Set of two beech stands for dampening speaker vibrations and supporting VISATON horns and speaker cabinets.
Complete solution for home cinema and music, designed for optimal surround sound performance with multiple subwoofer proposals.
Universal epoxy PCB for 2-way crossovers; suitable for impedance correction and level adjustment.
Universal crossover board made of epoxy (1.6 mm) for 2- and 3-way systems, ideal for loudspeaker construction and repair.
Universal epoxy circuit board for building 2- to 4-way crossovers.
Compact structure-borne sound converter for mid and treble, easily mountable.
Ceramic 10W 1-Ohm resistor for efficient speaker and crossover adjustment.
Visaton bipolar electrolytic capacitor for crossovers, 150 µF, 63 Vdc, 10% tolerance.
Reliable 220 µF bipolar capacitor for building loudspeaker filters and crossovers.
Bipolar electrolytic capacitance of 33.0 µF and 63 V suitable for crossovers in loudspeakers.
Bipolar electrolytic capacitor of 330.0 µF, ideal for building loudspeaker filters with reliable performance.
470 µF bipolar electrolytic capacitor, ideal for loudspeaker filters and crossovers.
High-quality bipolar electrolytic capacitor, ideal for building or repairing loudspeaker filters.
Ceramic resistor (10 W, 1.5 ohms) for efficient matching of speakers to passive crossovers, resistant to high temperatures.
Ceramic resistor of 10 ohms and 10 watts, suitable as a speaker component when repairing or tuning audio systems.
Compact ceramic resistor for efficient speaker tuning on passive crossovers.
This ceramic resistor from Visaton is ideal for adjusting the efficiency of speakers in passive crossovers.
Ceramic resistor of 10 watts at 3.3 ohms, suitable for efficiency adjustment between speakers and passive crossovers.
Ceramic resistor of 10 watts and 4.7 ohms, suitable for adjustment of speaker efficiency in passive crossovers.
Ceramic resistor of 10 watts and 6.8 ohms for efficient speaker matching.
Ceramic resistor of 10 watts and 8.2 ohms for efficient tuning of speakers in passive crossovers.
Compact, weather-resistant horn loudspeaker with 8 Ohm impedance for professional installations and vehicles.
Spacer ring for reducing the installation depth of PL 7 RV 4 and 8 Ohm loudspeakers.
Plastic spacer ring for the DR PL 7 RV 4 Ohm and 8 Ohm loudspeaker models, finished in black.
Plastic spacer in black for the PL 8 RV, ideal as a mounting aid for loudspeaker installations.
Waterproof exciter (IP65) for sound reproduction through panels, ideal where ordinary speakers cannot be used.
Steel protective cover for DL 18/1 and DL 18/2, with two cable entries - not suitable for F30 fire-resistant ceilings.
Steel protective cover for DL 18/1 and DL 18/2, with convenient mounting convenience and extra sound volume.
Mounting sleeves for securely attaching a cover frame to a loudspeaker baffle; set includes male and female connectors.
Waterproof seal for mounting your Visaton FR 10 WP loudspeaker.
Original sealing ring for waterproof mounting of the Visaton FR 13 WP 4 OHM loudspeaker.
Suitable for waterproof mounting of various FR 8 WP 4 and 8 Ohm loudspeaker models.
You can use the Visaton Pad EX 60 S to attach the EX 60 S - 4 Ohm and 8 Ohm edition to a flat surface without the need for other fasteners. Note: suitable for flat surfaces only.
Replacement 14.8V Li-ion battery (6700 mAh) for the LD Systems ANNY 12, with 4-led charge indicator and up to 12.5 hours of use per battery in ECO mode.
Kit out your Yamaha Stagepas 200 with the compatible Yamaha BTR-STP200 battery pack and you kit yourself out with a fully portable system. This battery has enough capacity to deliver 8 to 10 hours of performance.
Electro-Voice SPP Amplifier Knob Red ELX A. This is a spare knob that allows you to adjust the volume of your ELX active speaker.
This battery clip is fully compatible with the Roland BA-55, AC-33 and CUBE Street EX speakers.
Electro-Voice F.01U.303.731 Control/Master Volume Knob spare part for ZLX Series
The Electro-Voice WC-58W is a handy cap set that allows you to protect the EVID-5.2 and EVID-8.2 speakers from the rain. Handy when hanging them outside. Available in white.
This DAP Audio PCB is a replacement printed circuit board for the DAP Audio Club Mate II subwoofer.
This rubber foot is the DE base for every Genelec 8040 monitor. It offers a solid base for your speaker and also helps with acoustic decoupling.
The TC-ZX allows you to modify your Electro-Voice ZX1i speakers to be even more weather-resistant.
The TC-ZXW lets you modify your Electro-Voice ZX1i speakers to be even more weather-resistant.
The TC-4B is a cover for the connectors of Electro-Voice's EVID 4.2 loudspeaker.
The TC-4W is a cover for the connectors of Electro-Voice's EVID 4.2 loudspeaker.
Electro-Voice's TC-6B is a cover cap to protect the connectors of EVID 6.2 speakers from water.
Electro-Voice's WC-PB is a cover for the connectors of the P6.2 pendant speaker from Electro-Voice's EVID series.
