Innox SynthStand 02 Korg Volca Keys + Kick + FM 2 set

Service promise

Innox SynthStand 02 Keyboard/Controller Stand This product comes with a 3-year warranty.

This product comes with a 3-year warranty.

Korg Volca Keys Synthesizer This product comes with a 3-year warranty.

This product comes with a 3-year warranty.

Korg Volca Kick analogue kick generator This product comes with a 3-year warranty.

This product comes with a 3-year warranty.

Korg Volca FM 2 Synthesizer This product comes with a 3-year warranty.

This product comes with a 3-year warranty.

MyVolts Power Splitter Cable Black + PSU for Korg Volca This product comes with a 3-year warranty.

This product comes with a 3-year warranty.

Specifications

1x Innox SynthStand 02 Keyboard/Controller Stand
The SynthStand 02 by Innox is specially designed to hold three compact synthesizers, keyboards or controllers. The width of this adaptable stand can be adjusted with ease, making it compatible with a wide range of different gear.

Product features

Keyboard stand levels	3
Weight capacity per keyboard shelf	not specified
Sustainable product	not specified
Keyboard stand type	other

Weight and dimensions including packaging

Weight (incl. packaging)	5,4 kg
Dimensions (incl. packaging)	46,0 x 46,0 x 5,0 cm

Product specifications

Innox SynthStand 02
synth/keyboard/controller stand
suitable for compact synthesizers, keyboards or controllers
display angle: 45 degrees
adjustable width: 18 - 29cm
depth of lower stand: 180 - 190mm
depth of upper stand: 140 - 150mm
depth of upper stand: 130 - 140mm

1x Korg Volca Keys Synthesizer
The retro look of the Korg Volca Keys are only the beginning: this tabletop instrument offers a pure synth experience. It features various wave form settings, portamento, delay and ADSR control.

Product features

19-inch rack size	not applicable
Number of keys	25
Arpeggiator/sequencer	none
Audio via USB	no
Control	none
Sustainable product	not specified
Synthesizer inputs	none
Sound source	analogue
MIDI & other	MIDI in, CV/gate in, CV/gate out
Synthesizer options	simple
Synthesizer outputs	headphone
Polyphony	not specified
Synthesizer kind	portable
Type of keys	touch-sensitive keys/pads
Vintage remake	no
Synthesizer type	portable gadget
Difficulty level	easy

Weight and dimensions including packaging

Weight (incl. packaging)	787 gr
Dimensions (incl. packaging)	27,0 x 16,0 x 8,0 cm

Product specifications

Korg Volca Keys analogue synthesizer
Tabletop size
Intuitive controls
27 ribbon keys
Polyphony: 3 voices
Step sequencer with memory function
Setups: Poly, Unison, Octave, Fifth, Unison Ring and Poly Ring
ADSR control
Portamento and delay
Self-tuning for a constant, stable pitch
LED display (4 digits)
Sync in/out for connection with Volca Keys and / or Volca Beats
Optional control via iPhone app (SyncKontrol)
MIDI IN (5-pole DIN)
Headphones output (stereo mini jack)
Built-in speaker
Power supply by 9V DC or battery
Dimensions: 193 x 115 x 46 mm
Weight: 377 gr (battery not included)

1x Korg Volca Kick analogue kick generator
The Volca Kick by Korg is engineered to emphasise the most important element in dance music: the kick.

Product features

Connector for external foot pedal	no
Number of analogue input channels	1
Number of analogue output channels	1
Sustainable product	not specified
Headphone output	yes
Sound source	analogue
Built-in speaker	no
MIDI & other	MIDI in
MIDI controller	no
Standalone	yes
Style	modern

Weight and dimensions including packaging

Weight (incl. packaging)	774 gr
Dimensions (incl. packaging)	26,0 x 15,0 x 7,0 cm

Product specifications

Korg Volca Kick
analogue kick generator
MS-20 resonator
1 voice
16-step sequencer
connectors:
- audio output: stereo mini jack
- sync I/O (2x mono jack)
- MIDI in
power supply:
- 6x AA batteries
- 9V adapter (not included)
battery lifespan: approx. 10 h
dimensions: 193 x 115 x 46 mm
weight (not including batteries): 377 g
included: 6x AA batteries, sync cable

1x Korg Volca FM 2 Synthesizer
We had to wait for it but now it's finally here: the Korg Volca FM 2. Fully DX7-compatible and housed in a humble desktop module, this fresh synth comes with double the polyphony, a built-in reverb effect, and more.

Product features

Sustainable product	not specified
Synthesizer kind	standard
Synthesizer options	extensive
Difficulty level	difficult
Vintage remake	no
Sound source	FM
Number of keys	27
Arpeggiator/sequencer	arpeggiator, sequencer
19-inch rack size	not applicable
Synthesizer type	desktop module
Type of keys	touch-sensitive keys/pads
Synthesizer inputs	none
Synthesizer outputs	headphone
MIDI & other	MIDI in (mini jack), MIDI out (mini jack)
Audio via USB	no
Control	none
Polyphony	6

Weight and dimensions including packaging

Weight (incl. packaging)	776 gr
Dimensions (incl. packaging)	26,5 x 15,5 x 7,0 cm

Product specifications

Korg Volca FM 2
synthesizer
polyphony: 6
synthesis: FM (DX7-compatible), 6-operators, 32 algorithms
preset storage: 64x
sync cable included
FM parameter list included
power:
- 6x AA batteries (included)
- Korg KA-350 power supply (not included)
dimensions: 193 x 115 x 40mm
weight: 360g (excluding batteries)

1x MyVolts Power Splitter Cable Black + PSU for Korg Volca
The MyVolts Power Splitter Cable allows you to power up to five Korg Volcas, doing away with the need for five separate power supplies.

