The Penn Elcom H1078k flight case handle is easily installed via the pre-drilled holes and comes finished with a comfy rubber grip and a spring-loaded mechanism to keep it neatly tucked in after use.
This zinc dish, with a pre-punched hole, can be mounted to to your preference. You can provide it with an XLR D connector. Thanks to the pre-drilled holes you can use it immediately.
Build smooth-rolling drawers into a rack with this pair of Penn Elcom-designed drawer rails. Made from solid steel, these rails can bear up to 45 kilos and slide out for a total length of 902mm.
The Penn Elcom FP02Q-3U is a super-silent, dual-fan ventilation unit designed to be mounted in a 19" rack.
With this soft foam, you can rest assured that your gear will be transported safely from A to B. This anthracite-coloured foam is 50 mm thick.
Looking for a way to turn a flight case into a table? This Penn Elcom designed table leg is the solution. Combine it with some Penn Elcom table mounting latches and there you go!
This foam can be placed to lid of a flightcase. In this way, you can clamp your equipment tightly without it getting damaged. This foam is 50 mm thick.
This Penn Elcom-made 4U Rack Shelf has been forged out of steel and finished with a black powder coating. Mounted in a 19" rack, it's the perfect place for a laptop or other outboard gear.
Max-out the functionality of your flight case by installing this set of table latches and set up the case lid as a neat side table.
Penn Elcom's butterfly lock MOL3, equipped with an advanced mechanism, allows your flight case to close easily even under the most challenging conditions. Equipped with resistance and 10 mm deep.
This Penn Elcom-made foam-plastic panel is made to line any self-build flight case. While it's not completely shock-resistant, this 5mm thick Polybloc can provide a neatly finished interior.
This corner caster from Penn Elcom features an injection-moulded metal housing finished with a heavy-duty blue rubber wheel that measures 75mm in diameter and has a 35mm profile.
Compatible with any 19 inch rack, this ultra-strong Penn Elcom shelf is 1U high, 180mm deep, and comes finished with a rear lip to keep your gear and accessories in place.
Perfect for polishing off a self-build flight case, this sheet of Penn Elcom Alveobloc is 15mm thick, 120cm wide and 200cm long. Cut it to size for a custom fit, and set up your gear with optimum protection.
This medium steel ball corner from Penn Elcom has two mounting holes per leg, a PennBrite™ finish and a 1.2mm internal radius.
Designed and built by Penn Elcom, this neat 1U rack mount bracket can be quickly and easily installed in any 19 inch rack, secured to a desk, or mounted onto a wall.
This dish has two punched D-size holes for XLR connectors and is suited for build-in purposes. It has four 5mm mounting holes and is made of 1.2mm-thick black steel.
Load heavier gear in and out with smooth ease by equipping your flight case with this Penn Elcom designed retractable trolley handle with wheels.
This cage nut insertion/extraction tool from Penn Elcom is indispensable if you're always fitting and removing cage nuts. It also makes things safer as well as simpler.
This rack panel is made from 1.2 mm steel and comes with four mounting holes. This 19 inch panel is 0.5U high.
This dish is not perforated and can therefore be used for a variety of applications. You can use it for the top of your flight case, for stacking purposes, for instance.
The Penn Elcom 6020 aluminium rack profile is designed to complete a cage-nut based sliding system. This profile is 100cm long, 25mm wide, and 25mm deep.
This ultra-rugged black bar handle is made of ABS. Build this bar handle into your speaker cabinet for easy transport. This handle has a depth of 58.8 mm and is fitted with 8 mounting holes.
The Penn Elcom H1013 is a black strap handle that can be mounted on your DIY flight case. It's made of a plastic strip with metal ends that can be covered using the included plastic caps.
This Penn Elcom fixed castor wheel has a steel housing and can handle up to 40kg loads - the perfect finisher for a self-build flight case.
This lid profile from Penn Elcom is from the N-Case range. When you are building your own flight case, solid profiles are a must.
With this soft foam, you can rest assured that your gear will be transported from A to B, safely. This foam has a gauge of 20 mm and has an anthracite colour.
This Penn Elcom sliding rack tray with adjustable depth is made of 1.2 mm steel and is fitted with several fixing points. It can easily be mounted in one of your 19 inch racks.
This Polybloc by Penn Elcom measures 120 x 200 cm and is 20 mm thick. It's perfect for using as the interior panelling on a flight case to keep the contents safe from bumps and shocks.
This foam inlay can accommodate 7 microphones and has a build-in size of 430 by 320mm.
Perfect for polishing off a self-build flight case, this sheet of Penn Elcom Alveobloc is 80mm thick, 60cm wide and 100cm long. Cut it to size for a custom fit, and set up your gear with optimum protection.
What's the first thing you need to build a tight, powder-coated and ventilated rack rig? That's right: the Penn Elcom R2100/1U 19" rack box.
Penn Elcom's Polybloc is a thick, shock-absorbing foam sheet that can be cut to size as needed to line flight case interiors with a protective layer. This dense slab is 18mm thick and measures 120cm x 200cm.
Pad out your flight case or rack with a protective layer of foam using this customisable sheet of Penn Elcom Polybloc foam.
Want to line the interior of your custom flight case with shock-absorbing foam? Simple! Grab this 15mm-thick Penn Elcom Polybloc sheet and get started.
Easily keep your rack-mounted gear from overheating by installing this Penn Elcom designed ventilation panel. This panel is compatible with all standard 19 inch racks, is 1 unit high and comes finished in a black-powder coating.
Prevent any rack-mounted gear from overheating simply by installing this smart ventilation dish. Made from steel, this recessed dish has been perforated to aid airflow.
The Penn Elcom L0737 overlatch is a solid flight case locking mechanism. It's made of 0.9mm-thick steel, comes with pre-drilled mounting holes and has a 41mm hook length measured from the offset.
The Penn Elcom L0926-90k 90-degree catch plate is made of steel and is compatible with large Penn Elcom designed butterfly latches.
This Penn Elcom zinc piano hinge has two zinc plates with a width of 20 mm. The distance between the pre-drilled holes is 51 mm.
This ventilation dish provides an easy exit for heat from, for instance, your smoke machine. The dish is fashioned from 1.5 mm thick, zinc-coloured steel.
This Penn Elcom L0915 castor board catch plate fits 12mm-thick wood panels and comes finished in black.
Mount a Penn Elcom C1819 wrap-around corner on every corner of your custom speaker cabinet and ensure solid protection against knocks and bumps. This edition has a 12mm internal radius and a two-legged design with two 4mm mounting holes.
Swivel caster with an 80 mm diameter. Comes with four mounting holes and a zinc finish.
This angle extrusion protects your flight case against bumps during transport.
This aluminium extrusion puts the clean finishing touch on any self-built flight case. The Penn Elcom 0522 is 10.2mm thick and has been grooved along the entire 1.7-metre length.
Made by Penn Elcom, this 50cm thick panel of protective foam can be used to finish off any DIY flight case with shock absorbing padding.
Penn Elcom's 100mm-thick shock-absorbent foam Polybloc protects your valuable equipment from damage during transport.
Filters
Filters