▾

Yamaha PX5 Class-D amplifier 2x 800W @ 4 ohms

no reviews yet write a review

Recommended price £949 -19%

£767 incl. 20% VAT

General

Yamaha have applied their extensive audio expertise on the development of the PX5 amplifier. It's a 19-inch Class-D stereo amp with 2x 800 watts at 4 ohms and 2x 500W at 8 ohms. This amp has crossover, filters, delay, limiter and EQ presets to make the most of your sound. Both beginners and seasoned audio professionals are sure to appreciate how easy it is to work work with this amp thanks to the Basic or Advanced setup modes. The PX5 is equipped with XLR and TRS inputs, SpeakON and Phone outputs. The Yamaha PX5 makes it possible to configure panel settings, monitor the amp status and even export data to USB for troubleshooting purposes.

Tips or comments about this product

Please note: the image shows the PX10, but you will receive the PX5.

Specifications

Product features

Sustainable product	not specified
RMS power (4 ohms) per channel	800 - 899 watts
RMS power (at 8 Ohms) per channel	500 - 599 Watts
2-ohm compatible	yes
Amplifier class	D
Number of amplifier channels	2
19-inch rack size	2U
Amplifier output	locking speaker connector, 6.3mm jack, wire clamps
Input	jack (6.3 mm), XLR
Equipped with crossover	no
Built-in DSP processor	yes
Cooling	ventilator
Bridge mode	no
Built-in protection	overload, thermal, short circuit, clip indicator
Audio loop output	no
Built-in filter	HPF, LPF

Weight and dimensions including packaging

Weight (incl. packaging)	9,1 kg
Dimensions (incl. packaging)	55,5 x 55,0 x 19,5 cm

Product specifications

Yamaha PX5 Class-D amplifier 2x 800W @ 4 ohms
power capacity:
- 8 ohms: 2x 500W
- 4 ohms: 2x 800W
- 2 ohms: 2x 500W
- 8 ohms/Power Boost: 1x 800W
- 4 ohms/Power Boost: 1x 1400W
sampling frequency: 48 kHz
THD: 0.1%
frequency response: 20 Hz - 20 kHz
S/N ratio: 100 dB
crosstalk: <-60 dB
maximum input level: +24 dBu
input impedance: 20 kOhms
connectors:
- speaker outputs
  - 2x Neutrik speakON NL4
  - 2x Binding post pairs
  - 2x jack (TS)
- line inputs:
  - 2x XLR
  - 2x jack (TRS)
- other:
  - USB 2.0
indicators:
- POWER x1 (green)
- ALERT x1 (red)
- USB x1 (green)
- PROTECT x2 (red)
- CLIP/LIMIT x2 (red)
- SIGNAL x2 (green)
- Auto LED off option
latency: 1.5 ms
presets: 8x user (+ factory preset for Yamaha speakers)
dimensions: 480 x 88 x 388 mm
weight: 6.9 kg
included:
- USB cover
- user manual
- spec sheet
- power cable

Description	Type	Language	Extension
Handleiding PX-serie	Manual	Dutch

Yamaha PX10 amplifier:

Online stock status:

Temporarily unavailable

Recommended price £1,364

£844

Sustainable product	not specified
RMS power (4 ohms) per channel	1200 - 1299 watts
RMS power (at 8 Ohms) per channel	1000 - 1099 Watts
2-ohm compatible	yes
amplifier class	D
number of amplifier channels	2
19-inch rack size	2U
amplifier output	locking speaker connector, 6.3mm jack, wire clamps

Input	jack (6.3 mm), XLR
equipped with crossover	no
built-in DSP processor	yes
cooling	ventilator
bridge mode	no
built-in protection	overload, thermal, short circuit, clip indicator
audio loop output	no
built-in filter	HPF, LPF

Yamaha PX8 amplifier:

Online stock status:

Temporarily unavailable

Recommended price £1,085

£855

Sustainable product	not specified
RMS power (4 ohms) per channel	1000 - 1099 watts
RMS power (at 8 Ohms) per channel	800 - 899 Watts
2-ohm compatible	yes
amplifier class	D
number of amplifier channels	2
19-inch rack size	2U
amplifier output	locking speaker connector, 6.3mm jack, wire clamps

Input	jack (6.3 mm), XLR
equipped with crossover	no
built-in DSP processor	yes
cooling	ventilator
bridge mode	no
built-in protection	overload, thermal, short circuit, clip indicator
audio loop output	no
built-in filter	HPF, LPF

Yamaha PX3 Class-D amplifier 2x 500W @ 4 ohms

Online stock status:

Temporarily unavailable

Recommended price £921

£769

Sustainable product	not specified
RMS power (4 ohms) per channel	500 - 599 watts
RMS power (at 8 Ohms) per channel	300 - 349 Watts
2-ohm compatible	no
amplifier class	D
number of amplifier channels	2
19-inch rack size	2U
amplifier output	locking speaker connector, 6.3mm jack, wire clamps

Input	jack (6.3 mm), XLR
equipped with crossover	no
built-in DSP processor	yes
cooling	ventilator
bridge mode	no
built-in protection	overload, thermal, short circuit, clip indicator
audio loop output	no
built-in filter	HPF, LPF