Sennheiser e 945 Vocal Microphone + Cable and Stand

microphone impedance	300-349 ohms
Audio connector	3-pin XLR
On/Off Switch	No
Microphone weight	350-399 grams
microphone set	no
microphone accessories	microphone clip, bag / box

microphone impedance	300-349 ohms
Audio connector	3-pin XLR
On/Off Switch	No
Microphone weight	350-399 grams
microphone set	yes
microphone accessories	microphone clip, windshield, cable, stand, bag / box

microphone impedance	300-349 ohms
Audio connector	3-pin XLR
On/Off Switch	No
Microphone weight	350-399 grams
microphone set	yes
microphone accessories	microphone clip, stand, bag / box, headphone

Sennheiser e 945 Vocal Microphone + Cable and Stand
Product no: 9000-0057-7198 Bax Music Warranty: Sennheiser E 945 Dynamic Microphone This product comes with a 3-year warranty. Innox IVA 12 Microphone Stand (Black) This product comes with a manufacturing defects warranty. Devine MIC100/10 XLR Microphone/Signal Cable, 10m This product comes with a manufacturing defects warranty.

General

The Sennheiser e 945 is a top-of-the-range vocal microphone with a dynamic capsule. You don't leave a microphone like this dangling on the ground. That's why we've fixed a tripod for you. A cable is also included.

Specifications

1x Sennheiser E 945 Dynamic Microphone
The Sennheiser E 945 is a high-quality dynamic microphone with super-cardioid pickup pattern, making it insensitive to feedback. Produces a nice, full vocal sound at a short distance.

Product features

Sustainable product	not specified
Minimum frequency	40 - 49 Hz
Maximum frequency	18 - 18.9 kHz
Polar pattern	super cardioid
Maximum SPL	not specified
Microphone sensitivity (dBV/PA)	-54
Microphone impedance	300-349 ohms
Audio connector	3-pin XLR
On/Off Switch	No
Microphone weight	350-399 grams
Microphone set	no
Microphone accessories	microphone clip, bag / box

Weight and dimensions including packaging

Weight (incl. packaging)	664 gr
Dimensions (incl. packaging)	26,5 x 12,0 x 8,0 cm

Product specifications

rugged metal housing
advanced shockmount design
consistent on/off-axis response
'hum'-compensating coil
made in Germany
supplied including a carrying case and MZQ 800 microphone clamp
dynamic transducer principle
super-cardioid pickup pattern
frequency response: 40 to 18,000 Hz
sensitivity (free field, no load, 1 kHz): 2.0 mV / Pa = -54 dB (0 dB = 1 V / Pa) = -74 dB (0 dB = 1 V / ubar)
nominal impedance: 300 ohms
minimum terminating impedance of 1,000 ohms
XLR-3 connector
dimensions: 47 x 186 mm
weight: 364 g

1x Innox IVA 12 Microphone Stand (Black)
The Innox IVA 12 is a solid, pro-grade microphone stand equipped with a large, ergonomic tightening knob that allows you to adjust the height of the stand while the three legs have been finished with rubber feet, keeping the whole thing nice and stable.

Product features

Number of stands	1
Sustainable product	not specified
Microphone stand weight	2 - 3 kg
Boom arm	yes
Height adjustable	yes
Colour	black
Stand material	steel
Maximum height of stand	200 to 210 cm
Included stand accessories	none
Mininum stand height	not specified
Screw thread size	5/8 inch
Set	no
Construction	2-part telescopic
Type of stand	boom stand
Type of stand base	flat base feet
Type of vlogging accessory	microphone stand / clip

Weight and dimensions including packaging

Weight (incl. packaging)	2,0 kg
Dimensions (incl. packaging)	87,0 x 11,0 x 8,0 cm

Product specifications

professional microphone stand
equipped with three stand legs with rubber feet
freely adjustable height
screw thread: 5/8-inch
freely adjustable boom arm length
vertical telescopic tube, ideal for overhead microphone setups
large, ergonomic tightening knobs
practical, collapsible construction
equipped with a practical cable management system
length when folded: 860mm
required floor surface when unfolded: 600mm
maximum height in overhead position: 2m

1x Devine MIC100/10 XLR Microphone/Signal Cable, 10m
Close any huge XLR signal-based gap with this 10-metre microphone/signal cable from Devine! Equipped with durable plugs and wrapped up inside fully flexible and protective sheathing, the MIC100/10 ensures solid, reliable signal transfer.

Product features

(partially) coiled	no
Sustainable product	not specified
Right angled or straight	straight - straight
Colour	black
Length	10.00 m
Set	no
Audio connector	3-pin XLR
Type of vlogging accessory	cable

Weight and dimensions including packaging

Weight (incl. packaging)	498 gr
Dimensions (incl. packaging)	24,0 x 24,0 x 4,0 cm

Product specifications

XLR male - XLR female
can be used as a microphone cable or as an all-round signal cable
supple, rugged cable
high-grade connectors with locking option
connectors with pull relief to retain contact integrity
length: 10m
filling: cotton
oxygen-free copper
isolation diameter: 1.4mm
isolation colours: red and white
number of conductors: 2
inner conductor diameter: 0.226mm²
conductor dimensions: 20 x 0.12mm
helical sheathing: 0.12 x 64
cable diameter: 6mm
sheathing material: flexible PVC
operating temperature: -20 - +70°C
capacity @ 1 kHz:
- cond.-cond.: 131pF/m
- cond.-shield.: 178pF/m

Write a review

Gad July 17, 2024

Wrote the following about Devine MIC100/10 XLR Microphone/Signal Cable, 10m

Good quality, Customer service was very good and delivered within 3 days.
Thanks to bax music

Matthew W. February 14, 2021