The Shure SB903 rechargeable lithium-ion battery is fully compatible with all Shure SLX-D Series transmitters.
The Shure PS43E is here to replace the PS31E, PS40E and PS41E mains power adapters, and is compatible with receivers from the LX, UC, SC, ULX, SLX and PSM Series.
The Shure A2WS microphone windshield keeps unwanted noise caused by breath or wind at bay. It also features a locking system that will keep it firmly in place!
A Shure Beta 87 microphone is quite valuable, so it should be well protected. If its grille is damaged, replace it with this RK312 microphone grille!
The Shure RK265G is the easiest way of replacing your Beta58A's damaged grill, keeping your mic safe, and keeping its great sound intact!
Did you break the grille of your Shure SM58 microphone? No need to panic, you can simply replace it with the RK143G microphone grille!
The Shure A58WS microphone windscreen eliminates wind and breath noise without affecting overall sound quality. It's suited for ball-type mics, such as the Shure SM58, Beta 58A, etcetera.
The Shure UA802-RSMA is a 60cm-long SMA coax cable with reversed polarity that can be used to set up the antennas of a GLX-D wireless system a little farther away.
The Shure SB900C is a rechargeable Li-ion battery that can be used with several Shure products.
The Shure Nexadyne RPM283 is a compatible replacement grille for the Nexadyne RPW206 microphone capsule.
Premium 1/4" right angle instrument cable with lockable TA4F connector.
The Shure A58WS microphone windshield reduces wind and breath noise, and it's suited for ball-type mics such as the Shure SM58 and Beta 58A. Check it out!
Shure microphones need to be properly protected against unwanted noise, and the Shure A85WS windshield does just that. It's suited for Shure Beta 87A/C, SM87A, SM86, SM85 and BG5.1 microphones.
This sturdy belt has a cloth pouch for carrying your UR1 or UR1H bodypack transmitter. Available in both black and white, so pick your own style!
Are you tired of noise ruining your recordings or broadcasts? The RK345 takes care of wind and breath noise, leaving you with a clear recording.
The Shure RPM400LEMO is a wired microphone preamplifier with an adapter from TQG to XLR connector. This preamplifier is suitable for all Shure TwinPlex microphones such as the TL45, 46, 47, 48 and TH53 headsets.
Do you want to connect a line level output to a microphone input without damaging it? In that case, you should use this attenuator, which reduces the audio level by 50 dB.
Looking for a means to attach your Shure RPM400 preamp to something other than your belt? The SHure RPM40PREMNT lets you attach this preamp wherever you want!
Short spiral cable (30 cm) from TA3F to XLR for audio connections.
Premium LEMO instrument cable for guitar, bass guitar and more.
Premium angled 0.9-metre LEMO guitar cable for Shure ADX1M bodypack.
Premium 1/4"-to-TA4F cable for guitar and bass, with lockable connector.
GSM-resistant TA4F connector for use with Shure bodypacks.
Set of 5 multi-coloured ID rings for Shure ULX-D and QLX-D wireless transmitters.
In-line mute switch for easy muting of 2 bodypack transmitters.
Replacement kit for the Shure CVL-B/C-TQG lavalier microphone, including clip and foam windshields.
Replacement kit with clip and 2 foam wind screens for the PGA31 headset microphone.
Dual network charging station for Shure wireless microphones and batteries.
Dual network charging station for Shure wireless microphones and batteries, without power supply.
Compact network charging station for ULXD6 or ULXD8 transmitters with two charging compartments.
Network charging station with 4 slots for ULXD6 and ULXD8 transmitters. Convenient for charging several transmitters at the same time.
Network charger for up to eight ULXD6 and ULXD8 transmitters with SB900C battery.
Lithium-ion battery for the Shure ADX1 transmitter, 2200 mAh capacity.
Rechargeable lithium-ion battery for the Shure ADX1M transmitter.
Charging module especially for the Shure SB910 battery.
Charging module especially for the Shure SB910M battery, for efficient charging.
Charging module especially for the Shure SB920A battery, for reliable charging.
Network charging station for up to 8 SB910 or SB920A batteries, suitable for remote monitoring.
Compact charging solution for 8 SB910M batteries with network functionality.
Network charging station for charging 2 SB910, SB920A or ADX transmitters.
Energy-efficient 15V DC in-line power supply for Shure equipment.
Shure rack charger for 8 batteries with network connection and display.
Rechargeable lithium-ion battery for the Shure ADX2 transmitter.
Charging module for use with Shure SBC210, AXT900, AXT903 and AXT904. Suitable for two SB900C batteries.
Portable battery charger for Shure SBM and SBC battery chargers. Quickly charges batteries up to 100%.
Passive antenna splitter for various Shure wireless receivers.
Filters
