Based on more than 21,240 customer reviews

Penn Elcom Flight Cases & Flight Bags

(501)
Sort by:
Filters

Price range

(£0.00 - £1,000.00)

Type of Deal

  • 7 B-Stock
  • 8 Deals

Stock

  • 244 In stock online

Brand

Show more Show less

Condition

  • 494 New
  • 7 B-stock

Categories

Sustainable product

  • 501 not specified
Product specialists
Our specialists will give you the best possible service and are happy to offer excellent professional advice!
  • Rick Rick
  • Maarten Maarten
Special offers

Penn Elcom D0554z build-in lid stay large zinc

If you use this Penn Elcom D0554z lid stay in addition to your regular hinges, the lid of your flight case will stay open without falling backwards. This large edition lid stay has a zinc finish.

In stock
In stock
Order now = receive it on Tuesday
Recommended price £8
£6.85

Penn Elcom D0593z build-in lid stay small

Thanks tot his lid stay the lid of your flight case will stay open but not fall backwards. This way, it’s easy to close your flight case again after using it.

In stock
In stock
Order now = receive it on Tuesday
Recommended price £6.50
£5.55

Penn Elcom dish, 112 x 102 mm

This dish is not perforated and can therefore be used for many applications. It is fitted with four pre-drilled holes with a diameter of 5 mm each so you can start stacking or mounting straight away.

In stock
In stock
Order now = receive it on Tuesday
Recommended price £3.17
£2.72

Penn Elcom dish 11 x 10 cm

This dish is not perforated and can therefore be used for a variety of applications. You can use it for the top of your flight case, for stacking purposes, for instance.

In stock
In stock
Order now = receive it on Tuesday
Recommended price £16.65
£2.87

Penn Elcom dish 112 x 102 mm 2 x XLR D

This dish has two punched D-size holes for XLR connectors and is suited for build-in purposes. It has four 5mm mounting holes and is made of 1.2mm-thick black steel.

In stock
In stock
Order now = receive it on Tuesday
Recommended price £38
£5.90
Bargain
buy

Penn Elcom dish 110 x 100 mm, 1 Neutrik D

This zinc dish, with a pre-punched hole, can be mounted to to your preference. You can provide it with an XLR D connector. Thanks to the pre-drilled holes you can use it immediately.

In stock
In stock
Order now = receive it on Tuesday
Recommended price £5.05
£4.34

Penn Elcom D2116L Tour Label, 210 x 150mm

Slap this on your flight case and know exactly what's stowed inside once it reaches the venue. This purpose-designed tour label is 21cm wide, 15cm high and made of plastic so it can be wiped clean and reused.

In stock
In stock
Order now = receive it on Tuesday
Recommended price £10.10
£7.95

Penn Elcom Rubber Foot with Steel Ring, 38 x 20mm

With this heavy-duty rubber foot you can get a grip on all surfaces, and your cable case, flight case and floors will suffer no more damage. The rubber foot is easy to mount and comes with a steel washer with a diameter of 5 mm.

In stock
In stock
Order now = receive it on Tuesday
Recommended price £1.84
£1.24

Penn Elcom plastic pocket handle

Synthetic pocket handle for speaker cabinets. Has a 102 x 59mm cutout and is equipped with four pre-drilled holes with a diameter of 4.5 mm each.

In stock
In stock
Order now = receive it on Tuesday
Recommended price £3.55
£3.17

Penn Elcom strap handle metal caps

This handle can be used for your flight case, toolbox or cable box, for instance. It's equipped with two pre-drilled holes and is made of PVC and steel.

In stock
In stock
Order now = receive it on Tuesday
Recommended price £3.04
£2.69

Penn Elcom sprung service handle

You obviously want the right protection for your valuable equipment. Are you building a flight case? This surface handle does not only protect, it also increases the efficiency and ease-of-use of the case.

In stock
In stock
Order now = receive it on Tuesday
Recommended price £41
£4.98

Penn Elcom recessed steel bar handle large 12 holes

This recessed bar handle is made of 0.9 mm thick steel and has a black colour. Easy to build into one of your speaker cabinets. It is 63 mm deep and equipped with twelve pre-drilled holes with a diameter of 5.5 mm each.

In stock
In stock
Order now = receive it on Tuesday
Recommended price £10.40
£8.15

Penn Elcom medium rivet protected recessed handle 8.5 mm black

It is obvious that you want the right protection for your valuable equipment. Are you building a flight case? With this handle you will not only have protection for your flight case, but efficiency and ease of use as well!

In stock
In stock
Order now = receive it on Tuesday
Recommended price £13.05
£6.10

Penn Elcom rivet protected recessed handle 8.5 mm zinc

This rivet-protected recessed handle is comfortable to use, thanks to the thick rubber handle that is attached to it.

In stock
In stock
Order now = receive it on Tuesday
Recommended price £6.50
£5.95

Penn Elcom build-in recessed handle 10 mm zinc

Penn Elcom build-in recessed handle with double spring. It is made of 1.5 mm thick steel and has a zinc colour.

