These Visaton damping mats are made of polyester wool and boast outstanding damping quality. This set includes two 60 x 33-cm mats suitable for Hi-Fi speaker cabs.
Professional 15 µF MKT-A foil capatitor for speaker crossovers, axial design.
The Visaton EX 80 S dynamic exciter is basically a speaker without a diaphragm. It can be screwed or glued to a flat surface for sound reproduction and packs 50 Watts of power at 8 Ohms.
Visaton bipolar electrolytic capacitor for crossovers, 150 µF, 63 Vdc, 10% tolerance.
10-microfarad capacitor for professional speaker filters, suitable for high load capacity.
Visaton MKT-A 2.2 µF is a compact MKT capacitor for passive speaker filters and crossover projects, with a size of Ø10 x 30 mm.
Visaton MKT-A 22 µF is an MKT capacitor for passive speaker filters and crossover projects, with compact dimensions of Ø 27 x 45 mm.
Visaton MKT-A 3.3 µF is an MKT capacitor for passive speaker filters and crossover projects, with compact dimensions of Ø14 x 30 mm.
Visaton MKT-A 4.7 µF is an MKT capacitor for passive speaker filters and crossovers, with dimensions of Ø17 x 32 mm for compact installation.
Bipolar 100 µF capacitor suitable for loudspeaker filters and audio applications.
Bipolar electrolytic capacitor from Visaton, ideal for building or upgrading loudspeaker filters.
Bipolar electrolytic capacitor for passive crossover design, 22.0 µF, 63 Vdc, with compact dimensions of 10 x 25.5 mm.
Visaton MKT-A 33 µF is an MKT capacitor for passive speaker filters and crossovers, with a compact size of Ø30 x 55 mm for easy mounting.
Ceramic resistor of 10 watts and 22 ohms, ideal for efficiency adjustment of speakers in passive crossovers.
The Visaton Ex 45 S is a so-called electro-dynamic exciter: a mini-speaker designed to send sound waves across the surface it's been mounted via screws or handy adhesive pads.
Professional foil encoder for crossovers with low losses and high load capacity.
Self-adhesive foam gasket for moisture-proof mounting of the FRS 10 WP on flat, smooth surfaces.
Bipolar electrolytic capacitance of 33.0 µF and 63 V suitable for crossovers in loudspeakers.
Rubber gasket for waterproof mounting of the FR 16 WP 4 Ohm loudspeaker.
Ceramic resistor of 10 watts at 3.3 ohms, suitable for efficiency adjustment between speakers and passive crossovers.
Compact, weather-resistant horn loudspeaker with 8 Ohm impedance for professional installations and vehicles.
An electro-dynamic exciter, the Visaton EX 60 S is used to stimulate sound-waves across flat surfaces and can be screwed in place or secured using special adhesive pads.
Visaton's BSX 130 WP is an unusual woofer. Instead of sound, it physically transmits vibrations. As a result, you can feel bass instead of hear it. It is therefore perfect for cars.
The EX 30 S concerns a handy Exciter from Visaton. An exciter refers to a particularly compact speaker that stimulates sound waves in flat surfaces against which it is attached.
The Visaton Ex 60 S is a loudspeaker like no other; this compact exciter stimulates sound waves on flat surfaces against which it is attached. This is possible via adhesive pads, or by screwing the exciter.
As an electro-dynamic exciter, the Visaton EX 60 R is used to stimulate sound-waves across flat surfaces and can be screwed in place or secured using special adhesive pads.
With the Visaton Pad EX 60 R, you mount the EX 60 R - 8 Ohm edition on a flat surface without the need for additional fasteners. Please note: only suitable for flat surfaces.
Compact 12 mm Visaton MB 12-5V magnetic buzzer with solder pins, 88 dB output and wide temperature range for various electronics applications.
Compact Visaton MB 14 magnetic buzzer with solder pins, suitable for 12 VDC (9-16 VDC) applications. Delivers 80 dB at 0.1 m and resonates at 4000 Hz.
Professional, low-loss 47 µF axial film capacitor, ideal for high-quality loudspeaker filters.
Low-loss, high-load capacitor for professional loudspeaker filters.
Visaton MKT-A 56 µF is an MKT film capacitor for passive speaker filters and replacement, with a compact design of 16 mm diameter and 45 mm length.
Designed for professional crossovers, this foil capacitor combines low loss with high load capacity.
Professional foil capacitor for speaker filters with high load capacity and low losses.
The Visaton MKT-A 8.2 µF is a discrete MKT capacitor for passive speaker crossovers and DIY projects, with compact dimensions of 16 mm in diameter and 45 mm in length.
This 82 µF MKT capacitor from Visaton is ideal for filtering speakers in professional audio applications.
This 10-watt MOX resistor from Visaton optimises the efficiency of high-end speakers within passive crossovers, thanks to high power handling and low inductance.
Metal-oxide resistor of 10 Ohms and 10 Watts for adaptation of high-end speakers in passive crossovers.
This 10-watt, 15-ohm MOX resistor effortlessly tunes passive speakers to a crossover network.
Compact, metal oxide resistor from Visaton for adjusting speaker efficiency in passive crossovers.
With this 3.3 ohm metal oxide layer resistor, you easily tune the efficiency of high-end speakers to your passive crossover.
This 10-watt, 4.7-ohm MOX resistor from Visaton precisely tunes passive speakers for optimum performance in speaker filters and crossovers.
This metal MOX resistor is ideal for tuning the efficiency of high-end speakers in passive crossovers.
Self-adhesive pad for easy and secure placement of the EX 80 S exciter on flat surfaces.
Metal-oxide resistor of 10 watts and 8.2 ohms, ideal for efficiency adjustment in high-end speaker systems.
Self-adhesive mounting pad for easy attachment of the EX 30 S exciter to flat surfaces.
Double-sided 3M joint pad for mounting the EX 45 S exciter on flat surfaces.
Filters
Filters