When the rod arm of your Shure TwinPlex TH53 headset microphone is damaged, of course you don't buy a completely new headset! Replace this rod arm with the RPM53/O spare part.
The Shure PA821B-E Antenna Combiner accommodates up to eight BNC antenna signals, combining them on a single internal antenna. The result is a cleaner RF network and cleaner 19 inch rack that's no longer bristling with antennas.
Are the standard windshields supplied with the Shure CVO overhead installation microphones worn out or lost? You can replace these with the Shure ACVO4WS windshields! These are supplied per 4.
Are the windshields supplied as standard with the Shure CVO overhead installation microphones worn out or lost? You can replace these with the Shure ACVO4WS windshields! These are supplied per 4.
The Shure UA850-RSMA refers to an SMA coaxial cable with reverse polarity. It is possible to use this 15.2 m cable to mount antennas at longer distances on GLX-D wireless systems.
The Shure UA825-RSMA refers to an SMA coaxial cable with reverse polarity. It is possible to use this 7.6 cm cable to mount antennas at longer distances on GLX-D wireless systems.
Shure UA8-174-216 1/2 wave dipole antenna part (174 - 216 MHz). This antenna is suitable for Axient, UHF-R, ULX-D, ULX, SLX and BLX4R receivers and PSM1000 and PSM900 transmitters of the same frequency.
The Shure HA-8091 Domed Helical antenna is a domed helical antenna that delivers unmatched, drop-out-free wireless performance for wireless in-ear monitor systems, microphone systems and intercoms.
The Shure WA445 refers to a threaded collar, a spare part for the WA430 and WA435 Connector Kits.
For Shure TwinPlex tie pin microphones with an MTQG connector, the Shure WA430 is a spare part, with a female MTQG (TA4F) connector.
This loose Shure WA416 connector covers the LEMO(3) microphone connector used on the Shure TL46, TL47 and Shure TL48 tie-pin microphones. The WA416 is also suitable for other 1.6 mm thick cables.
The Shure WA435 is a loose 5-pin MTQG (TA5F for Lectrosonics) Connector Kit that allows you to attach a TA5F connector to your TwinPlex tie-pipe microphone.
Shure UA700-V VHF beltpack antenna for ULX-D/QLX-D VHF beltpacks.
The Shure KSM11 is a condenser capsule for your Shure wireless system like you haven't heard before. Even under the most challenging conditions, your voice remains clear and in the foreground.
Shure MoveMic AMV-LAV-FUR Furry Windshield for MoveMic Clip-on Microphone
The Shure MoveMic AMV-LAV-WS/B set includes two black windshields for Shure's MoveMic wireless clip-on microphone.
The Shure MoveMic AMV-LAV-WS/W-KIT includes a set of windshields and matching clip covers for Shure's MoveMic wireless lavalier microphone system.
The Shure MoveMic Magnetic Mount offers an alternative mounting method for your MoveMic microphone. Instead of a peg, the Magnetic Mount uses a metal plate and a magnet.
The Shure AMV88-WS is a windshield that comes standard with the Shure Motiv MV88 microphone. It is therefore a spare part.
The Shure RPM50ES will make wearing your Shure TH53 headset just that little bit more comfortable. This is a set of Sleeves that you can slide around the ear hooks of your headset.
The Shure RPM53-CF refers to the Cable Flex part of the Shure TwinPlex TH53B headset microphones. This is a set consisting of 3 of these parts.
The Shure RPM53-CC is a spare part for Shure TwinPlex TH53 headset microphones.
If the frame of your precious Shure TwinPlex TH53 headset has become damaged, you can replace it with the RPM53-HF frame. This frame is available in three colour options for the perfect fit!
If the elastic bands of your A4SM shock mount have too much slack and no longer guarantee vibration-free suspension, then it's time to replace them with a set of fresh ones. That's where the Shure A4EB elastic bands come in.
With the Shure A4M microphone mount, you can mount your SM4 condenser microphone on a microphone stand. Thread adapter included.
The Shure RPW170 KSM8 wireless capsule in brushed nickel offers outstanding performance with the KSM8 Dualdyne cardioid dynamic microphone.
Looking to improve your wireless signal strength? The Shure PA805DB-RSMA Dual Band Passive Directional Antenna boosts the reception of GLXD4R+ half-rack receivers and GLXD+ FMDB Dual Band Frequency Managers by up to 8dB.
The Shure Nexadyne RPM280 is a compatible replacement grille for the Nexadyne NXN8/C microphone capsule.
The Shure Nexadyne RPM281 is a compatible replacement grille for the Nexadyne NXN8/S microphone capsule.
The Shure Nexadyne RPM282 is a compatible replacement grille for the Nexadyne RPW202 microphone capsule.
The Shure Nexadyne RPM283 is a compatible replacement grille for the Nexadyne RPW206 microphone capsule.
Add it to any existing Shure wireless system, and the Shure Nexadyne RPW202 capsule will give your live rig an enormous upgrade. Expect unbelievable clarity that reaches every corner of the venue thanks to Revonic Dual Engine tech.
Compact charging solution for 8 SB910M batteries with network functionality.
Network charging station for charging 2 SB910, SB920A or ADX transmitters.
Passive antenna splitter for various Shure wireless receivers.
Portable battery charger for Shure SBM and SBC battery chargers. Quickly charges batteries up to 100%.
The Shure RPW174 KSM8 wireless microphone capsule offers reliable wireless performance with the KSM8 Dualdyne cardioid dynamic microphone.
The Shure AMV-PC accessory kit for MV88+ includes a microphone clamp and telephone clamp. These accessories come standard with the MV88+ Video Kit and serve as a spare part.