In stock
In stock
Order now = receive it on Tuesday
Recommended price £13.05
£6.10

Penn Elcom draw bolt small

This small Penn Elcom draw bolt is made of steel and has a zinc colour. Easy to mount on to one of your flight case.

In stock
In stock
Order now = receive it on Tuesday
Recommended price £4.96
£1.66

Penn Elcom large draw bolt padlock-able

Comes with an eye that allows you to lock your flight case with a padlock. Equipped with six mounting holes with a diameter of 4.8 mm each.

In stock
In stock
Order now = receive it on Tuesday
Recommended price £3.22
£1.68

Penn Elcom small butterfly latch in plain split dish

This Penn Elcom butterfly latch can be built in to your flight case. It is made of steel and has a zinc colour. You can also secure the lock with tie-wraps.

In stock
In stock
Order now = receive it on Tuesday
Recommended price £14.40
£5.05

Penn Elcom strut hinge, 78 x 37 mm

This Penn Elcom strut hinge is made of nickel-coloured steel. It is fitted with mounting holes with a 4.5mm diameter.

In stock
In stock
Order now = receive it on Tuesday
Recommended price £2.24
£1.92

Penn Elcom Rack Shelf 1U, 272 mm deep

This Penn Elcom 1U rack shelf is made of steel and finished with black powder coating. Easy to fit into one of your 19” racks. Handy for a laptop or other loose equipment.

In stock
In stock
Order now = receive it on Tuesday
Recommended price £26
£18.95

Penn Elcom 4U Rack Tray (368mm Deep)

This Penn Elcom-made 4U Rack Shelf has been forged out of steel and finished with a black powder coating. Mounted in a 19" rack, it's the perfect place for a laptop or other outboard gear.

In stock
In stock
Order now = receive it on Tuesday
Recommended price £37
£34

Penn Elcom rack panel 0.5U steel

This rack panel is made from 1.2 mm steel and comes with four mounting holes. This 19 inch panel is 0.5U high.

In stock
In stock
Order now = receive it on Tuesday
Recommended price £8.05
£3.27

Penn Elcom 1U 12 XLR-D Rack Panel

Steel rack panel punched with 12 holes. Mountable into one of your 19” racks. You can use this plate for your patch bay, for instance. The holes are suitable for Neutrik D-series connectors like XLR.

In stock
In stock
Order now = receive it on Tuesday
Recommended price £63
£10

Penn Elcom 1U steel rack panel with ventilation holes

This black U-shaped rack panel is made of 1.2 mm steel and equipped with ventilation holes. Provide proper heat dissipation for your 19-inch amplifier rack with this Penn Elcom ventilation rack panel.

In stock
In stock
Order now = receive it on Tuesday
Recommended price £12.10
£4.24

Penn Elcom 2U Ventilated Blind Plate, Steel

This Penn Elcom designed blind plate is 2U high, made of 1.2mm-thick steel and has been perforated to support efficient ventilation.

In stock
In stock
Order now = receive it on Tuesday
Recommended price £10.40
£7.30

Penn Elcom 3U Perforated Steel Blind Plate

This U-shaped blind plate from Penn Elcom features ventilation holes and has been made of 1.2mm thick steel. This is the 3U version.

In stock
In stock
Order now = receive it on Tuesday
Recommended price £14.60
£7.70

Penn Elcom sliding rack tray, 1U

This Penn Elcom sliding rack tray with adjustable depth is made of 1.2 mm steel and is fitted with several fixing points. It can easily be mounted in one of your 19 inch racks.

In stock
In stock
Order now = receive it on Tuesday (free)
Recommended price £78
£54
Penn Elcom 3U Rack Panel with DIN Rail
EXTRA 5% OFF WITH CODE: EXTRA5

Penn Elcom 3U Rack Panel with DIN Rail

EXTRA 5% OFF WITH CODE: EXTRA5

This front panel has been made from 1.5mm-thick steel, comes with a DIN rail and is fully set up for installing 19 inch gear like lighting powerpacks, fully protecting it from dust and fluff while granting access to any fuses.

In stock
In stock
Order now = receive it on Tuesday
Recommended price £65
£24.10

Penn Elcom castor with blue rubber wheel 100 mm

Castor with blue rubber wheel of 100 mm. Equipped with four mounting holes and finished with a zinc colour.

In stock
In stock
Order now = receive it on Tuesday
Recommended price £10.60
£7.55

Penn Elcom Swivel Castor Wheel with Brake, 100mm

100mm braked swivel caster . The swivel caster has four mounting holes and a zinc-coloured finish.

In stock
In stock
Order now = receive it on Tuesday
Recommended price £17.35
£9.80

Penn Elcom Swivel Castor Wheel, 100mm

Swivel caster with a 100 mm diameter. Comes with pre-drilled mounting holes and has a zinc colour finish.

In stock
In stock
Order now = receive it on Tuesday
Recommended price £13.30
£7.65

Penn Elcom rack drawer with lock, steel, 3 U

This heavy-duty rack mount drawer by Penn Elcom is equipped with a slam lock, a key lock and an integrated front pull handle. The ball bearings ensure that it opens and closes smoothly.

