Based on more than 21,240 customer reviews

Penn Elcom Flight Case Parts

(487)
Sort by:
Filters

Price range

(£0.00 - £250.00)

Type of Deal

  • 150 Spring Deals

Stock

  • 283 In stock online

Brand

Categories

Sustainable product

  • 487 not specified
Product specialists
Our specialists will give you the best possible service and are happy to offer excellent professional advice!
  • Rick Rick
  • Maarten Maarten
Special offers

Penn Elcom Polybloc 60mm (120 x 200cm)

Pad out your flight case or rack with a protective layer of foam using this customisable sheet of Penn Elcom Polybloc foam.

In stock at supplier
In stock at supplier
Order before 10pm = in about 7 working days at home
Recommended price £154
£107

Penn Elcom Automatic Locking Latch

Finish a custom rack or flight case with this Penn Elcom locking latch and be assured of solid security.

Delivery time unknown
Delivery time unknown
Recommended price £19.40
£8.70

Penn Elcom R1311-3A Cable Support Tie-Bar for 19" Rack, 133mm

Easily mounted onto any 19 inch rack, this Penn Elcom tie-bar neatens up that nest of cables for a clean and professional finish.

In stock at supplier
In stock at supplier
Order before 10pm = in about 7 working days at home
Recommended price £20.15
£6.80

Penn Elcom rubber foot 25 x 15 mm steel ring

Get a grip with this heavy-duty rubber foot. It's 15 mm thick., easy to mount and comes with a 5mm steel washer.

In stock at supplier
In stock at supplier
Order before 10pm = in about 7 working days at home
Recommended price £1.50
£0.84

Penn Elcom R1279/3Uk 3U Ventilation Panel (Single Panel)

Easily keep your rack-mounted gear from overheating by installing this Penn Elcom designed ventilation panel. This panel is compatible with all standard 19 inch racks, is 3 units high and comes finished in a black-powder coating.

In stock at supplier
In stock at supplier
Order before 10pm = in about 7 working days at home
Recommended price £19.25
£9.15

Penn Elcom Polybloc MG-8070/04 70mm (60 x 100cm)

Polish off the interior of any self-build flight case with the protective padding of 7cm-thick foam. This 60cm wide and 100cm long sheet can be cut to size, giving your expensive gear a custom fit.

In stock at supplier
In stock at supplier
Order before 10pm = in about 7 working days at home
Recommended price £60
£42

Penn Elcom ball corner 59 x 59 mm

This zinc-coloured Penn Elcom steel ball corner has three pre-drilled holes with a diameter of 5 mm each. It is 59 x 59 mm in size and is made of 1.5 mm thick steel.

In stock at supplier
In stock at supplier
Order before 10pm = in about 7 working days at home
Recommended price £2.81
£1.93

Penn Elcom H1028 Plastic Cabinet Handle (Black)

Made of black ABS plastic, this Penn Elcom cabinet handle can be grabbed from all four sides. It's comfortable to hold thanks to its large dimensions.

Order now and receive delivery within approx. 9 business days
Order now and receive delivery within approx. 9 business days
Recommended price £7.15
£6.80

Penn Elcom R2520-4U 19" rack mount wall bracket with hinged strip 4U

Thanks to the hinged rail on this cabinet for your 19-inch rack, you can easily reach everything. You simply turn the box to the side and do not have to move anything in the rack. Handy, isn't it?

In stock at supplier
In stock at supplier
Order before 10pm = in about 7 working days at home
Recommended price £120
£77

Penn Elcom H4114/NC2 pull-out handle

The N4114/NC2 is a 'pull-out' handle that you can attach yourself to a case. The handle can be pulled out to a length of 860 mm and is a suitable built-in to the N Case-2 system.

Delivery time unknown
Delivery time unknown
Recommended price £71
£66

Penn Elcom H1435k heavy-duty lifting eye (black)

A sturdy steel lifting eye in a black finish, this H1435k from Penn Elcom. It is fixed in a dish with four mounting holes and is fitted with a spring so it always folds back into the dish.

In stock at supplier
In stock at supplier
Order before 10pm = in about 7 working days at home
Recommended price £12.10
£10.50

Penn Elcom B1125s 4-Hole Brace, 40 x 30mm

This Penn Elcom brace features four 5mm pre-drilled holes and comes with rounded corners and a stainless steel finish. Dimensions: 40 x 30mm.

