Professional and complete, the Rode Lavalier II clip-on microphone features an omnidirectional polar pattern and a uniquely flat, low-profile design to ensure maximum discretion. Windshield, pop filter, and case included.
The Rode Thread Adapter actually combines three screw thread adapters into one. Fit it to your camera bag or key ring via the carabiner clip and you'll never have to deal with thread-incompatibility issues again.
Transform your phone into a fully-fledged, pocket-sized TV studio with the Rode USB-C Vlogger Kit. This accessory pack raises the performance of the built-in mic of your phone, and your general setup, to a more professional level.
The Rode Lavalier GO is an omni-directional lavalier microphone that works together perfectly with the Rode Wireless GO system. It also works with other devices that have a mini-jack connector.
The Rode VXLR+ phantom power adapter is an ideal addition for products like the VideoMic. It converts XLR to mini jack and 12 - 48-volt phantom power to 3 - 5-volt plug-in power.
The Rode VideoMic MKII has enjoyed a little update to yield a big increase in the quality of your sound. The MKII version features a Rycote suspension, so there will be no more messing about with elastic bands!
Rode's VideoMic Pro Rycote is the improved version of the VideoMic Pro. With its new, high-quality Rycote Lyre shock mount and more sensitive capsule.
The Rode NT-USB MINI microphone has everything needed to produce professional-grade audio. Whether it's for content creation, gaming, or meetings, this compact Rode mike is the perfect addition to any desktop or home studio set-up.
While the foam windshield that came included with your Rode VideoMic Go II will protect your recordings from a light breeze, if you're working outdoors on location, you'll definitely need something more hefty, like the made-to-measure WS12.
Keep track of what's going on with this Rode-compiled pack including four NT-USB Minis and four Mini Coloured Caps that conveniently match the channel colours in RØDE's Connect software.
The Rode Wireless Micro is a wireless microphone system specifically for smartphones. Connect the USB‑C receiver to your phone and you can immediately use the two transmitters with built-in microphone for all your content!
Do you already own a Wireless Micro transmitter, and are actually looking for a nice reporter microphone? With this RØDE Interview Micro adapter, you can put that transmitter in the holder, put the plop cap on it, and you're done!
The Rode NT1 Signature Series large-diaphragm condenser microphone shines in simplicity, just like its predecessor: the NT1-A. Includes SM-6 shockmount with pop filter and cover.
The Rode Interview GO handle turns the separately available Wireless Go tie-pin microphone into a handheld microphone. Ideal for interviews. Includes foam windshield.
If you do want to invest in the Wireless Go Gen 3 wireless tie-pick microphone, do yourself a favour, and pick up this Charging Case+ as well. A handy case for charging your Wireless Go III system.
This set of 2 elastic bands can be used as a replacement part for the SM6 shockmount by Rode.
In the past, Rode have described the M1 as canned Rock & Roll and not without reason! The M1 dynamic microphone is a true on-stage beast that can take a bit of musician/roadie handling.
The Rode M2 is a cardioid condenser microphone suited for both the studio and the stage. The M3 has a wide range and a low signal noise ratio.
The Rode NT2 A is a professional large-diaphragm capsule studio microphone with a switchable pickup pattern that can be used for all manner of studio recordings. It has three different settings: omni, cardioid and figure of 8.
The Rode NT5 condenser studio microphone has a highly focussed cardioid pickup pattern, making it cut out for capturing acoustic instruments, drums, wind instruments and percussion with maximum detail.
This matched pair of Rode NT5 small-diaphragm condenser microphones can be set up to capture stunning stereo recordings in an X-Y, A-B, or ORTF configuration, or can be used for mono close-miking.
The NT55 set contains a matched pair of compact, balanced condenser microphones, fit for a variety of applications. It excels because of its wide dynamic range and complete frequency response.
The Rode K2 is a large-diaphragm tube microphone and has a number of unique properties, one of which is the unique, fully adjustable pickup pattern.
The Rode Procaster is a professional dynamic microphone, which is perfect for broadcasting thanks to its closed pickup pattern an specific frequency response.
The Rode NTG1 shotgun microphone is specifically designed for the film, video, television, voice-over and production industry.
The Rode NTG2 is a directional microphone that is specifically designed for film, video, TV, voice over and ENG applications. The main difference between the NTG2 and NTG1 is an internal battery.
Rode SM2 shock Mount for the Rode NT2A, NTK, K2, NT1000, NT2000 and the Classic 2.
The PSM1 is a shockmount for the Rode Procaster and the Podcaster.
Rode WS2 windscreen for the Rode K2, NTK, NT1-A, NT2-A, NT1000, NT2000, Procaster and Broadcaster.
The WS6 windshield is fit for the Rode NTG1 and NTG2 microphones. Thanks to the thick filling, the WS6 is fit for use in windy situations - it ensures that you are intelligible by keeping wind noise out.
The Rode WSVM is used when your recording environment only suffers from a little bit of wind. It is also used to suppress loud sounds in speech.
The Røde Dead Kitten wind shield is specifically designed for the iXY, Stereo VideoMic and NT4 microphones. It minimises ambient noise in extremely windy situations.
Rode's SM6 is a shockmount and pop shield in one. It is not only suited for Rode microphones, it also fits other brands.
The RM2 is a low-profile professional stand mount for the models including the Rode NT2-A, NT1000, NT2000, NTK, K2, Classic II & Broadcaster microphones.
With the Rode NTG-2 directional condenser microphone and a boom pole, you are provided with a perfect set for on-location recordings.
If you are creating recordings with your Rode Blimp microphone, you need as transparent a sound as possible. The Rode Dead Wombat keeps wind out of your recordings.
Have you just invested in an audio interface or mixing console? Very nice! To make things easy for you, Bax has created some BAX-advised sets of microphones with the right accessories.
Resetting the gold-standard when it comes to capturing supreme-quality audio on location, the RØDE VideoMicro shotgun microphone is now the VideoMicro II: the same but even better.
The Rode WS14 pop filter has been purpose-designed for the Rode PodMic and PodMic USB and counters the noise that comes with plosives like Ps and Fs.
The Rode WS11 Windshield has been exclusively designed to fit the VideoMic NTG camera microphone and has been made from faux-fur, making it far more effective than standard foam.
The Rode Magclip GO offers you an ingenuous way to attach and hide your Wireless GO lavalier microphone behind your lapels. All that remains visible is a sleek, clean-looking magnet.
Use the Rode Interview GO hand grip to turn your Wireless Go lavalier into a handheld microphone and get it ready for interviews! Foam-rubber wind shield included.
