Ampeg SGT-DI Bass Guitar Preamp DI Pedal

Sustainable product	not specified
guitar preamp functions	boost / gain / level, tone control, DI, ground lift
true bypass	no
mini pedal	no
Voltage	9 V, 12 V
can be powered by battery	no
Centre positive/negative	centre negative

Power supply plug	barrel 2.1 mm (inner diameter)
adapter included	no
type of dynamic effect	~
type of distortion	~
variable voltage	~
equipped with tube	~

Ampeg SGT-DI Bass Guitar Preamp DI Pedal
Product no: 9000-0109-6947 Bax Music Warranty: This product comes with a 3-year warranty.

General

Ampeg unveil the SGT-DI: a complete bass guitar rig crammed in a stompbox loaded with an improved Super Grit Technology overdrive-circuit. Fire up the preamp via the left footswitch to choose between the Ampeg SVT and B15 voicings, then use the 3-band EQ and integrated sweepable Mid circuit to sculpt your sound to taste by boosting or weakening frequencies in the 200Hz to 3kHz range, or flip the dedicated ultra-hi and ultra-lo switches to tweak the bass and treble frequencies.

The SGT-DI: Deeply Realistic, Fully Customisable Sound

Engage the SGT footswitch on the right before using the Grit control to dial in the drive and the concentric potentiometer on the left to adjust the effect volume as well as the compression. Meanwhile, the built-in IR Loader / Cab Simulator of the SGT-DI serves up three classic cabinets but can also be used to load three external IRs. Plug in a pair of headphones to play in private, or hook up your phone via the AUX input to play over your favourite backing tracks.

Tips or comments about this product

Downloadable Ampeg IR Loader software for mode-switching and loading 3 custom IRs

Specifications

Product features

Adapter included	no
Centre positive/negative	centre negative
Sustainable product	not specified
Guitar preamp functions	boost / gain / level, tone control, DI, cabinet simulator, ground lift
Mini pedal	no
True bypass	no
Power supply plug	barrel 2.1 mm (inner diameter)
Type of dynamic effect	compressor
Type of distortion	overdrive
Variable voltage	no
Can be powered by battery	no
Voltage	9 V
Equipped with tube	no

Weight and dimensions including packaging

Weight (incl. packaging)	1,4 kg
Dimensions (incl. packaging)	31,0 x 18,0 x 11,5 cm

Product specifications

Ampeg preamp DI pedal for bass guitars
model: SGT-DI
improved Super Grit Technology overdrive-circuit with Ampeg SVT and B15 voicings
3-band EQ with sweepable Mid circuit
Ultra-Hi and Ultra-Lo 3-way switches
Impulse Response Loader / Cab Simulator
cab level control for adjusting and saving IR sound & IR off mode to bypass the IR circuit
modes:
- Cab: Ampeg Heritage B-15, Heritage SVT-410HLF and SVT-810 Squareback IRs
- User: Ampeg SVT-112AV, SVT-210AV and SVT-212AV IRs
variable 10:1 compressor
controls:
- vol / comp
- bass
- mid / freq (200 Hz - 3 kHz)
- treble
- grit / level
- cab level
- aux level
switches:
- preamp
- SGT
- cab (115 / 410 / 810 - A / B / C)
- ultra lo - / +
- ultra hi o / +
- voice SVT / B15
- lift/gnd
- cab / off / user
inputs:
- 6.35mm mono jack input
- 6.3mm mono jack aux in
- aux (stereo mini-jack)
- USB
outputs:
- 6.35mm mono jack thru
- 6.35mm mono jack preamp out
- 6.35mm jack line out / phones
- XLR direct out
power supply: 9V, 500 mA, centre negative
signal to noise ratio: 106 dB, 20 Hz-20kHz)
max. gain:
- preamp out: 57dB @ 1kHz
- headphone out: 57dB @ 1kHz
- XLR out: 37dB @ 1kHz
dimensions:
- 189 x 126 x 65mm (excluding rubber feet)
- 201 x 126 x 65mm (with side knobs pulled out, excluding rubber feet)
weight: 0.85 kg

Write a review

Reviews from other countries

Translate all reviews into English View original reviews

Willum December 22, 2023

Wrote the following about Ampeg SGT-DI Bass Guitar Preamp DI Pedal

Prima DI pedaal met veel mogelijkheden om mijn basgeluid naar een hoger niveau te tillen. Dit zowel in de studio als via mijn versterker. Ik ben er erg tevreden over. Het geluid van mijn passieve Jazz- en Precision Bas krijgt een extra punchin de activ stand en de Agt stand geeft een mooi buizen randje aan het geluid 😁