Tascam Model 16 16-Channel Mixer

Tascam Model 16 16-Channel Mixer
Product no: 9000-0055-7096 Bax Music Warranty: This product comes with a 3-year warranty.

General

The Tascam Model 16 is an all-in-one mixer that's based on the Model 24 but comes in a slightly smaller jacket. It's the perfect solution for small studio or live performance mixing applications since this mixing desk offers full analogue warmth plus the possibility to go digital. The Model 16 features a multi-track recorder, USB audio-interface, internal effects, clear mixing functionality, extensive routing options and Bluetooth for wireless audio streaming!

Sublime Audio Quality

This 16-channel mixer is equipped with 14 flexible inputs for all of your microphones, instruments and various other sound sources. Mic inputs 1 to 8 include Tascam's Ultra High Definition Discrete Architecture technology for pure, transparent and natural tone and an interference-free signal. At the push of a button, you can activate the low-cut filter to take any annoying grumble out of the signal and/or the in-line compressor and as a result, lift vocal quality to unprecedented heights.

Powerful 16-Track Digital Recorder

To optimally route your audio, you can use the three AUX buses (Monitor 1/Monitor 2/ Effects) to create three different mixes for stage monitoring applications or to accommodate any external gear such as outboard effects, signal processors, headphones mixers and more. There's a sub-group on-board with an additional stereo line-output to hook up an extra amp and you're even given the possibility to record your main mix directly to USB or SD media in crystal-clear 48 kHz/24-bit quality!

Specifications

Product features

Sustainable product	not specified
Number of mono channels	12
Number of stereo channels	2
Number of submasters	1
Type of mixer inputs	microphone input (XLR), balanced line input (TRS jack), Hi-Z input (TS jack), stereo line input (TRS mini-jack)
Type of mixer outputs	balanced line output (XLR)
Headphone output	yes
Inputs	2 channels
Number of auxiliaries	3 - 4
Built-in audio player	USB, SD(HC), Bluetooth
Built-in audio interface	USB (multi track)
Number of microphone inputs	9 - 12
19 inches	19-inch rack mount (not included)
Phantom power	yes
Volume control	knobs, faders, faders + knobs
Built-in mixer effects	reverb/delay/modulation, channel EQ, master EQ, channel compression
Type of mixer	studio / PA mixer
Built-in effects	yes

Weight and dimensions including packaging

Weight (incl. packaging)	10,7 kg
Dimensions (incl. packaging)	59,0 x 50,5 x 22,5 cm

