This washer is an official spare part for 211 Series microphone arms.
If your microphone stand is not equipped with a boom arm and is fitted with a 3/8 inch thread, this telescopic boom arm is the ideal addition. The solid construction prevents your microphone from sliding down and reduces handling noise.
With this handy replacement screw, you don't have to buy an entirely new K&M stand. The screw is fitted for stands 21336, 21337 and 195/8.
The Konig & Meyer 18810 keyboard stand and the 18811 extension are very literally made for each other. Add this to your 18810 stand and you're adding a secure shelf for a laptop or extra keyboard.
This is Konig & Meyer 44110 support arm. Two of these arms can be used to mount a keyboard or other heavy chunk of gear to the wall at a 23-degree angle. Bear in mind that it's only compatible with slatwall systems or in combination with the K&M 44060 adapter.
Konig & Meyer's table clamp is fitted with a 3/8-inch thread connector, but also features 3 inputs for 1/4 and 3/8-inch threaded connectors.
The Konig & Meyer 44060 adapter was specifically designed to mount K&M SpaceWall product holders on a wall. Attach it to a wall by means of three screws, and it's easy to quickly exchange different product holders.
The Konig & Meyer 20005 microphone stand extension has a 3/8-inch screw thread and can be used to lengthen all standard mike stands by an extra 95cm.
This stacker (two arms) can be mounted onto a 18950 or 18953 keyboard stand, greatly expanding its functionality. It allows you to easy use an extra keyboard or a laptop, for instance.
This microphone stand extension adds an extra 130mm to any standard microphone stand and comes with a female 3/8" screw thread at one end and a male 3/8" screw thread at the other.
This separate set of arms allows you to replace your worn keyboard arm or to place an additional keyboard (or other device) on the Spider Pro.
Thanks to the K&M 21231 microphone boom pole you won't have to miss another word. This practical two-part telescopic microphone arm gives you a larger range for better recordings.
Made from aluminium and finished with a durable scratch-resistant coating, the König & Meyer monitor plate measures 245cm by 205mm and is compatible with mid-size studio monitors.
The ultra-short K&M 21431 mini boom arm can be used to solve an array of stage and studio problems. Finished with a 3/8 inch and 5/8 inch screw thread, this arm can be deployed to mike-up the overheads and amps with ease.
Screw the Konig & Meyer 24357 adapter plate to the back of your speaker before securing the whole thing to a compatible wall mount for a clean set-up.
Do you have a K&M 21436 or similar tripod, and are you missing the floor cap of one of the legs? The Konig & Meyer 22948 is the replacement floor cap!
The Konig & Meyer 23721 5/8" threaded bolt is specially designed to expand the functionality of a 23720 or 23723 model table clamp. By adding this bolt, you can even mount a microphone with matching a 5/8" screw thread.
Combined with a compatible wall bracket, the Konig & Meyer 24358 Adapter Panel 5 can be used to securely mount a studio monitor onto a wall.
Konig & Meyer's 18817 is a universal holder for keyboard stands. It has a 3/8-inch screw thread that allows you to attach items like a boom arm, an iPad holder or a sheet music stand, for instance.
The Konig & Meyer 25530 is an extra-long boom arm that can be set to any length between 87 and 155 centimetres, making it a solid option for an overhead stand.
The Konig & Meyer 14032 backrest is compatible with various K&M stools. It's finished in black, features synthetic leather and can be adjusted in terms of height and depth.
Pre-drilled with an M20 mounting hole, the Konig & Meyer 26700 is a solid and stable base plate made from moulded zinc and finished with protective felt strips.
The Konig & Meyer 18811 Stacker is literally made to complete your Konig & Meyer 18810 Omega keyboard stand. Add this to your 18810 stand and you're adding a secure shelf for a laptop or extra keyboard.
Upholstered with durable fabric, the Konig & Meyer 14033 backrest is compatible with various K&M drum thrones and stools.
This Konig & Meyer 18814 Adapter is a handy extension for Konig & Meyer keyboard stands from the Omega range. Easy to mount.
This base stand is perfect for fixed installations and/or creating your own microphone stands. Thanks to the 3/8-inch thread, you can screw a microphone clip or arm directly onto it.
This boom arm is fitted with 3/8 inch screw thread and a firm screw button. This is the ideal add-on for your microphone stand.
The Konig & Meyer 18873 add-on support is compatible with the Spider Pro keyboard stand and can be clamped onto the centre column of the stand.
The Konig & Meyer 26007 microphone stand tube combination is extra-long and therefore perfect for specific recording techniques and antenna set-ups.
The Konig & Meyer 12152 mouse holder can be secured to tubes measuring up to 30mm in diameter and comes complete with a mouse mat.
Clean up cables and complete a neat workstation by adding the König & Meyer 18808 cable management system to your Omega keyboard stand. This plate-steel 'box' is easily installed with just two screws.
Got a Konig & Meyer 18950 or 19853 keyboard stand that you've already expanded with the K&M 18952 and now want to upgrade with the K&M 18817 universal holder? In that case, you'll need this purpose-designed keyboard stand adapter.
Combine them with the König & Meyer 18811 Stacker, and this pair of extra-long support arms to accommodate a keyboard or peripheral unit with a maximum depth of 400mm, or 430mm when combined with the 18822 add-on.
This extension pole fits on K&M's 18868 laptop holder, which in turn fits the Baby Spider Pro or Spider Pro, allowing you to expand your keyboard stand.
This is Konig & Meyer's 211 boom arm for microphone stand - black.
Compatible with König & Meyer Omega keyboard stands, these supporting arms are just 264 millimetres long, making them ideal for narrower stage pianos and keyboard models.
Konig & Meyer's 23700 table clamp features a 3/8-inch threaded bolt and is highly versatile. It has a maximum clamp distance of 1.7 inches.
Add another tier to your 18940 or 18990 K&M keyboard stand with their practical 18941 Stacker (black). It can be adjusted to fit any keyboard and offers plenty of room and grip.
Designed to meet the VESA MIS -D 75/100mm standard, the König & Meyer 19615 Adapter Plate can be used to mount a range of equipment onto a wall or ceiling and can be combined with K&M 24471, 24496 and 19780 wall mounts and stand adapters.
This flange has pre-drilled holes and is therefore easy to mount on several surfaces. You can easily mount a gooseneck or microphone clip thanks to the 3/8 inch screw thread.
The Konig & Meyer 23721 3/8" threaded bolt is specially designed to expand the functionality of a 23720 or 23723 model table clamp. By adding this bolt, you could even mount an extra microphone.
K&M's 18805 lectern can be mounted on keyboard stands 18950, 18953 and 18810 Omega with the included 18817 holder. Ideal for a compact keyboard setup.
Filters
Filters