With the Shure RPM40PC, it is possible to simply adjust the frequency response of your Shure TwinPlex microphone such that your voice has more presence in recordings and in sound reinforcement.
The Shure RPM40SM consists of 3 transparent Sticky Mounts, including adhesive. These allow you to mount your Shure TwinPlex tie-pin microphone anywhere you want!
The Shure RPM40SO is a kit consisting of 10 Standoffs for RPM40(S)TC Dual and Single tie pin clips. This kit is suitable for all TL40 lavalier microphones.
To clamp a single Shure TwinPlex TL40 tie-piping microphone, use a Shure RPM40STC tie-piping clamp. This is a set consisting of three tie pin clamps.
To clamp a single Shure TwinPlex TL40 tie-pipe microphone, use a Shure RPM40STC tie-pipe clamp. This is a set consisting of three tie pin clamps.
You can use Shure's Vampire Sticky Mounts to attach your TwinPlex TL40 or similar tie-pin microphones. This is a set of 3 Vampire Sticky Mounts.
To attach two Shure TwinPlex TL40 or similar lavaliers to your lapel, use the Shure RPM40TC Dual tie pin clamps. This is a set consisting of three clamps.
The Shure SBC10-903-PS charger accommodates a separately available SB903 battery for Shure's SLX-D series transmitters.
To clamp a single Shure TwinPlex TL40 tie-pipe microphone, use a Shure RPM40STC tie-pipe clamp. This is a set consisting of four tie pin clamps in four different colours.
The Shure RPM40TS gives you extra stickers for your Sticky Mounts! These double-sided sticky mounts are available in sets of 15, and sets of 50.
Ran out of adhesive stickers for your Sticky Mounts? Grab the Shure RPM40TS pack and replenish your stock with 50 fresh, double-sided adhesives.
The Shure RPM40VM Vampire Mounts are named after the unique way you can attach them to your clothing by the two sharp pins. This is a set of 3, suitable for a variety of tie-pin microphones!
Looking for additional or new windshields for your Shure TwinPlex TH or TL microphones? These Shure RPM40WS see fit for this purpose and available for every colour variation! This is a set of 5.
Looking for additional or new windshields for your Shure TwinPlex TH or TL microphones? These Shure RPM40WS see fit for this purpose and available for every colour variation! This is a colourful set of 8.
The Shure RPM50ES will make wearing your Shure TH53 headset just that little bit more comfortable. This is a set of Sleeves that you can slide around the ear hooks of your headset.
When the rod arm of your Shure TwinPlex TH53 headset microphone is damaged, of course you don't buy a completely new headset! Replace this rod arm with the RPM53/O spare part.
The Shure RPM53-CC is a spare part for Shure TwinPlex TH53 headset microphones.
The Shure RPM53-CF refers to the Cable Flex part of the Shure TwinPlex TH53B headset microphones. This is a set consisting of 3 of these parts.
If the frame of your precious Shure TwinPlex TH53 headset has become damaged, you can replace it with the RPM53-HF frame. This frame is available in three colour options for the perfect fit!
The Shure RPM53-CF refers to the Cable Flex part of the Shure TwinPlex TH53C headset microphones. This is a set consisting of 3 of these parts.
The Shure RPM53-CF refers to the Cable Flex part of the Shure TwinPlex TH53T headset microphones. This is a set consisting of 3 of these parts.
The Shure UA825-RSMA refers to an SMA coaxial cable with reverse polarity. It is possible to use this 7.6 cm cable to mount antennas at longer distances on GLX-D wireless systems.
Filters