Product features

Sustainable product	not specified
Power supply type	multi-power supply
Power supply plug	barrel 2.1 mm (inner diameter), barrel 5.5 mm (inner diameter)
Output voltage	9V
Total power	1000 mA
Centre positive/negative	centre positive
AC output	yes

Weight and dimensions including packaging

Weight (incl. packaging)	18 gr
Dimensions (incl. packaging)	30,0 x 17,0 x 4,5 cm

Product specifications

MyVolts Power Splitter Cable Black + PSU
for Korg Volca
- splitter cable
- power supply

Videos

1 / 5

Innox SynthStand 02 Keyboard/Controller Stand

Rubber trim reacted and fused with the plastic on my synths damaging them. Removed the trim and the top tier is out of alignment and the synth wobbles. If this wasn't an issue I would have bought many more of these. Will be replacing with something else.

December 13, 2025 | Lane, J

5 / 5

Innox SynthStand 02 Keyboard/Controller Stand

After reading the reviews for this product, I decided to buy this anyway, as it was so cheap. I figured I would be able to pick up some replacement screws from a DIY store.

I waited around 3 months for this to arrive, due to it being out of stock and when it did arrive, I could see no issues with the screws and I put it together in a matter of minutes. This must be a new batch and it also came with an extra set of tightening knobs. I can't really comment on the rubber trim. Only time will tell but due to the weight of the stand, they may fail. Who knows what it's like after it's fully loaded with synths but I don't see it as a deal breaker. I have a RYTM, Bass Bot and TR-09 set up, with there just being enough room for the cables.

A very sturdy stand and I would recommend this to all of my friends.

July 18, 2021 | Paul G.

4 / 5

Innox SynthStand 02 Keyboard/Controller Stand

Purchased stand recently for reface keyboard and a few desktop synths. Much better than using a desktop laptop stand and width can be extended. Only reason this does not get 5 is due to the loose rubber trimming. For a budget ranged desktop stand, you cannot go wrong.

September 8, 2020 | Bradkey85

3 / 5

Innox SynthStand 02 Keyboard/Controller Stand

Stand is very heavy and unsuitable for portable use. I had to raid my garage to find two screws for assembly as the ones provided are too short. Rubber trim falls off and needs to be glued in place. Once you overcome these problems it proves to be very sturdy for a home studio environment.

August 10, 2020 | Electrolad

4 / 5

Innox SynthStand 02 Keyboard/Controller Stand

Excellent. Very heavy, sturdy stands. Holding my 303s, Gilbert's and a 606 (I bought 2 of them). The rubber on the sides can be removed, but it's good in that it holds your gear in place / prevents it sliding side to side should you knock it slightly.

Definitely suits my needs to keep thing very secure.

June 17, 2020 | b_d

1 / 5

Innox SynthStand 02 Keyboard/Controller Stand

Very bad product first it came with short screws went to buy two new one !! verdict is rubish product I suggest build your own until someone will design properly not happy at all

March 28, 2020 | Raval

1 / 5

Innox SynthStand 02 Keyboard/Controller Stand

Wow. Just wow. I received an Innox Synthstand 02 in the post today and I'm floored. I was expecting it to be a little on the cheap side. But I didn't expect it to be this bad. Here's what I found:

The package is super heavy due to the thick slabs of steel for the side panels. I've never received a consumer product that's this heavy for its size. It feels irresponsible to purchase a product that so flagrantly wastes material. It also seems wasteful to spend resources shipping so much excess material across the globe.

Due to the excessive weight, this stand is for home/studio use only. This is not a "toss in your backpack on the way to the gig" stand.

The rubber trim constantly falls off as I handle the stand. It's a major nuisance.

The rubber trim caps on the tabs are very thin. I wouldn't be surprised if they tear eventually and fall off.

There are bits of dust and debris embedded in the paint. Very poor quality.

It's impossible to assemble the stand because the threaded knobs aren't long enough to reach the large diameter end of each tube. On the narrow end of each tube, the knobs just barely mate with the tube; I can only get 1 thread of engagement. This is a big no-no. There should be a minimum of 3 threads of engagement.

All in all, the product gives the impression of cheapness for cheapness's sake. I own a few stands of a similar design from another company and they work great. I thought the Innox stand would be a nice way of getting basically the same product for a lower price. Wrongo!

March 27, 2020 | SynthNut

5 / 5

Korg Volca Kick analogue kick generator

amazing piece of analogue gear, such a cheap price!, at the time I was looking to buy one Bax Music was the only one to have it on sale!!!

January 4, 2017 | Pawel R.

Reviews from other countries

2 / 5

Innox SynthStand 02 Keyboard/Controller Stand

Besoin d'être bricoler pour pouvoir installer mes instruments. Fiche technique à revoir pour donner plus d'infos sur les hauteurs de machines compatible.

August 6, 2026 | Johan B

This review was automatically translated from French.