Use this hook when you want to attach a large-size butterfly lock to your flight case. You easily mount this sturdy steel hook from Penn Elcom using the pre-drilled holes.
The Penn Elcom H7150/85 backplate is made for mounting and reinforcing a Penn Elcom H7150Z flight case handle.
Easily installed via the four pre-drilled 5mm screw holes, this Penn Elcom dish is made from 1.2mm thick steel and can be used to mount a standard D-sized XLR socket exactly where it's needed.
This rack strip is fashioned from 2.00mm steel and has a height of 20 U. Because it has mounting holes at 15mm intervals, you are free to mount any equipment you like.
This rack strip is fitted with 9.5mm punched holes and has 5mm mounting holes for attachment to a flight case. This rack strip is made of 2.0mm steel and has a height of 3 U.
You cannot do without this set of 100 T-nuts when you are building a flightcase. After all, you want to make sure that your equipment is safely stored. These T-nuts are fit for M8 bolts.
Each of the Penn Elcom rivets included in this pack of 100 has an embedded groove for secure, solid and reliable coupling. These rivets have an aluminium body, a steel mandrel, 5mm diameter, and 20mm length.
A neat finishing touch for a DIY flight case, the Penn Elcom H1025 corner handle has a recessed design to maximise efficiency and comfort while saving space.
This rack strip is fashioned from 2.0mm steel and has a height of 12 U.
This Penn Elcom double rack profile is 12U high and comes pre-drilled with holes at 15mm intervals for eased installation.
This zinc hinge with stay is equipped with eight pre-drilled holes with a diameter of 6.6 mm each. The hinge is 50 mm wide and 91.5 mm long.
Made from 1.2mm-thick steel, this Penn Elcom case corner has a 12mm internal radius and a neat and flat, stackable design.
The Penn Elcom B1131 brace bracket is made of 1.2mm-thick steel, features six pre-drilled mounting holes and measures 51.5 by 42mm. The internal radius is 1.5mm.
Each of the rivets included in this pack of 100 comes with an embedded groove for secure, solid and reliable coupling, has 4mm diameter and is 12mm long.
Slap this on your flight case and know exactly what's stowed inside once it reaches the venue. This purpose-designed tour label is 21cm wide, 15cm high and made of plastic so it can be wiped clean and reused.
This Penn Elcom designed blind plate is 2U high, made of 1.2mm-thick steel and has been perforated to support efficient ventilation.
If you are building a flight case for your valuable equipment, this edge extrusion is a great finishing touch. It is suited for plates with a thickness of 6.8 mm.
The Penn Elcom D2101 dish has been thoughtfully left un-punched so it can be customised to meet your needs. Made of steel, this plain dish is a durable finishing touch for a custom flight case.
The rack is made of 2.0mm steel and is 16 U high. As there is a hole every 15 mm, you can mount whatever device you want with this rack.
Don't forget this backplate from Penn Elcom when installing a built-in handle from the H7150Z series in your flight case. A sturdy steel plate with a zinc-coloured finish and equipped with ten mounting holes.
A secure finisher for any heavier self-build flight case, this Penn Elcom ball corner has a 5mm internal radius, is made from 1.8mm-thick steel and has a 30mm offset.
Designed to ensure the solid and secure installation of medium-sized flight case handles like the Penn Elcom H7151 or H7159, this backplate is made from 0.9mm-thick steel and comes in black.
This Polybloc by Penn Elcom measures 120 x 200 cm and is 10 mm thick. It's perfect for using as the interior panelling on a flight case to keep the contents safe from bumps and shocks.
This heavy-duty rack mount drawer by Penn Elcom is equipped with a slam lock, a key lock and an integrated front pull handle. The ball bearings ensure that it opens and closes smoothly.
Each of the Penn Elcom rivets included in this pack of 100 has an embedded groove for secure, solid and reliable coupling. These rivets have an aluminium body, a steel mandrel, 5mm diameter, and 16mm length.
Designed for finishing off a DIY rack or flight case, the Penn Elcom H1050z handle features a dual spring-loaded mechanism and a recessed design to complete a neat job.
This double rack profile from Penn Elcom has punched holes every 15 millimetres, making it very easy to install your equipment in your desired location. It has a height of 20 units.
The Penn Elcom D023K dish comes punched with two holes for Neutrik D-Series connectors, including XLR, Speakon and RJ45 ports.
This Penn Elcom butterfly lock is provided with 5mm mounting holes and the dish is 15.5 mm deep. The lock is fitted with a kickout spring.
Bearing outstanding design and build quality, the Penn Elcom P1945N hinge features a stop mechanism to give the lid of any DIY flight case or rack an ultra-secure finish.
This Penn Elcom Polybloc measures 120 x 200cm and is 20mm thick. It's perfect to use as interior panelling for a flight case to keep the contents safe from bumps and shocks.
This recessed bar handle is made of 0.9 mm thick steel and has a black colour. Easy to build into one of your speaker cabinets. It is 63 mm deep and equipped with twelve pre-drilled holes with a diameter of 5.5 mm each.
This black corner castor wheel from Penn Elcom has pre-drilled mounting holes and can be effortlessly fitted to a custom-made flight case. Made of steel, the W2060 edge castor has a 64mm diameter and a 40kg weight bearing capacity.
The rack is made of 2.0mm steel and is 10 U high. As there is a hole every 15 mm, you can mount whatever device you want with this rack.
This strap handle is made of rubber and steel. It can be mounted easily to your flightcase!
Penn Elcom's H1430 is a reliable black flight case handle with nickel fittings. The handle is 15.6 cm long and 6.3 cm in height.
Synthetic pocket handle for speaker cabinets. Has a 102 x 59mm cutout and is equipped with four pre-drilled holes with a diameter of 4.5 mm each.
The leather-look of this Penn Elcom designed handle adds a deluxe touch to any custom flight case. The handle is easy to install thanks to nickel-finished mounting plates.
Need a sturdy hinge with a built-in stay to finish a custom flight case? The Penn Elcom P1955S is perfect for heavier lids.
This dish is not perforated and can therefore be used for many applications. It is fitted with four pre-drilled holes with a diameter of 5 mm each so you can start stacking or mounting straight away.
This is a black-finished, spring-loaded mountable handle from Penn Elcom. It's made of quality steel and features six mounting pre-drilled holes for easy installation.
Add several of these aluminium protective corners to your flight case to keep it held together nicely and protected against bumps during transport.
Designed for fully customising the interior of a flight case to protect more sensitive gear from shocks and knocks, this thick sheet of foam can be cut to size and comes with Penn Elcom's mark of quality.
This Polybloc by Penn Elcom measures 120 by 200 centimetres and is 10mm thick. It's perfect for lining the interior of a flight case and helps keep the contents safe from bumps and shocks.
Easily mounted onto any 19-inch rack, this Penn Elcom tie-bar neatens up that nest of cables for a clean and professional finish.
Give your DIY flightcase the finishing touch with this aluminium extrusion. The Penn Elcom 0522 is ideal for DIY flightcases.
This rack strip is fashioned from 2mm steel and has a height of 8 U.
The Penn Elcom H1078z flight case handle is easily installed via the pre-drilled holes and comes finished with a comfy rubber grip and a spring-loaded mechanism to keep it neatly tucked in after use.
Filters
Filters