With the Shure QLXD14E/SM35 wireless headset system, you can always be heard clearly and have your hands free. Shure's SM35 headset microphone has a condenser capsule with a cardioid directional characteristic.
The Shure QLXD14E/93 wireless microphone set comes with the Shure WL93 lavalier. This tie microphone delivers a surprisingly full and clear sound. The QLXD system ensures perfect digital signal transmission.
The Shure QLXD14-153B is a wireless headset system, supplied with the omnidirectional MX153B earset microphone. Experience top quality, ease of operation and optimum freedom of movement!
The Shure QLXD14-153T is a wireless headset system, supplied with the omnidirectional MX153B earset microphone. Experience top quality, ease of operation and optimum freedom of movement!
Shure UA700-V VHF beltpack antenna for ULX-D/QLX-D VHF beltpacks.
Shure UA8-174-216 1/2 wave dipole antenna part (174 - 216 MHz). This antenna is suitable for Axient, UHF-R, ULX-D, ULX, SLX and BLX4R receivers and PSM1000 and PSM900 transmitters of the same frequency.
The Shure AMV-PC accessory kit for MV88+ includes a microphone clamp and telephone clamp. These accessories come standard with the MV88+ Video Kit and serve as a spare part.
The Shure HA-8091 Domed Helical antenna is a domed helical antenna that delivers unmatched, drop-out-free wireless performance for wireless in-ear monitor systems, microphone systems and intercoms.
The Shure WA411 is a spare part for the Shure TL45 tie microphone, specifically the LEMO connector. The WA411 is suitable for cables with a diameter of 1.1 millimetres.
This loose Shure WA416 connector covers the LEMO(3) microphone connector used on the Shure TL46, TL47 and Shure TL48 tie-pin microphones. The WA416 is also suitable for other 1.6 mm thick cables.
For Shure TwinPlex tie pin microphones with an MTQG connector, the Shure WA430 is a spare part, with a female MTQG (TA4F) connector.
The Shure WA435 is a loose 5-pin MTQG (TA5F for Lectrosonics) Connector Kit that allows you to attach a TA5F connector to your TwinPlex tie-pipe microphone.
The Shure WA445 refers to a threaded collar, a spare part for the WA430 and WA435 Connector Kits.
The Shure MD40TA5F is a handy adapter, equipped with a Microdot to TA5F reducer for Shure bell packs and similar equipment.
The Shure RPM400LEMO is a wired microphone preamplifier with an adapter from LEMO3 to XLR connector. This preamplifier is suitable for all Shure TwinPlex microphones such as the TL45, 46, 47, 48 and TH53 headsets.
The Shure RPM400LEMO is a wired microphone preamplifier with an adapter from TQG to XLR connector. This preamplifier is suitable for all Shure TwinPlex microphones such as the TL45, 46, 47, 48 and TH53 headsets.
Looking for the flattest possible microphone response for your Shure TwinPlex TH45, 46, 47 or TH53 tie and head microphone(s)? With the Shure RPM40FC, you have a handy set of 10 Flat Caps suitable for this purpose.
The Shure RPM40KIT is a handy, all-in-one accessory kit for your Shure TwinPlex TL microphones. This kit comes with frequency caps, clamps, mounts, windshields, stickers and a storage bag!
To mount a single Shure TwinPlex TL microphone, you can use this Shure Magnet Mount set. This set consists of 2 pieces.
For outdoor use of the Shure TwinPlex tie-pin microphones, a professional windjammer is definitely recommended. In cooperation with Rycote, Shure therefore offers this Mini Windjammer set, with 2 windshields!
With the Shure RPM40PC, it is possible to simply adjust the frequency response of your Shure TwinPlex microphone such that your voice has more presence in recordings and in sound reinforcement.
The Shure RPM40SM consists of 3 transparent Sticky Mounts, including adhesive. These allow you to mount your Shure TwinPlex tie-pin microphone anywhere you want!
The Shure RPM40SO is a kit consisting of 10 Standoffs for RPM40(S)TC Dual and Single tie pin clips. This kit is suitable for all TL40 lavalier microphones.
To clamp a single Shure TwinPlex TL40 tie-piping microphone, use a Shure RPM40STC tie-piping clamp. This is a set consisting of three tie pin clamps.
To clamp a single Shure TwinPlex TL40 tie-pipe microphone, use a Shure RPM40STC tie-pipe clamp. This is a set consisting of three tie pin clamps.
You can use Shure's Vampire Sticky Mounts to attach your TwinPlex TL40 or similar tie-pin microphones. This is a set of 3 Vampire Sticky Mounts.
To attach two Shure TwinPlex TL40 or similar lavaliers to your lapel, use the Shure RPM40TC Dual tie pin clamps. This is a set consisting of three clamps.
To clamp a single Shure TwinPlex TL40 tie-pipe microphone, use a Shure RPM40STC tie-pipe clamp. This is a set consisting of four tie pin clamps in four different colours.
The Shure RPM40TS gives you extra stickers for your Sticky Mounts! These double-sided sticky mounts are available in sets of 15, and sets of 50.
Ran out of adhesive stickers for your Sticky Mounts? Grab the Shure RPM40TS pack and replenish your stock with 50 fresh, double-sided adhesives.
The Shure RPM40VM Vampire Mounts are named after the unique way you can attach them to your clothing by the two sharp pins. This is a set of 3, suitable for a variety of tie-pin microphones!
