H7150/85 backplate is made for mounting and reinforcing a Penn Elcom H7150Z flight case handle.

In stock at supplier
In stock at supplier
Order before 10pm = in about 10 working days at home
Recommended price £3.05
£2.50

Penn Elcom H1435k heavy-duty lifting eye (black)

A sturdy steel lifting eye in a black finish, this H1435k from Penn Elcom. It is fixed in a dish with four mounting holes and is fitted with a spring so it always folds back into the dish.

In stock at supplier
In stock at supplier
Order before 10pm = in about 10 working days at home
Recommended price £12.10
£9.10

Penn Elcom C1339/30k Large Offset Heavy-Duty Ball Corner (Black)

Building your own black-edition flight case? Finish it in style with the Penn Elcom C1339/30K black ball corner. Made of 1.8mm-thick steel, this strong three-legged ball corner has an internal radius of 2.5mm and a 30mm offset. Each leg has two 5mm mounting holes.

In stock at supplier
In stock at supplier
Order before 10pm = in about 10 working days at home
Recommended price £4.01
£2.33

Penn Elcom L0915-15k Castor board catch plate (fits 18 mm wood), black

Make sure your flight case is firmly fixed to your wheel plate using a lock holder like this one from Penn Elcom. This version comes in matt black and fits 18-millimetre-thick wood.

In stock at supplier
In stock at supplier
Order before 10pm = in about 10 working days at home
Recommended price £2.78
£1.40

Penn Elcom C1335k Stacking Case Corner, 69mm (Black)

Made from 1.2mm-thick steel, this Penn Elcom case corner has a 12mm internal radius and a neat and flat, stackable design.

In stock at supplier
In stock at supplier
Order before 10pm = in about 10 working days at home
Recommended price £4.38
£4.01

Penn Elcom C1980z Large Flat Corner

The Penn Elcom C1980z large flat corner protects your flight case against knocks and bumps. Made of 1.2mm steel, this three-legged model comes with six 5mm pre-drilled mounting holes and has a 0.5mm internal radius.

In stock at supplier
In stock at supplier
Order before 10pm = in about 10 working days at home
Recommended price £3.64
£3.11

Penn Elcom L0953N draw latch, lockable

Penn Elcom's L0953N is a robust, lockable steel draw latch that will keep whatever you've got in your flight case safe and secure. The L0953N has 3.5 mm mounting holes.

In stock at supplier
In stock at supplier
Order before 10pm = in about 10 working days at home
Recommended price £10
£8.55

Penn Elcom D0511/07Z Horizontal Ventilation Dish

Polish off or modify a flight case or rack with the Penn Elcom D0506/07Z recessed ventilation dish and ensure optimised airflow. This 17.8mm by 12.7mm dish features four horizontal ventilation holes and is made from 1.2mm thick steel.

In stock at supplier
In stock at supplier
Order before 10pm = in about 10 working days at home
Recommended price £8.50
£5.90

Penn Elcom P1945N Flight Case Stop Hinge

Bearing outstanding design and build quality, the Penn Elcom P1945N hinge features a stop mechanism to give the lid of any DIY flight case or rack an ultra-secure finish.

In stock at supplier
In stock at supplier
Order before 10pm = in about 10 working days at home
Recommended price £2.93
£2.48

Penn Elcom 406mm Amplifier Supports for 6145 (Set of 2)

Neatly mount your amplifier in a rack with the help of this pair of 406mm supports. Compatible with Penn Elcom 6145 rack profiles, these supports are ultra strong and easily installed.

In stock at supplier
In stock at supplier
Order before 10pm = in about 10 working days at home
Recommended price £9
£6.70

Penn Elcom C0696z flat corner 54mm R5

This rugged flat corner can is ideal for your DIY flight case. It offers optimal protection against hits during transport.

In stock at supplier
In stock at supplier
Order before 10pm = in about 10 working days at home
Recommended price £3.41
£2.71

Penn Elcom L0575k Locking Latch

Made by Penn Elcom, this locking latch can be installed on a DIY flight case for a secure finish.

In stock at supplier
In stock at supplier
Order before 10pm = in about 10 working days at home
Recommended price £16.65
£7.85

Penn Elcom NC2C3K Flight Case Corner

The Penn Elcom NC2C3K three-legged corner is perfectly compatible with NC2DAE double extrusions and increases the strength of your custom-made flight case.

In stock at supplier
In stock at supplier
Order before 10pm = in about 10 working days at home
Recommended price £2.82
£1.65

Penn Elcom P1995K Large Slide-Lock Hinge (Black)

Bearing outstanding design and build quality, the Penn Elcom P1995K hinge features a slide-lock to give any DIY flight case or rack an ultra-secure finish.

In stock at supplier
In stock at supplier
Order before 10pm = in about 10 working days at home
Recommended price £9.45
£4.50

Penn Elcom x15070gg Smooth CON-Pearl Panel

Far lighter yet just as strong as wooden panels, Penn Elcom CON-Pearl Panels are the new ideal for custom built flight cases. This edition features a smooth surface that can take self-adhesive foils.

In stock at supplier
In stock at supplier
Order before 10pm = in about 10 working days at home
Recommended price £103
£81
To top
2 3 4 5 6 7 8 9 10 11
Compare your gear (1/10)