Product specifications

Tascam Model 16, 16-channel multi-track recorder
recorder:
- supported media:
  - SD (512 MB – 2 GB)
  - SDHC (4–32 GB)
  - SDXC (64–128 GB)
  - Class 10 or higher
- file system: FAT16 (SD), FAT32 (SDHC), exFAT (SDXC)
- recording format: WAV (BWF, max. size: 2 GB)
- playback format: WAV (BWF)
- sampling frequency: 44.1 kHz, 48 kHz
- bit depth: 16/14 bit
- recording channels: 16 channels max (14 + stereo mix)
audio inputs & outputs:
- Microphone inputs (CH 1–8,9,11):
  - XLR-3-31, balanced
  - (1: GND, 2: HOT, 3: COLD)
  - maximum input level: +10 dBu
  - maximum input level 8dBu
  - minimum input level: +58 dBu
  - gain adjustable range: 0–50 dB
  - input impedance: 1.8 kΩ
- LINE inputs (CH 1–8):
  - 6.3-mm TRS phone jack, balanced
  - maximum input level: +22 dBu
  - nominal input level: +4 dBu
  - gain adjustable range:
    - –10 dB to +40 dB (CH 1–8)
    - –20 dB to +30 dB (CH 9, 11)
  - input impedance: 22 kΩ
- INSERT (CH 1–2):
  - 6.3-mm TRS phone jack
  - (Tip: Send, Ring: Return, Sleeve: GND)
  - nominal input level: +0 dBu
  - maximum input level: +18 dBu
  - input impedance: 10 kΩ
  - max. output level: +0 dBu
  - max. output level: +18 dBu
  - output impedance: 100 Ω
- STEREO inputs (CH 13-14):
  - RCA pin jack, unbalanced
  - stereo mini jack
  - maximum input level: + 8 dBv
  - nominal input level: + 10 dBv
  - input impedance: 10 kΩ
- main output:
  - XLR-3-32, balanced
  - (1: GND, 2: HOT, 3:COLD)
  - max. output level: +4 dBu
  - max. output level: +22 dBu
  - output impedance: 200 Ω
- SUB OUT, MONITOR, FX OUT, CONTROL ROOM:
  - OUT 6.3-mm TRS, balanced
  - (Tip: HOT, Ring: COLD, Sleeve: GND)
  - max. output level: +2 dBu
  - max. output level: +16 dBu
  - output impedance: 200 Ω
- PHONES OUT:
  - 6.3-mm stereo phone jack
    - maximum output power 80 mW + 80 mW (at 32 Ω)
- Channel EQ:
  - low cut: 100 Hz, –18 dB/Oct.
  - high (shelving): 12 kHz, ±15 dB
  - mid (peaking):
    - variable 100 Hz to 8 kHz, ±15 dB (Mono)
    - fixed 600 Hz, ±15 dB (Stereo)
    - Q = 0.55
  - low (shelving): 80 Hz, ±15 dB
- master EQ:
  - high (shelving): 10 kHz, ±15 dB
  - mid (wide) variable: 100 Hz to 8 kHz, ±15 dB (Mono), Q = 0.5
  - mid (narrow) variable: 100 Hz to 8 kHz, ±15 dB (Mono), Q = 5
- Footswitch connector:
  - 6.3-mm TS phone jack (Tascam genuine footswitch RC-1F recommended)
audio performance:
- residual output noise:
  - –100 dBu
  - (MAIN OUT, MAIN fader at min.)
- equivalent input noise (EIN):
  - –128 dBu
  - (Mono input channel @ 150 Ω, GAIN @ max.)
- total harmonic distortion (THD+N):
  - <0.01 % (MIC IN-> MAIN OUT, 1 kHz, GAIN at min., +10 dBu)
  - <0.004 % (MIC IN-> MAIN OUT, 1 kHz, GAIN at min., +4 dBu)
- frequency response:
  - analogue: 20 Hz to 30 kHz, +0.5/–1.0 dB
  - digital: 20 Hz to 20 kHz, +0.5/–1.0 dB
- channel crosstalk:
  - –80 dB
  - (1 kHz, PAN fully counter-clockwise / fully clockwise)
- maximum gain:
  - 74 dB (MIC to MAIN OUT)
  - 54 dB (MIC to INSERT OUT)
  - 74 dB (MIC to SUB OUT)
  - 79 dB (MIC to CR OUT)
  - 75 dB (MIC to MONITOR OUT)
  - 75 dB (MIC to FX OUT)
  - 24 dB (USB/SD to MAIN OUT)
  - (all EQs flat, PAN fully counter-clockwise / fully clockwise, GAIN knobs at max.)
- phantom power: DC, 48V
computer system requirements:
- Windows:
  - Windows 10 (32-bit, 64-bit)
  - Windows 8.1 (32-bit, 64-bit)
  - Windows 7 (32-bit SP1, 64-bit SP1)
  - compatible computers: Windows with USB 2.0 port(s) or higher
  - CPU: Dual Core, 2 GHz or more
  - RAM: 2 GB or more
  - drivers: USB Audio Class 2.0, ASIO 2.0, WDM (MME)
  - screen resolution: 1280 x 800 px or more
- Mac:
  - macOS Mojave (10.14)
  - macOS High Sierra (10.13)
  - macOS Sierra (10.12)
  - compatible computers: Apple Mac with USB 2.0 port(s) or higher
  - CPU: Dual Core, 2 GHz or more
  - memory: 2 GB or more
  - driver: Core Audio
  - screen resolution: 1280 x 800 px or more
- USB audio specifications:
  - sampling rate: 44.1kHz, 48kHz
  - bit depth: 16 bit/24 bit
  - max. channels: 16 inputs, 14 outputs
- Bluetooth® Version 5.0
  - output class:
    - Class 2
    - transmitting range: 10 metres (dependent on external factors)
  - supported profiles: A2DP, AVRCP
  - supported A2DP codecs: SBC, AAC
  - supported content protection: SCMS-T
other specifications:
- power: AC 100-240V, 50/60 Hz
- power consumption: 40 W
optimal operating temperature: 5-35 degrees Celsius
dimensions: 43.0 × 46.3 × 11.3 cm
weight: 7 kg
included:
- power cable,
- user manual + warranty certificate