In stock at supplier
In stock at supplier
Order before 10pm = in about 7 working days at home
Recommended price £2.95
£2.47

Penn Elcom R2414k 350mm Drawer Rails (2x, Black)

Build smooth-rolling drawers into a rack with this pair of Penn Elcom-designed drawer rails. Made from solid steel, these rails can bear up to 45 kilos and slide out for a total length of 702mm.

In stock at supplier
In stock at supplier
Order before 10pm = in about 7 working days at home
Recommended price £13.10
£10.40

Penn Elcom RG-6145-03 Double 3U Rack Profile (2 mm steel)

This Penn Elcom double rack profile is 3U high and comes pre-drilled with holes at 15mm intervals for eased installation.

Delivery time unknown
Delivery time unknown
Recommended price £21.70
£5.50

Penn Elcom R2510-3U Wall/Table Rack Mount Bracket (3U)

Designed and built by Penn Elcom, this neat three-unit-high rack mount can be quickly and easily installed in any 19 inch rack, secured to a desk, or mounted onto a wall.

In stock at supplier
In stock at supplier
Order before 10pm = in about 7 working days at home
Recommended price £43
£30

Penn Elcom Polybloc MG-8099/04 100mm (60 x 100cm)

Thick and shock-absorbant, this 100mm-thick sheet of Penn Elcom Polybloc foam can be used to customise a flight case and protect your valuable equipment from damage during transport.

In stock at supplier
In stock at supplier
Order before 10pm = in about 7 working days at home
Recommended price £67
£57

Penn Elcom C1339/30k Large Offset Heavy-Duty Ball Corner (Black)

Building your own black-edition flight case? Finish it in style with the Penn Elcom C1339/30K black ball corner. Made of 1.8mm-thick steel, this strong three-legged ball corner has an internal radius of 2.5mm and a 30mm offset. Each leg has two 5mm mounting holes.

In stock at supplier
In stock at supplier
Order before 10pm = in about 7 working days at home
Recommended price £4.01
£2.37

Penn Elcom P1995K Large Slide-Lock Hinge (Black)

Bearing outstanding design and build quality, the Penn Elcom P1995K hinge features a slide-lock to give any DIY flight case or rack an ultra-secure finish.

In stock at supplier
In stock at supplier
Order before 10pm = in about 7 working days at home
Recommended price £9.45
£4.70

Penn Elcom R2416k Rack Drawer Rails, 400mm (Black, Set of 2)

Build smooth-rolling drawers into a rack with this pair of Penn Elcom-designed drawer rails. Made from solid steel, these rails can bear up to 45 kilos and slide out for a total length of 802mm.

In stock at supplier
In stock at supplier
Order before 10pm = in about 7 working days at home
Recommended price £14.35
£10.50

Penn Elcom Polybloc MG-8090/04 90 mm (60 x 100 cm)

Building your own flight case? Don't forget the interior lining of the case! With Penn Elcom Alveobloc, you are assured of optimum shock and impact absorption.

In stock at supplier
In stock at supplier
Order before 10pm = in about 7 working days at home
Recommended price £67
£52

Penn Elcom rack frame

This rack frame is made of 1.5-millimetre-thick steel and can be built into a 19-inch rack.

In stock at supplier
In stock at supplier
Order before 10pm = in about 7 working days at home
Recommended price £60
£45

Penn Elcom R1194/2Uk-180 2U Rack Shelf

Strong and secure support courtesy of Penn Elcom. This steel rack shelf features a raised rear lip to keep gear in place, is two units high and has a 181.5mm installation depth.

In stock at supplier
In stock at supplier
Order before 10pm = in about 7 working days at home
Recommended price £39
£23.30

Penn Elcom AAY0327 Internal Mounting Point

A handy addition when building custom flight cases or rack installations, the Penn Elcom AAY0327 internal mounting point is made from zinc-finished steel and punched with a pre-threaded M10 hole.

In stock at supplier
In stock at supplier
Order before 10pm = in about 7 working days at home
Recommended price £5.40
£3.58

Penn Elcom NC2C3K Flight Case Corner

The Penn Elcom NC2C3K three-legged corner is perfectly compatible with NC2DAE double extrusions and increases the strength of your custom-made flight case.