In stock
In stock
Order now = receive it on Tuesday (free)
Recommended price £96
£83

Penn Elcom drawer with lock, steel, 4U

This heavy-duty rack-mountable steel drawer with lock by Penn Elcom offers 4U of 19-inch rack space. Its ball bearings ensure smooth opening and closing and it has a slam latch too.

In stock
In stock
Order now = receive it on Tuesday (free)
Recommended price £93
£86

Penn Elcom Flat Plastic Washers (M6, Pack of 100)

Avoid scratches when installing gear into a 19" rack with this pack of Penn Elcom plastic washers. These M6-sized washers come in a pack of 100 and have a black finish.

In stock
In stock
Order now = receive it on Tuesday
Recommended price £6.95
£5.95

Penn Elcom dish for 2 Neutrik NL8MPR

This dish can accommodate two Neutrik G series speakON connectors.

In stock
In stock
Order now = receive it on Tuesday
Recommended price £11
£10.10

Penn Elcom 0130 aluminium angle extrusion 30 x 20 x 1.5 mm

This single angle extrusion by Penn Elcom is made of aluminium and has a length of 1.70 m.

In stock
In stock
Order now = receive it on Wednesday
Recommended price £6.65
£5.45

Penn Elcom 6060 aluminium rack extrusion with sliding system - 1.7 metres

The Penn Elcom 6060 is a 1.7 metre-long aluminium rack extrusion with a sliding system.

In stock
In stock
Order now = receive it on Wednesday
Recommended price £20.35
£16.60

Penn Elcom W0098-FM Swivel Castor Mounting Plate

The Penn Elcom W0098-FM is a handy little mounting plate for castor wheels. It comes with four M8-threaded mounting points and makes securing castors to flight cases as quick-and-easy as possible.

In stock
In stock
Order now = receive it on Tuesday
Recommended price £6.40
£3.36
Bargain
buy

Penn Elcom B0700z Brace (32 x 25mm)

The Penn Elcom B0700z brace is made of 1.2mm-thick steel, has a 1mm internal radius and comes with four 5mm pre-drilled mounting holes.

In stock
In stock
Order now = receive it on Tuesday
Recommended price £1.01
£0.86

Penn Elcom D2117L Tour Label (29 x 19cm)

From gigs and tours to moving rehearsal spaces, a tour label like this one from Penn Elcom can come in really handy. It's self-adhesive and can be marked with the box number, date and contents.

In stock
In stock
Order now = receive it on Tuesday
Recommended price £10.60
£9.10

Penn Elcom D2101k 18x13cm Recessed Flight Case Dish (Black)

The Penn Elcom D2101 dish has been thoughtfully left un-punched so it can be customised to meet your needs. Made of steel, this plain dish is a durable finishing touch for a custom flight case.

In stock
In stock
Order now = receive it on Tuesday
Recommended price £8.10
£6.95

Penn Elcom R2510-1U Rack Mount Bracket

Designed and built by Penn Elcom, this neat 1U rack mount bracket can be quickly and easily installed in any 19 inch rack, secured to a desk, or mounted onto a wall.

In stock
In stock
Order now = receive it on Tuesday
Recommended price £40
£24.90

Penn Elcom B1125z Brace (29 x 40mm)

The Penn Elcom B1125z brace is made of 1.2mm-thick steel, has a 2mm internal radius and comes with four 5mm pre-drilled mounting holes.

In stock
In stock
Order now = receive it on Tuesday
Recommended price £0.77
£0.30
Bargain
buy

Penn Elcom B1128z T-Corner Bracket, 50 x 42mm

This 50mm by 42mm Penn Elcom T-corner bracket comes in a zinc-coloured finish and has been pre-drilled with six 5mm mounting holes to ease installation.

In stock
In stock
Order now = receive it on Tuesday
Recommended price £1.61
£1.38
Bargain
buy

Penn Elcom B1130-25-HINGE Hinged Corner Brace

The Penn Elcom B1130-25-HINGE hinged corner brace is a handy two-in-one bit of rack/flight case hardware. It comes with twelve mounting holes and has an internal radius of 2mm in the middle and 5mm near the edges.

In stock
In stock
Order now = receive it on Tuesday
Recommended price £4.75
£4.07

Penn Elcom C1340z Large 1.5mm R2 Ball Corner

Designed to meet professional standards, this Penn Elcom ball corner is made from 1.5mm-thick steel, has a 2.5mm internal radius and a three-leg construction, each pre-drilled with two mounting holes.

In stock
In stock
Order now = receive it on Tuesday
Recommended price £2.87
£1.19

Penn Elcom C0670n Flat Corner, 40mm, R2

Built to sure up the corners of a flight case, the Penn Elcom C0670n flat corner is made from steel, comes pre-drilled with mounting holes and features a 1.6mm internal radius.

In stock
In stock
Order now = receive it on Tuesday
Recommended price £2.91
£1.99

Penn Elcom C1359z Brace Ball Corner

This ball corner not only protects against impacts but reinforces your flight case at the same time. It's also easy to mount thanks to the three pre-drilled mounting holes.

In stock
In stock
Order now = receive it on Tuesday
Recommended price £3
£2.57
▾
To top
Compare your gear (1/10)