In stock at supplier
In stock at supplier
Order before 10pm = in about 7 working days at home

Penn Elcom R2410k Drawer slides 250 mm (pair)

You obviously can't build drawers into your rack without drawer slides. These from Penn Elcom are made of sturdy steel with a total load capacity of 45 kilos and you slide them out to a total length of 502 millimetres.

In stock at supplier
In stock at supplier
Order before 10pm = in about 7 working days at home
Recommended price £10.50
£7.20

Penn Elcom AF-F12 cleanable dust cover for FP02Q-3U (set of 2)

This washable dust filter from Penn Elcom is very easy to place over the FP02Q-3U fan or most other fans from this brand, thanks to its four magnets. It comes in a pair.

In stock at supplier
In stock at supplier
Order before 10pm = in about 7 working days at home
Recommended price £102
£30

Penn Elcom WG-5222 Fixed Castor Wheel, 50mm (Grey)

Safely shift gear between A and B with smooth ease thanks to this Penn Elcom designed swivel castor wheel. This wheel has a 50mm diameter and can bear up to 40 kilograms.

In stock at supplier
In stock at supplier
Order before 10pm = in about 7 working days at home
Recommended price £8.95
£4.22

Penn Elcom H1052S Spring-Loaded Flight Case Handle

The cambered design of the Penn Elcom H1052S spring-loaded fight case handle is far easier to install than a recessed handle, especially since it comes pre-drilled with six screw holes.

In stock at supplier
In stock at supplier
Order before 10pm = in about 7 working days at home
Recommended price £16.55
£13.80

Penn Elcom W0093 wheel plate for Penn Elcom W0985/80 and W0990/80

Penn Elcom has intended this wheel plate for casters W0985/80 and W0990/80 so these fit perfectly. Likewise, the mounting holes are placed in the same configuration as those of the wheel.

In stock at supplier
In stock at supplier
Order before 10pm = in about 7 working days at home
Recommended price £7.70
£6.70

Penn Elcom R2510-2U 2U Desk or Wall Rack Mount Bracket

Designed and built by Penn Elcom, this neat two-unit-high rack mount can be quickly and easily installed in any 19 inch rack, secured to a desk, or mounted onto a wall.

In stock at supplier
In stock at supplier
Order before 10pm = in about 7 working days at home
Recommended price £37
£27

Penn Elcom W0094 W0985 and W0990 Wheel Plate

Specially designed for Penn Elcom W0985 and W0990 castor wheels, the W009 wheel plate is made from solid aluminium and comes pre-drilled with mounting holes configured to match the base of a castor wheel.

In stock at supplier
In stock at supplier
Order before 10pm = in about 7 working days at home
Recommended price £7.95
£6.70

Penn Elcom L0968z overlatch

This is a sturdy skip lock set in a standard, 1.2mm thick steel dish. Overall length: 178 mm, width: 102 mm.

In stock at supplier
In stock at supplier
Order before 10pm = in about 7 working days at home
Recommended price £14.70
£13.30

Penn Elcom C1339/31z 1.8mm 30/30 R2 Stackable Ball Corner

Built to meet professional standards, this Penn Elcom ball corner has a 30/30mm recess, a 2.5mm internal radius and a three-leg construction, each pre-drilled with two mounting holes.

In stock at supplier
In stock at supplier
Order before 10pm = in about 7 working days at home
Recommended price £4.80
£3.19

Penn Elcom L0915-15k Castor board catch plate (fits 18 mm wood), black

Make sure your flight case is firmly fixed to your wheel plate using a lock holder like this one from Penn Elcom. This version comes in matt black and fits 18-millimetre-thick wood.

In stock at supplier
In stock at supplier
Order before 10pm = in about 7 working days at home
Recommended price £2.78
£1.42

Penn Elcom HG-4083 Trolley Handle for Self-Build Case

Combine this pull-out trolley handle with a set of wheels and complete the ultimate touring flight case.

In stock at supplier
In stock at supplier
Order before 10pm = in about 7 working days at home
Recommended price £23.30
£18.95

Penn Elcom 3130S hinge with lid stay for N Case systems

This 3130S stopper hinge from Penn Elcom is among other things suitable for making N-Cases, a self-build concept for customising cases and cases. The hinge is made of steel and has a black colour.

In stock at supplier
In stock at supplier
Order before 10pm = in about 7 working days at home
Recommended price £5.75
£2.63

Penn Elcom H1009 handle strap with plastic fixings, black

This handle from Penn Elcom is a straphandle and is made of plastic with steel ends, over which plastic caps are placed.

In stock at supplier
In stock at supplier
Order before 10pm = in about 7 working days at home
Recommended price £4.80
£2.69

Penn Elcom R8840/18 Rack Shelf-Support for R8800 System (450 mm, One Unit)

Use the R8840/18 shelf-support from Penn Elcom to reinforce and give an amplifier a stable position in your personalised R8800 anti-vibration rack mounting system.

In stock at supplier
In stock at supplier
Order before 10pm = in about 7 working days at home
Recommended price £9
£7.50

Penn Elcom LE-9288 panel roto lock

Penn Elcom's LE-9288 is a panel lock with rotary lock. The lock consists of two separate parts that gradually attract each other. Suitable for heavy-duty use and has a high tensile load.

Delivery time unknown
Delivery time unknown
Recommended price £14
£10.30

Penn Elcom D2115z Tour Label Dish (Zinc)

When it comes to touring, preparation and organisation are key. As such, it's never a bad idea to furnish your flight case with this tour label dish from Penn Elcom so you always know exactly what's (supposed to be) inside.

In stock at supplier
In stock at supplier
Order before 10pm = in about 7 working days at home
Recommended price £6.45
£5.70

Penn Elcom B1115z corner bracket, 63x24 mm

With this B1115z, you are assured of a high-quality oversight angle. It is made of metal and has two pre-drilled holes. The ends of the oversight angle are nicely rounded and the metal is 1.4 mm thick.

In stock at supplier
In stock at supplier
Order before 10pm = in about 7 working days at home

Penn Elcom D2117k Tour Label Dish, 29 x 19cm (Black)

When it comes to touring, preparation and organisation are key. As such, it's never a bad idea to furnish your flight case with this tour label dish from Penn Elcom so you always know exactly what's (supposed to be) inside.

In stock at supplier
In stock at supplier
Order before 10pm = in about 7 working days at home
Recommended price £18.45
£12.80

Penn Elcom B1125k Corner Brace (29 x 40mm)

This corner brace from Penn Elcom is made of 1.2mm-thick steel, features rounded corners and measures 29 by 40mm. The internal radius is 2mm.

In stock at supplier
In stock at supplier
Order before 10pm = in about 7 working days at home
Recommended price £1.94
£1.67

Penn Elcom C0651z ball corner 80 x 80 mm R2 with 30/30 offset

Guard the corners of your flight case from impacts with ball corners like this one from Penn Elcom. It is made of sturdy steel, has six pre-drilled holes for mounting and an offset for a 30/30 profile.

In stock at supplier
In stock at supplier
Order before 10pm = in about 7 working days at home
Recommended price £4.56
£3.07

Penn Elcom C1374z R2 Brace Ball Corner, 78mm

The Penn Elcom C1374/10z neatly combines a ball corner with a corner brace. The model is 78mm long, has a 4.5mm interior radius and comes pre-drilled with six 5mm mounting holes.

In stock at supplier
In stock at supplier
Order before 10pm = in about 7 working days at home
Recommended price £3.79
£3.06

Penn Elcom L0747/50z latch lock with lip, large, 50 mm

This sturdy skip lock from Penn Elcom is a great closure for your self-built flight case. This variant has a lip of 50 millimetres.

In stock at supplier
In stock at supplier
Order before 10pm = in about 7 working days at home
Recommended price £13.60
£10.30

Penn Elcom L0747/BP base plate for L0747 series latch lock

When fitting one of Penn Elcom's L0747 series skip closures, you will need this backplate. Made of sturdy steel and easy to assemble.

In stock at supplier
In stock at supplier
Order before 10pm = in about 7 working days at home
Recommended price £4.80
£2.94

Penn Elcom W8992 125mm Swivel Castor Wheel (Blue)

Pre-mounted onto a steel chassis complete with a smooth swivel system and easy-install mounting holes, this Penn Elcom castor wheel has a 125mm diameter and can carry up to 180 kilograms.

In stock at supplier
In stock at supplier
Order before 10pm = in about 7 working days at home
Recommended price £20.20
£19.90
To top
Compare your gear (1/10)